Quelle cdr031.cob Sprache: unbekannt

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR031.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "CDR031.SCO") calling SQL
      * procedures in file "CDR031.MCO".

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1994/10/26 STANDARD COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * CDR031.SCO
      * WRITTEN BY: David Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * This routine tests FIPS sizing.
      *
      * REFERENCES
      *   ANSI SQL-1992
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  vtr119 PIC  X(118).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM SUN.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, cdr031.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0526 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0526 "
             DISPLAY "FIPS sizing: Length of FOREIGN KEY column list =
      -    " 120"
             DISPLAY "References:"
             DISPLAY " FIPS 16.6 #.35 -- Sizing for database
      -    " constructs"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *This syntax is copied from dml044, if it worked there it should
                MOVE "This test is trying to test the limit on the total
      -       " length of a foreign key column list, which is supposed t
      -       "o be 120..." TO vtr119
             DISPLAY " vtr119 = ", vtr119

             DISPLAY "INSERT INTO SUN.T6118REF VALUES"
             DISPLAY " ('AAAAAAAAAAAAAAAAAAAA',
      -    " 'BBBBBBBBBBBBBBBBBBBB',"
             DISPLAY " 'CCCCCCCCCCCCCCCCCCCC',
      -    " 'DDDDDDDDDDDDDDDDDDDD',"
             DISPLAY " 'EEEEEEEEEEEEEEEEEEEEEEE', 9999, :vtr119);"
      *  EXEC SQL INSERT INTO SUN.T6118REF VALUES
      *    ('AAAAAAAAAAAAAAAAAAAA', 'BBBBBBBBBBBBBBBBBBBB',
      *    'CCCCCCCCCCCCCCCCCCCC', 'DDDDDDDDDDDDDDDDDDDD',
      *    'EEEEEEEEEEEEEEEEEEEEEEE', 9999, :vtr119);
             CALL "SUB2" USING SQLCODE SQLSTATE vtr119
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO SUN.T6 VALUES"
             DISPLAY " ('AAAAAAAAAAAAAAAAAAAA',
      -    " 'BBBBBBBBBBBBBBBBBBBB',"
             DISPLAY " 'CCCCCCCCCCCCCCCCCCCC',
      -    " 'DDDDDDDDDDDDDDDDDDDD',"
             DISPLAY " 'EEEEEEEEEEEEEEEEEEEEEEE', 9999);"
      *  EXEC SQL INSERT INTO SUN.T6 VALUES
      *    ('AAAAAAAAAAAAAAAAAAAA', 'BBBBBBBBBBBBBBBBBBBB',
      *    'CCCCCCCCCCCCCCCCCCCC', 'DDDDDDDDDDDDDDDDDDDD',
      *    'EEEEEEEEEEEEEEEEEEEEEEE', 9999);
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO SUN.T118 VALUES (:vtr119);"
      *  EXEC SQL INSERT INTO SUN.T118 VALUES (:vtr119);
             CALL "SUB4" USING SQLCODE SQLSTATE vtr119
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *The following should fail.

             DISPLAY "INSERT INTO SUN.T6 VALUES"
             DISPLAY " ('AAAAAAAAAAAAAAAAAAAA',
      -    " 'BBBBBBBBBBBBBBBBBBBB',"
             DISPLAY " 'CCCCCCCCCCCCCCCCCCCC',
      -    " 'DDDDDDDDDDDDDDDDDDDD',"
             DISPLAY " 'EEEEEEEEEEEEEEEEEEEEEEE', 0);"
      *  EXEC SQL INSERT INTO SUN.T6 VALUES
      *    ('AAAAAAAAAAAAAAAAAAAA', 'BBBBBBBBBBBBBBBBBBBB',
      *    'CCCCCCCCCCCCCCCCCCCC', 'DDDDDDDDDDDDDDDDDDDD',
      *    'EEEEEEEEEEEEEEEEEEEEEEE', 0);
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "23000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "23000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "INSERT INTO SUN.T118 VALUES ('Hamlet');"
      *  EXEC SQL INSERT INTO SUN.T118 VALUES ('Hamlet');
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "23000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "23000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (flag  =  1) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO SUN.TESTREPORT
      *      VALUES('0526','pass','MCO');
               CALL "SUB8" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " cdr031.sco *** fail *** "
      *    EXEC SQL INSERT INTO SUN.TESTREPORT
      *      VALUES('0526','fail','MCO');
               CALL "SUB9" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF
      *  EXEC SQL COMMIT WORK;
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "================================================"

      ******************** END TEST0526 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality100%

Quelle cdr031.cob Sprache: unbekannt

[ 0.6Quellennavigators Projekt ]