Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/sysui/desktop/macosx/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 288 B image not shown  

Quelle  pci-txe.c   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2013-2020, Intel Corporation. All rights reserved.
 * Intel Management Engine Interface (Intel MEI) Linux driver
 */


#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>

#include <linux/mei.h>


#include "mei_dev.h"
#include "hw-txe.h"

static const struct pci_device_id mei_txe_pci_tbl[] = {
 {PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */
 {PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */

 {0, }
};
MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);

#ifdef CONFIG_PM
static inline void mei_txe_set_pm_domain(struct mei_device *dev);
static inline void mei_txe_unset_pm_domain(struct mei_device *dev);
#else
static inline void mei_txe_set_pm_domain(struct mei_device *dev) {}
static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {}
#endif /* CONFIG_PM */

/**
 * mei_txe_probe - Device Initialization Routine
 *
 * @pdev: PCI device structure
 * @ent: entry in mei_txe_pci_tbl
 *
 * Return: 0 on success, <0 on failure.
 */

static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
 struct mei_device *dev;
 struct mei_txe_hw *hw;
 const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR);
 int err;

 /* enable pci dev */
 err = pcim_enable_device(pdev);
 if (err) {
  dev_err(&pdev->dev, "failed to enable pci device.\n");
  goto end;
 }
 /* set PCI host mastering  */
 pci_set_master(pdev);
 /* pci request regions and mapping IO device memory for mei driver */
 err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME);
 if (err) {
  dev_err(&pdev->dev, "failed to get pci regions.\n");
  goto end;
 }

 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(36));
 if (err) {
  err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
  if (err) {
   dev_err(&pdev->dev, "No suitable DMA available.\n");
   goto end;
  }
 }

 /* allocates and initializes the mei dev structure */
 dev = mei_txe_dev_init(pdev);
 if (!dev) {
  err = -ENOMEM;
  goto end;
 }
 hw = to_txe_hw(dev);
 hw->mem_addr = pcim_iomap_table(pdev);

 pci_enable_msi(pdev);

 /* clear spurious interrupts */
 mei_clear_interrupts(dev);

 /* request and enable interrupt  */
 if (pci_dev_msi_enabled(pdev))
  err = request_threaded_irq(pdev->irq,
   NULL,
   mei_txe_irq_thread_handler,
   IRQF_ONESHOT, KBUILD_MODNAME, dev);
 else
  err = request_threaded_irq(pdev->irq,
   mei_txe_irq_quick_handler,
   mei_txe_irq_thread_handler,
   IRQF_SHARED, KBUILD_MODNAME, dev);
 if (err) {
  dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
   pdev->irq);
  goto end;
 }

 if (mei_start(dev)) {
  dev_err(&pdev->dev, "init hw failure.\n");
  err = -ENODEV;
  goto release_irq;
 }

 pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT);
 pm_runtime_use_autosuspend(&pdev->dev);

 err = mei_register(dev, &pdev->dev);
 if (err)
  goto stop;

 pci_set_drvdata(pdev, dev);

 /*
 * MEI requires to resume from runtime suspend mode
 * in order to perform link reset flow upon system suspend.
 */

 dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);

 /*
 * TXE maps runtime suspend/resume to own power gating states,
 * hence we need to go around native PCI runtime service which
 * eventually brings the device into D3cold/hot state.
 * But the TXE device cannot wake up from D3 unlike from own
 * power gating. To get around PCI device native runtime pm,
 * TXE uses runtime pm domain handlers which take precedence.
 */

 mei_txe_set_pm_domain(dev);

 pm_runtime_put_noidle(&pdev->dev);

 return 0;

stop:
 mei_stop(dev);
release_irq:
 mei_cancel_work(dev);
 mei_disable_interrupts(dev);
 free_irq(pdev->irq, dev);
end:
 dev_err(&pdev->dev, "initialization failed.\n");
 return err;
}

/**
 * mei_txe_shutdown- Device Shutdown Routine
 *
 * @pdev: PCI device structure
 *
 *  mei_txe_shutdown is called from the reboot notifier
 *  it's a simplified version of remove so we go down
 *  faster.
 */

static void mei_txe_shutdown(struct pci_dev *pdev)
{
 struct mei_device *dev = pci_get_drvdata(pdev);

 dev_dbg(&pdev->dev, "shutdown\n");
 mei_stop(dev);

 mei_txe_unset_pm_domain(dev);

 mei_disable_interrupts(dev);
 free_irq(pdev->irq, dev);
}

/**
 * mei_txe_remove - Device Removal Routine
 *
 * @pdev: PCI device structure
 *
 * mei_remove is called by the PCI subsystem to alert the driver
 * that it should release a PCI device.
 */

static void mei_txe_remove(struct pci_dev *pdev)
{
 struct mei_device *dev = pci_get_drvdata(pdev);

 pm_runtime_get_noresume(&pdev->dev);

 mei_stop(dev);

 mei_txe_unset_pm_domain(dev);

 mei_disable_interrupts(dev);
 free_irq(pdev->irq, dev);

 mei_deregister(dev);
}


#ifdef CONFIG_PM_SLEEP
static int mei_txe_pci_suspend(struct device *device)
{
 struct pci_dev *pdev = to_pci_dev(device);
 struct mei_device *dev = pci_get_drvdata(pdev);

 dev_dbg(&pdev->dev, "suspend\n");

 mei_stop(dev);

 mei_disable_interrupts(dev);

 free_irq(pdev->irq, dev);
 pci_disable_msi(pdev);

 return 0;
}

static int mei_txe_pci_resume(struct device *device)
{
 struct pci_dev *pdev = to_pci_dev(device);
 struct mei_device *dev = pci_get_drvdata(pdev);
 int err;

 pci_enable_msi(pdev);

 mei_clear_interrupts(dev);

 /* request and enable interrupt */
 if (pci_dev_msi_enabled(pdev))
  err = request_threaded_irq(pdev->irq,
   NULL,
   mei_txe_irq_thread_handler,
   IRQF_ONESHOT, KBUILD_MODNAME, dev);
 else
  err = request_threaded_irq(pdev->irq,
   mei_txe_irq_quick_handler,
   mei_txe_irq_thread_handler,
   IRQF_SHARED, KBUILD_MODNAME, dev);
 if (err) {
  dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
    pdev->irq);
  return err;
 }

 err = mei_restart(dev);

 return err;
}
#endif /* CONFIG_PM_SLEEP */

#ifdef CONFIG_PM
static int mei_txe_pm_runtime_idle(struct device *device)
{
 struct mei_device *dev = dev_get_drvdata(device);

 dev_dbg(device, "rpm: txe: runtime_idle\n");

 if (mei_write_is_idle(dev))
  pm_runtime_autosuspend(device);

 return -EBUSY;
}
static int mei_txe_pm_runtime_suspend(struct device *device)
{
 struct mei_device *dev = dev_get_drvdata(device);
 int ret;

 dev_dbg(device, "rpm: txe: runtime suspend\n");

 mutex_lock(&dev->device_lock);

 if (mei_write_is_idle(dev))
  ret = mei_txe_aliveness_set_sync(dev, 0);
 else
  ret = -EAGAIN;

 /* keep irq on we are staying in D0 */

 dev_dbg(device, "rpm: txe: runtime suspend ret=%d\n", ret);

 mutex_unlock(&dev->device_lock);

 if (ret && ret != -EAGAIN)
  schedule_work(&dev->reset_work);

 return ret;
}

static int mei_txe_pm_runtime_resume(struct device *device)
{
 struct mei_device *dev = dev_get_drvdata(device);
 int ret;

 dev_dbg(device, "rpm: txe: runtime resume\n");

 mutex_lock(&dev->device_lock);

 mei_enable_interrupts(dev);

 ret = mei_txe_aliveness_set_sync(dev, 1);

 mutex_unlock(&dev->device_lock);

 dev_dbg(device, "rpm: txe: runtime resume ret = %d\n", ret);

 if (ret)
  schedule_work(&dev->reset_work);

 return ret;
}

/**
 * mei_txe_set_pm_domain - fill and set pm domain structure for device
 *
 * @dev: mei_device
 */

static inline void mei_txe_set_pm_domain(struct mei_device *dev)
{
 struct pci_dev *pdev  = to_pci_dev(dev->dev);

 if (pdev->dev.bus && pdev->dev.bus->pm) {
  dev->pg_domain.ops = *pdev->dev.bus->pm;

  dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend;
  dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume;
  dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle;

  dev_pm_domain_set(&pdev->dev, &dev->pg_domain);
 }
}

/**
 * mei_txe_unset_pm_domain - clean pm domain structure for device
 *
 * @dev: mei_device
 */

static inline void mei_txe_unset_pm_domain(struct mei_device *dev)
{
 /* stop using pm callbacks if any */
 dev_pm_domain_set(dev->dev, NULL);
}

static const struct dev_pm_ops mei_txe_pm_ops = {
 SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend,
    mei_txe_pci_resume)
 SET_RUNTIME_PM_OPS(
  mei_txe_pm_runtime_suspend,
  mei_txe_pm_runtime_resume,
  mei_txe_pm_runtime_idle)
};

#define MEI_TXE_PM_OPS (&mei_txe_pm_ops)
#else
#define MEI_TXE_PM_OPS NULL
#endif /* CONFIG_PM */

/*
 *  PCI driver structure
 */

static struct pci_driver mei_txe_driver = {
 .name = KBUILD_MODNAME,
 .id_table = mei_txe_pci_tbl,
 .probe = mei_txe_probe,
 .remove = mei_txe_remove,
 .shutdown = mei_txe_shutdown,
 .driver.pm = MEI_TXE_PM_OPS,
};

module_pci_driver(mei_txe_driver);

MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface");
MODULE_LICENSE("GPL v2");

Messung V0.5 in Prozent
C=96 H=94 G=94

[Dauer der Verarbeitung: 0.16 Sekunden, vorverarbeitet 2026-06-07]