Quelle  sc7180-trogdor-pompom.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Google Pompom board device tree source
 *
 * Copyright 2020 Google LLC.
 */

#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-clamshell.dtsi"
#include "sc7180-trogdor-rt5682i-sku.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"

/ {
 thermal-zones {
  choke-5v-thermal {
   thermal-sensors = <&pm6150_adc_tm 1>;

   trips {
    choke-5v-crit {
     temperature = <125000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };
  };
 };
};

&alc5682 {
 realtek,dmic-clk-driving-high;
};

&ap_tp_i2c {
 status = "okay";
};

&cpu6_alert0 {
 temperature = <60000>;
};

&cpu6_alert1 {
 temperature = <65000>;
};

&cpu6_thermal {
 sustainable-power = <1124>;
};

&cpu7_alert0 {
 temperature = <60000>;
};

&cpu7_alert1 {
 temperature = <65000>;
};

&cpu7_thermal {
 sustainable-power = <1124>;
};

&cpu8_alert0 {
 temperature = <60000>;
};

&cpu8_alert1 {
 temperature = <65000>;
};

&cpu8_thermal {
 sustainable-power = <1124>;
};

&cpu9_alert0 {
 temperature = <60000>;
};

&cpu9_alert1 {
 temperature = <65000>;
};

&cpu9_thermal {
 sustainable-power = <1124>;
};

&gpio_keys {
 status = "okay";
};

ap_ts_pen_1v8: &i2c4 {
 status = "okay";
 clock-frequency = <400000>;

 ap_ts: touchscreen@10 {
  compatible = "hid-over-i2c";
  reg = <0x10>;
  pinctrl-names = "default";
  pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;

  interrupt-parent = <&tlmm>;
  interrupts = <9 IRQ_TYPE_LEVEL_LOW>;

  panel = <&panel>;
  post-power-on-delay-ms = <20>;
  hid-descr-addr = <0x0001>;

  vdd-supply = <&pp3300_ts>;
 };
};

&keyboard_controller {
 function-row-physmap = <
  MATRIX_KEY(0x00, 0x02, 0) /* T1 */
  MATRIX_KEY(0x03, 0x02, 0) /* T2 */
  MATRIX_KEY(0x02, 0x02, 0) /* T3 */
  MATRIX_KEY(0x01, 0x02, 0) /* T4 */
  MATRIX_KEY(0x03, 0x04, 0) /* T5 */
  MATRIX_KEY(0x02, 0x04, 0) /* T6 */
  MATRIX_KEY(0x01, 0x04, 0) /* T7 */
  MATRIX_KEY(0x02, 0x09, 0) /* T8 */
  MATRIX_KEY(0x01, 0x09, 0) /* T9 */
  MATRIX_KEY(0x00, 0x04, 0) /* T10 */
 >;
 linux,keymap = <
  MATRIX_KEY(0x00, 0x02, KEY_BACK)
  MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
  MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
  MATRIX_KEY(0x01, 0x02, KEY_SCALE)
  MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
  MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
  MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
  MATRIX_KEY(0x02, 0x09, KEY_MUTE)
  MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
  MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)

  CROS_STD_MAIN_KEYMAP
 >;
};

&panel {
 compatible = "edp-panel";
};

&pen_insert {
 /* Insert = high, eject = low */
 gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
};

&pm6150_adc {
 channel@4e {
  reg = <ADC5_AMUX_THM2_100K_PU>;
  qcom,ratiometric;
  qcom,hw-settle-time = <200>;
  label = "5v_choke_therm";
 };
};

&pm6150_adc_tm {
 status = "okay";

 5v-choke-thermistor@1 {
  reg = <1>;
  io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
  qcom,ratiometric;
  qcom,hw-settle-time-us = <200>;
 };
};

&sdhc_2 {
 status = "okay";
};

&sound {
 model = "sc7180-rt5682-max98357a-2mic";
 pinctrl-names = "default";
 pinctrl-0 = <&dmic_sel>;
 dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
};

&usb_c1 {
 status = "disabled";
};

&wifi {
 qcom,calibration-variant = "GO_POMPOM";
};

/* PINCTRL - board-specific pinctrl */

&tlmm {
 gpio-line-names = "TP_INT_ODL",
     "AP_RAM_ID0",
     "AP_SKU_ID2",
     "AP_RAM_ID1",
     "",
     "AP_RAM_ID2",
     "AP_TP_I2C_SDA",
     "AP_TP_I2C_SCL",
     "TS_RESET_L",
     "TS_INT_L",
     "",
     "EDP_BRIJ_IRQ",
     "AP_EDP_BKLTEN",
     "",
     "",
     "EDP_BRIJ_I2C_SDA",
     "EDP_BRIJ_I2C_SCL",
     "HUB_RST_L",
     "",
     "",
     "",
     "",
     "",
     "AMP_EN",
     "P_SENSOR_INT_L",
     "AP_SAR_SENSOR_SDA",
     "AP_SAR_SENSOR_SCL",
     "",
     "HP_IRQ",
     "",
     "EN_PP3300_DX_EDP",
     "AP_BRD_ID2",
     "BRIJ_SUSPEND",
     "AP_BRD_ID0",
     "AP_H1_SPI_MISO",
     "AP_H1_SPI_MOSI",
     "AP_H1_SPI_CLK",
     "AP_H1_SPI_CS_L",
     "",
     "",
     "",
     "",
     "H1_AP_INT_ODL",
     "",
     "UART_AP_TX_DBG_RX",
     "UART_DBG_TX_AP_RX",
     "HP_I2C_SDA",
     "HP_I2C_SCL",
     "FORCED_USB_BOOT",
     "AMP_BCLK",
     "AMP_LRCLK",
     "AMP_DIN",
     "PEN_PDCT_L",
     "HP_BCLK",
     "HP_LRCLK",
     "HP_DOUT",
     "HP_DIN",
     "HP_MCLK",
     "AP_SKU_ID0",
     "AP_EC_SPI_MISO",
     "AP_EC_SPI_MOSI",
     "AP_EC_SPI_CLK",
     "AP_EC_SPI_CS_L",
     "AP_SPI_CLK",
     "AP_SPI_MOSI",
     "AP_SPI_MISO",
     /*
      * AP_FLASH_WP_L is crossystem ABI. Schematics
      * call it BIOS_FLASH_WP_L.
      */
     "AP_FLASH_WP_L",
     "",
     "AP_SPI_CS0_L",
     "SD_CD_ODL",
     "",
     "",
     "",
     "",
     "",
     "UIM2_DATA",
     "UIM2_CLK",
     "UIM2_RST",
     "UIM2_PRESENT",
     "UIM1_DATA",
     "UIM1_CLK",
     "UIM1_RST",
     "",
     "EN_PP3300_CODEC",
     "EN_PP3300_HUB",
     "",
     "DMIC_SEL",
     "",
     "",
     "",
     "AP_SKU_ID1",
     "AP_RST_REQ",
     "",
     "AP_BRD_ID1",
     "AP_EC_INT_R_L",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "EDP_BRIJ_EN",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "AP_TS_PEN_I2C_SDA",
     "AP_TS_PEN_I2C_SCL",
     "DP_HOT_PLUG_DET",
     "EC_IN_RW_ODL";

 dmic_sel: dmic-sel-state {
  pins = "gpio86";
  function = "gpio";
  bias-pull-down;
 };
};