Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/allwinner/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 3 kB image not shown  

Quelle  sun50i-h616-x96-mate.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (C) 2021 Arm Ltd.
 */

/dts-v1/;

#include "sun50i-h616.dtsi"
#include "sun50i-h616-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
 model = "X96 Mate";
 compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";

 aliases {
  serial0 = &uart0;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 reg_vcc5v: vcc5v {
  /* board wide 5V supply directly from the DC input */
  compatible = "regulator-fixed";
  regulator-name = "vcc-5v";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
 };
};

&codec {
 allwinner,audio-routing = "Line Out", "LINEOUT";
 status = "okay";
};

&cpu0 {
 cpu-supply = <®_dcdca>;
};

&ehci0 {
 status = "okay";
};

&ehci2 {
 status = "okay";
};

&gpu {
 mali-supply = <®_dcdcc>;
 status = "okay";
};

&ir {
 status = "okay";
};

&mmc0 {
 vmmc-supply = <®_dcdce>;
 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 disable-wp;
 bus-width = <4>;
 status = "okay";
};

&mmc2 {
 vmmc-supply = <®_dcdce>;
 vqmmc-supply = <®_bldo1>;
 bus-width = <8>;
 non-removable;
 cap-mmc-hw-reset;
 mmc-ddr-1_8v;
 mmc-hs200-1_8v;
 status = "okay";
};

&ohci0 {
 status = "okay";
};

&ohci2 {
 status = "okay";
};

&r_rsb {
 status = "okay";

 axp305: pmic@745 {
  compatible = "x-powers,axp305", "x-powers,axp805",
        "x-powers,axp806";
  interrupt-controller;
  #interrupt-cells = <1>;
  reg = <0x745>;

  x-powers,self-working-mode;
  vina-supply = <®_vcc5v>;
  vinb-supply = <®_vcc5v>;
  vinc-supply = <®_vcc5v>;
  vind-supply = <®_vcc5v>;
  vine-supply = <®_vcc5v>;
  aldoin-supply = <®_vcc5v>;
  bldoin-supply = <®_vcc5v>;
  cldoin-supply = <®_vcc5v>;

  regulators {
   reg_aldo1: aldo1 {
    regulator-always-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-name = "vcc-sys";
   };

   /* Enabled by the Android BSP */
   reg_aldo2: aldo2 {
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-name = "vcc3v3-ext";
    status = "disabled";
   };

   /* Enabled by the Android BSP */
   reg_aldo3: aldo3 {
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-name = "vcc3v3-ext2";
    status = "disabled";
   };

   reg_bldo1: bldo1 {
    regulator-always-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-name = "vcc1v8";
   };

   /* Enabled by the Android BSP */
   reg_bldo2: bldo2 {
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-name = "vcc1v8-2";
    status = "disabled";
   };

   bldo3 {
    /* unused */
   };

   bldo4 {
    /* unused */
   };

   cldo1 {
    regulator-min-microvolt = <2500000>;
    regulator-max-microvolt = <2500000>;
    regulator-name = "vcc2v5";
   };

   cldo2 {
    /* unused */
   };

   cldo3 {
    /* unused */
   };

   reg_dcdca: dcdca {
    regulator-always-on;
    regulator-min-microvolt = <810000>;
    regulator-max-microvolt = <1100000>;
    regulator-name = "vdd-cpu";
   };

   reg_dcdcc: dcdcc {
    regulator-always-on;
    regulator-min-microvolt = <810000>;
    regulator-max-microvolt = <990000>;
    regulator-name = "vdd-gpu-sys";
   };

   reg_dcdcd: dcdcd {
    regulator-always-on;
    regulator-min-microvolt = <1360000>;
    regulator-max-microvolt = <1360000>;
    regulator-name = "vdd-dram";
   };

   reg_dcdce: dcdce {
    regulator-always-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-name = "vcc-eth-mmc";
   };

   sw {
    /* unused */
   };
  };
 };
};

&uart0 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart0_ph_pins>;
 status = "okay";
};

&usbotg {
 dr_mode = "host"; /* USB A type receptable */
 status = "okay";
};

&usbphy {
 status = "okay";
};

[ Dauer der Verarbeitung: 0.2 Sekunden  (vorverarbeitet)  ]