Quelle  wlf,wm8904.yaml   Sprache: unbekannt

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/wlf,wm8904.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Wolfson WM8904/WM8912 audio codecs

maintainers:
  - patches@opensource.cirrus.com

description: |
  Pins on the device (for linking into audio routes):
  IN1L, IN1R, IN2L, IN2R, IN3L, IN3R, HPOUTL, HPOUTR, LINEOUTL, LINEOUTR,
  MICBIAS

properties:
  compatible:
    enum:
      - wlf,wm8904
      - wlf,wm8912

  reg:
    maxItems: 1

  "#sound-dai-cells":
    const: 0

  clocks:
    maxItems: 1

  clock-names:
    const: mclk

  AVDD-supply: true
  CPVDD-supply: true
  DBVDD-supply: true
  DCVDD-supply: true
  MICVDD-supply: true

  wlf,in1l-as-dmicdat1:
    type: boolean
    description:
      Use IN1L/DMICDAT1 as DMICDAT1, enabling the DMIC input path.
      Can be used separately or together with wlf,in1r-as-dmicdat2.

  wlf,in1r-as-dmicdat2:
    type: boolean
    description:
      Use IN1R/DMICDAT2 as DMICDAT2, enabling the DMIC input path.
      Can be used separately or together with wlf,in1l-as-dmicdat1.

  wlf,gpio-cfg:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 4
    maxItems: 4
    description:
      Default register values for R121/122/123/124 (GPIO Control).
      If any entry has the value 0xFFFF, the related register won't be set.
    default: [0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF]

  wlf,micbias-cfg:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 2
    maxItems: 2
    description:
      Default register values for R6/R7 (Mic Bias Control).
    default: [0, 0]

  wlf,drc-cfg-names:
    $ref: /schemas/types.yaml#/definitions/string-array
    description:
      List of strings for the available DRC modes.
      If absent, DRC is disabled.

  wlf,drc-cfg-regs:
    $ref: /schemas/types.yaml#/definitions/uint16-matrix
    description:
      Sets of default register values for R40/41/42/43 (DRC).
      Each set corresponds to a DRC mode, so the number of sets should equal
      the length of wlf,drc-cfg-names.
      If absent, DRC is disabled.
    items:
      minItems: 4
      maxItems: 4

  wlf,retune-mobile-cfg-names:
    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
    description:
      List of strings for the available retune modes.
      If absent, retune is disabled.

  wlf,retune-mobile-cfg-hz:
    description:
      The list must be the same length as wlf,retune-mobile-cfg-names.
      If absent, retune is disabled.

  wlf,retune-mobile-cfg-regs:
    $ref: /schemas/types.yaml#/definitions/uint16-matrix
    description:
      Sets of default register values for R134/.../157 (EQ).
      Each set corresponds to a retune mode, so the number of sets should equal
      the length of wlf,retune-mobile-cfg-names.
      If absent, retune is disabled.
    items:
      minItems: 24
      maxItems: 24

dependencies:
  wlf,drc-cfg-names: [ 'wlf,drc-cfg-regs' ]
  wlf,drc-cfg-regs: [ 'wlf,drc-cfg-names' ]

  wlf,retune-mobile-cfg-names: [ 'wlf,retune-mobile-cfg-hz', 'wlf,retune-mobile-cfg-regs' ]
  wlf,retune-mobile-cfg-regs: [ 'wlf,retune-mobile-cfg-names', 'wlf,retune-mobile-cfg-hz' ]
  wlf,retune-mobile-cfg-hz: [ 'wlf,retune-mobile-cfg-names', 'wlf,retune-mobile-cfg-regs' ]

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - AVDD-supply
  - CPVDD-supply
  - DBVDD-supply
  - DCVDD-supply
  - MICVDD-supply

allOf:
  - $ref: dai-common.yaml#

unevaluatedProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        codec@1a {
            compatible = "wlf,wm8904";
            reg = <0x1a>;
            clocks = <&pck0>;
            clock-names = "mclk";
            AVDD-supply = <®_1p8v>;
            CPVDD-supply = <®_1p8v>;
            DBVDD-supply = <®_1p8v>;
            DCVDD-supply = <®_1p8v>;
            MICVDD-supply = <®_1p8v>;

            wlf,drc-cfg-names = "default", "peaklimiter", "tradition", "soft",
                                "music";
            /*
             * Config registers per name, respectively:
             * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
             * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
             * KNEE_IP = -42, KNEE_OP = -3,    HI_COMP = 0,   LO_COMP = 1
             * KNEE_IP = -45, KNEE_OP = -9,    HI_COMP = 1/8, LO_COMP = 1
             * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
             */
            wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
                               /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
                               /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
                               /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
                               /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;

            /* GPIO1 = DMIC_CLK, don't touch others */
            wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;

            /* Use IN1R as DMICDAT2, leave IN1L as an analog input path */
            wlf,in1r-as-dmicdat2;

            wlf,retune-mobile-cfg-names = "bassboost", "bassboost", "treble";
            wlf,retune-mobile-cfg-hz = <48000>, <44100>, <48000>;
            /*
             * Config registers per name, respectively:
             * EQ_ENA,  100 Hz,  300 Hz,  875 Hz, 2400 Hz, 6900 Hz
             *      1,   +6 dB,   +3 dB,    0 dB,    0 dB,    0 dB
             *      1,   +6 dB,   +3 dB,    0 dB,    0 dB,    0 dB
             *      1,   -2 dB,   -2 dB,    0 dB,    0 dB,   +3 dB
             * Each one uses the defaults for ReTune Mobile registers 140-157
             */
            wlf,retune-mobile-cfg-regs = /bits/ 16 <0x1 0x12 0xf 0xc 0xc 0xc
                                                    0x0fca 0x0400 0x00d8 0x1eb5
                                                    0xf145 0x0bd5 0x0075 0x1c58
                                                    0xf3d3 0x0a54 0x0568 0x168e
                                                    0xf829 0x07ad 0x1103 0x0564
                                                    0x0559 0x4000>,

                                         /bits/ 16 <0x1 0x12 0xf 0xc 0xc 0xc
                                                    0x0fca 0x0400 0x00d8 0x1eb5
                                                    0xf145 0x0bd5 0x0075 0x1c58
                                                    0xf3d3 0x0a54 0x0568 0x168e
                                                    0xf829 0x07ad 0x1103 0x0564
                                                    0x0559 0x4000>,

                                         /bits/ 16 <0x1 0xa 0xa 0xc 0xc 0xf
                                                    0x0fca 0x0400 0x00d8 0x1eb5
                                                    0xf145 0x0bd5 0x0075 0x1c58
                                                    0xf3d3 0x0a54 0x0568 0x168e
                                                    0xf829 0x07ad 0x1103 0x0564
                                                    0x0559 0x4000>;
        };
    };