SSL tegra30-cardhu-a02.dts   Interaktion und
Portierbarkeitunbekannt

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;

#include "tegra30-cardhu.dtsi"

/* This dts file support the cardhu A02 version of board */

/ {
 model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
 compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";

 mmc@78000400 {
  status = "okay";
  power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
  bus-width = <4>;
  keep-power-in-suspend;
 };

 ddr_reg: regulator-ddr {
  compatible = "regulator-fixed";
  regulator-name = "vdd_ddr";
  regulator-min-microvolt = <1500000>;
  regulator-max-microvolt = <1500000>;
  regulator-always-on;
  regulator-boot-on;
  enable-active-high;
  gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 };

 sys_3v3_reg: regulator-3v3 {
  compatible = "regulator-fixed";
  regulator-name = "sys_3v3";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  enable-active-high;
  gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 };

 usb1_vbus_reg: regulator-usb1 {
  compatible = "regulator-fixed";
  regulator-name = "usb1_vbus";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  enable-active-high;
  gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
  gpio-open-drain;
  vin-supply = <&vdd_5v0_reg>;
 };

 usb3_vbus_reg: regulator-usb3 {
  compatible = "regulator-fixed";
  regulator-name = "usb3_vbus";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  enable-active-high;
  gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
  gpio-open-drain;
  vin-supply = <&vdd_5v0_reg>;
 };

 vdd_5v0_reg: regulator-5v0 {
  compatible = "regulator-fixed";
  regulator-name = "5v0";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  enable-active-high;
  gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 };

 vdd_bl_reg: regulator-bl {
  compatible = "regulator-fixed";
  regulator-name = "vdd_bl";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
  regulator-boot-on;
  enable-active-high;
  gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
 };
};