Quelle  sdm845-lg-common.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: GPL-2.0
/*
 * SDM845 LG G7 / V35 (judyln / judyp) common device tree
 *
 * Copyright (c) 2022, The Linux Foundation. All rights reserved.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"

/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
/delete-node/ &gpu_mem;
/delete-node/ &ipa_fw_mem;
/delete-node/ &mba_region;
/delete-node/ &mpss_region;
/delete-node/ &qseecom_mem;
/delete-node/ &rmtfs_mem;
/delete-node/ &slpi_mem;
/delete-node/ &spss_mem;
/delete-node/ &venus_mem;
/delete-node/ &wlan_msa_mem;

/ {
 chosen {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  qseecom_mem: memory@b2000000 {
   reg = <0 0xb2000000 0 0x1800000>;
   no-map;
  };

  gpu_mem: memory@8c415000 {
   reg = <0 0x8c415000 0 0x2000>;
   no-map;
  };

  ipa_fw_mem: memory@8c400000 {
   reg = <0 0x8c400000 0 0x10000>;
   no-map;
  };

  adsp_mem: memory@8c500000 {
   reg = <0 0x8c500000 0 0x1e00000>;
   no-map;
  };

  wlan_msa_mem: memory@8e300000 {
   reg = <0 0x8e300000 0 0x100000>;
   no-map;
  };

  mpss_region: memory@8e400000 {
   reg = <0 0x8e400000 0 0x8900000>;
   no-map;
  };

  venus_mem: memory@96d00000 {
   reg = <0 0x96d00000 0 0x500000>;
   no-map;
  };

  cdsp_mem: memory@97200000 {
   reg = <0 0x97200000 0 0x800000>;
   no-map;
  };

  mba_region: memory@97a00000 {
   reg = <0 0x97a00000 0 0x200000>;
   no-map;
  };

  slpi_mem: memory@97c00000 {
   reg = <0 0x97c00000 0 0x1400000>;
   no-map;
  };

  spss_mem: memory@99000000 {
   reg = <0 0x99000000 0 0x100000>;
   no-map;
  };

  /* Framebuffer region */
  memory@9d400000 {
   reg = <0x0 0x9d400000 0x0 0x2400000>;
   no-map;
  };

  /* rmtfs lower guard */
  memory@f0800000 {
   reg = <0 0xf0800000 0 0x1000>;
   no-map;
  };

  rmtfs_mem: memory@f0801000 {
   compatible = "qcom,rmtfs-mem";
   reg = <0 0xf0801000 0 0x200000>;
   no-map;

   qcom,client-id = <1>;
   qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  };

  /* rmtfs upper guard */
  memory@f0a01000 {
   reg = <0 0xf0a01000 0 0x1000>;
   no-map;
  };
 };

 gpio-keys {
  compatible = "gpio-keys";

  pinctrl-names = "default";
  pinctrl-0 = <&vol_up_pin_a>;

  label = "GPIO Buttons";

  key-vol-up {
   label = "Volume up";
   linux,code = <KEY_VOLUMEUP>;
   gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
  };
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;
 };

 /*
  * Apparently RPMh does not provide support for PM8998 S4 because it
  * is always-on; model it as a fixed regulator.
  */
 vreg_s4a_1p8: pm8998-smps4-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vreg_s4a_1p8";

  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;

  regulator-always-on;
  regulator-boot-on;

  vin-supply = <&vph_pwr>;
 };
};

&adsp_pas {
 status = "okay";
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8998-rpmh-regulators";
  qcom,pmic-id = "a";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;
  vdd-s9-supply = <&vph_pwr>;
  vdd-s10-supply = <&vph_pwr>;
  vdd-s11-supply = <&vph_pwr>;
  vdd-s12-supply = <&vph_pwr>;
  vdd-s13-supply = <&vph_pwr>;
  vdd-l1-l27-supply = <&vreg_s7a_1p025>;
  vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
  vdd-l3-l11-supply = <&vreg_s7a_1p025>;
  vdd-l4-l5-supply = <&vreg_s7a_1p025>;
  vdd-l6-supply = <&vph_pwr>;
  vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
  vdd-l9-supply = <&vreg_bob>;
  vdd-l10-l23-l25-supply = <&vreg_bob>;
  vdd-l13-l19-l21-supply = <&vreg_bob>;
  vdd-l16-l28-supply = <&vreg_bob>;
  vdd-l18-l22-supply = <&vreg_bob>;
  vdd-l20-l24-supply = <&vreg_bob>;
  vdd-l26-supply = <&vreg_s3a_1p35>;
  vin-lvs-1-2-supply = <&vreg_s4a_1p8>;

  vreg_s2a_1p125: smps2 {
   regulator-min-microvolt = <1100000>;
   regulator-max-microvolt = <1100000>;
  };

  vreg_s3a_1p35: smps3 {
   regulator-min-microvolt = <1352000>;
   regulator-max-microvolt = <1352000>;
  };

  vreg_s5a_2p04: smps5 {
   regulator-min-microvolt = <1904000>;
   regulator-max-microvolt = <2040000>;
  };

  vreg_s7a_1p025: smps7 {
   regulator-min-microvolt = <900000>;
   regulator-max-microvolt = <1028000>;
  };

  vdd_qusb_hs0:
  vdda_hp_pcie_core:
  vdda_mipi_csi0_0p9:
  vdda_mipi_csi1_0p9:
  vdda_mipi_csi2_0p9:
  vdda_mipi_dsi0_pll:
  vdda_mipi_dsi1_pll:
  vdda_qlink_lv:
  vdda_qlink_lv_ck:
  vdda_qrefs_0p875:
  vdda_pcie_core:
  vdda_pll_cc_ebi01:
  vdda_pll_cc_ebi23:
  vdda_sp_sensor:
  vdda_ufs1_core:
  vdda_ufs2_core:
  vdda_usb1_ss_core:
  vdda_usb2_ss_core:
  vreg_l1a_0p875: ldo1 {
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <880000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_10:
  vreg_l2a_1p2: ldo2 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-always-on;
  };

  vreg_l3a_1p0: ldo3 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdd_wcss_cx:
  vdd_wcss_mx:
  vdda_wcss_pll:
  vreg_l5a_0p8: ldo5 {
   regulator-min-microvolt = <800000>;
   regulator-max-microvolt = <800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_13:
  vreg_l6a_1p8: ldo6 {
   regulator-min-microvolt = <1856000>;
   regulator-max-microvolt = <1856000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7a_1p8: ldo7 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8a_1p2: ldo8 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1248000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9a_1p8: ldo9 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10a_1p8: ldo10 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11a_1p0: ldo11 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1048000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdd_qfprom:
  vdd_qfprom_sp:
  vdda_apc1_cs_1p8:
  vdda_gfx_cs_1p8:
  vdda_qrefs_1p8:
  vdda_qusb_hs0_1p8:
  vddpx_11:
  vreg_l12a_1p8: ldo12 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_2:
  vreg_l13a_2p95: ldo13 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14a_1p88: ldo14 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1880000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15a_1p8: ldo15 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17a_1p3: ldo17 {
   regulator-min-microvolt = <1304000>;
   regulator-max-microvolt = <1304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l18a_2p7: ldo18 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l20a_2p95: ldo20 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l21a_2p95: ldo21 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l22a_2p85: ldo22 {
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l23a_3p3: ldo23 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_qusb_hs0_3p1:
  vreg_l24a_3p075: ldo24 {
   regulator-min-microvolt = <3088000>;
   regulator-max-microvolt = <3088000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l25a_3p3: ldo25 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_hp_pcie_1p2:
  vdda_hv_ebi0:
  vdda_hv_ebi1:
  vdda_hv_ebi2:
  vdda_hv_ebi3:
  vdda_mipi_csi_1p25:
  vdda_mipi_dsi0_1p2:
  vdda_mipi_dsi1_1p2:
  vdda_pcie_1p2:
  vdda_ufs1_1p2:
  vdda_ufs2_1p2:
  vdda_usb1_ss_1p2:
  vdda_usb2_ss_1p2:
  vreg_l26a_1p2: ldo26 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l28a_3p0: ldo28 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_lvs1a_1p8: lvs1 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
  };

  vreg_lvs2a_1p8: lvs2 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
  };
 };

 regulators-1 {
  compatible = "qcom,pmi8998-rpmh-regulators";
  qcom,pmic-id = "b";

  vdd-bob-supply = <&vph_pwr>;

  vreg_bob: bob {
   regulator-min-microvolt = <3312000>;
   regulator-max-microvolt = <3600000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
   regulator-allow-bypass;
  };
 };

 regulators-2 {
  compatible = "qcom,pm8005-rpmh-regulators";
  qcom,pmic-id = "c";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;

  vreg_s3c_0p6: smps3 {
   regulator-min-microvolt = <600000>;
   regulator-max-microvolt = <600000>;
  };
 };
};

&cdsp_pas {
 status = "okay";
};

&dispcc {
 status = "disabled";
};

&gcc {
 protected-clocks = <GCC_QSPI_CORE_CLK>,
      <GCC_QSPI_CORE_CLK_SRC>,
      <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
      <GCC_LPASS_Q6_AXI_CLK>,
      <GCC_LPASS_SWAY_CLK>;
};

&gpu {
 status = "okay";

 zap-shader {
  memory-region = <&gpu_mem>;
 };
};

&ipa {
 qcom,gsi-loader = "modem";
 status = "okay";
};

&mss_pil {
 status = "okay";
};

&pm8998_resin {
 linux,code = <KEY_VOLUMEDOWN>;
 status = "okay";
};

&sdhc_2 {
 status = "okay";

 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;

 pinctrl-names = "default";
 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;

 vmmc-supply = <&vreg_l21a_2p95>;
 vqmmc-supply = <&vddpx_2>;
};

/*
 * UFS works partially and only with clk_ignore_unused.
 * Sometimes it crashes with I/O errors.
 */
&ufs_mem_hc {
 status = "okay";

 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;

 vcc-supply = <&vreg_l20a_2p95>;
 vcc-max-microamp = <600000>;
};

&ufs_mem_phy {
 status = "okay";

 vdda-phy-supply = <&vdda_ufs1_core>;
 vdda-pll-supply = <&vdda_ufs1_1p2>;
};

&usb_1 {
 status = "okay";
};

&usb_1_dwc3 {
 /* TODO: these devices have usb id pin */
 dr_mode = "peripheral";
};

&usb_1_hsphy {
 status = "okay";

 vdd-supply = <&vdda_usb1_ss_core>;
 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;

 qcom,imp-res-offset-value = <8>;
 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
};

&usb_1_qmpphy {
 status = "okay";

 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 vdda-pll-supply = <&vdda_usb1_ss_core>;
};

/* PINCTRL - additions to nodes defined in sdm845.dtsi */

&tlmm {
 gpio-reserved-ranges = <28 4>, <81 4>;

 sdc2_clk: sdc2-clk-state {
  pins = "sdc2_clk";
  bias-disable;

  /*
   * It seems that mmc_test reports errors if drive
   * strength is not 16 on clk, cmd, and data pins.
   *
   * TODO: copy-pasted from mtp, try other values
   * on these devices.
   */
  drive-strength = <16>;
 };

 sdc2_cmd: sdc2-cmd-state {
  pins = "sdc2_cmd";
  bias-pull-up;
  drive-strength = <16>;
 };

 sdc2_data: sdc2-data-state {
  pins = "sdc2_data";
  bias-pull-up;
  drive-strength = <16>;
 };

 sd_card_det_n: sd-card-det-n-state {
  pins = "gpio126";
  function = "gpio";
  bias-pull-up;
 };
};

&pm8998_gpios {
 vol_up_pin_a: vol-up-active-state {
  pins = "gpio6";
  function = "normal";
  input-enable;
  bias-pull-up;
  qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 };
};