Quellcode-Bibliothek sdl030.cob   Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  SDL030.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.



      * Standard COBOL (file "SDL030.SCO") calling SQL
      * procedures in file "SDL030.MCO".
      * STANDARD COBOL (file "SDL030.SCO")  

      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1992/06/11 STANDARD COBOL LANGUAGE                          
      * NIST SQL VALIDATION TEST SUITE V6.0                          
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * SDL030.SCO                                                    
      * WRITTEN BY: DAVID W. FLATER                                  
      *                                                              
      *   THIS ROUTINE TESTS THE SCHEMA DEFINITION LANGUAGE FOR SQL. 
      *                                                              
      * REFERENCES                                                   
      *   ANSI SQL-1992                                              
      *     11.36  <grant statement>                                 
      *                                                              
      ****************************************************************



      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  tmpint PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  tmpcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *  EXEC SQL END DECLARE SECTION END-EXEC

       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "SCHANZLE" TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE uidx
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
             STOP RUN
             END-IF
             MOVE 0 TO errcnt
             DISPLAY "SQL Test Suite, V6.0, Standard COBOL, sdl030.
      -    "pco"
           DISPLAY 
           "59-byte ID"
           DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0464 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0464 "
             DISPLAY " Priv.violation: GRANT only SELECT to PUBLIC"
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE tmpint = -99
             DISPLAY "SELECT INTTEST INTO :tmpint FROM CUGINI.EE;"
      *  EXEC SQL SELECT INTTEST
      *    INTO :tmpint FROM CUGINI.EE;
             CALL "SUB2" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii
             DISPLAY "tmpint should be 0; its value is ", tmpint

             if (ii  NOT =  0  OR  tmpint  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO CUGINI.EE VALUES (9);"
      *  EXEC SQL INSERT INTO CUGINI.EE
      *    VALUES (9);
             CALL "SUB3" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) FROM CUGINI.EE;"
             COMPUTE tmpcnt = -1
      *  EXEC SQL SELECT COUNT(*) INTO :tmpcnt
      *    FROM CUGINI.EE;
             CALL "SUB4" USING SQLCODE tmpcnt
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii
             DISPLAY "COUNT should be 1; its value is ", tmpcnt

             if (ii  NOT =  0  OR  tmpcnt  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE CUGINI.EE"
             DISPLAY " SET INTTEST = 1;"
      *  EXEC SQL UPDATE CUGINI.EE
      *    SET INTTEST = 1;
             CALL "SUB5" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) FROM CUGINI.EE WHERE INTTEST = 1;"
             COMPUTE tmpcnt = -1
      *  EXEC SQL SELECT COUNT(*) INTO :tmpcnt
      *    FROM CUGINI.EE WHERE INTTEST = 1;
             CALL "SUB6" USING SQLCODE tmpcnt
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii
             DISPLAY "COUNT should be 0; its value is ", tmpcnt

             if (ii  NOT =  0  OR  tmpcnt  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DELETE FROM CUGINI.EE;"
      *  EXEC SQL DELETE FROM CUGINI.EE;
             CALL "SUB7" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) FROM CUGINI.EE;"
             COMPUTE tmpcnt = -1
      *  EXEC SQL SELECT COUNT(*) INTO :tmpcnt FROM CUGINI.EE
      * ;
             CALL "SUB8" USING SQLCODE tmpcnt
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii
             DISPLAY "COUNT should be 1; its value is ", tmpcnt

             if (ii  NOT =  0  OR  tmpcnt  NOT =  1) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB9" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0464','pass','MCO');
               CALL "SUB10" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl030.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0464','fail','MCO');
               CALL "SUB11" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB12" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0464 ********************

      ******************** BEGIN TEST0465 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0465 "
             DISPLAY " Priv.violation: GRANT only INSERT to PUBLIC"
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             DISPLAY "INSERT INTO CUGINI.FF VALUES (-99);"
      *  EXEC SQL INSERT INTO CUGINI.FF
      *    VALUES (-99);
             CALL "SUB13" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be = 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO tmpint
             DISPLAY "SELECT INTTEST INTO :tmpint FROM CUGINI.FF;"
      *  EXEC SQL SELECT INTTEST INTO :tmpint FROM CUGINI.FF
      * ;
             CALL "SUB14" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii
             DISPLAY "tmpint should NOT be -99; its value is ", tmpint

             if (ii  NOT <  0  OR  tmpint  =  -99) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE CUGINI.FF SET INTTEST = 1;"
      *  EXEC SQL UPDATE CUGINI.FF
      *    SET INTTEST = 1;
             CALL "SUB15" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DELETE FROM CUGINI.FF;"
      *  EXEC SQL DELETE FROM CUGINI.FF;
             CALL "SUB16" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB17" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0465','pass','MCO');
               CALL "SUB18" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl030.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0465','fail','MCO');
               CALL "SUB19" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB20" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0465 ********************

      ******************** BEGIN TEST0466 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0466 "
             DISPLAY " Priv.violation: GRANT only UPDATE to PUBLIC"
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             DISPLAY "UPDATE CUGINI.GG"
             DISPLAY " SET C1 = 3;"
      *  EXEC SQL UPDATE CUGINI.GG
      *    SET C1 = 3;
             CALL "SUB21" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be = 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT C1 INTO :tmpint FROM CUGINI.GG;"
             COMPUTE tmpint = -1
      *  EXEC SQL SELECT C1
      *    INTO :tmpint FROM CUGINI.GG;
             CALL "SUB22" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii
             DISPLAY "tmpint should NOT be 1 or 3; its value is ",
             tmpint

             if (ii  NOT <  0  OR  tmpint  =  1  OR  tmpint  =  3) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO CUGINI.GG VALUES (-99);"
      *  EXEC SQL INSERT INTO CUGINI.GG
      *    VALUES (-99);
             CALL "SUB23" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DELETE FROM CUGINI.GG;"
      *  EXEC SQL DELETE FROM CUGINI.GG;
             CALL "SUB24" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB25" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0466','pass','MCO');
               CALL "SUB26" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl030.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0466','fail','MCO');
               CALL "SUB27" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB28" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0466 ********************

      ******************** BEGIN TEST0467 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0467 "
             DISPLAY " Priv.violation: GRANT only DELETE to PUBLIC"
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             DISPLAY "DELETE FROM CUGINI.HH;"
      *  EXEC SQL DELETE FROM CUGINI.HH;
             CALL "SUB29" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be = 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO CUGINI.HH VALUES (99);"
      *  EXEC SQL INSERT INTO CUGINI.HH
      *    VALUES (99);
             CALL "SUB30" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             COMPUTE tmpint = -1
             DISPLAY "SELECT SMALLTEST INTO :tmpint FROM CUGINI.HH;"
      *  EXEC SQL SELECT SMALLTEST INTO :tmpint FROM CUGINI.HH
      * ;
             CALL "SUB31" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii
             DISPLAY "tmpint should NOT be 2 or 99; its value is ",
             tmpint

             if (ii  NOT <  0  OR  tmpint  =  2  OR  tmpint  =  99) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE CUGINI.HH SET SMALLTEST = -99;"
      *  EXEC SQL UPDATE CUGINI.HH
      *    SET SMALLTEST = -99;
             CALL "SUB32" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF


      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB33" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0467','pass','MCO');
               CALL "SUB34" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl030.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0467','fail','MCO');
               CALL "SUB35" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB36" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0467 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements