Quelle jdcolor.c Sprache: C

/*
* reserved comment block
* DO NOT REMOVE OR ALTER!
*/
/*
* jdcolor.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains output colorspace conversion routines.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"

/* Private subobject */

typedef struct {
  struct jpeg_color_deconverter pub; /* public fields */

  /* Private state for YCC->RGB conversion */
  int * Cr_r_tab;               /* => table for Cr to R conversion */
  int * Cb_b_tab;               /* => table for Cb to B conversion */
  INT32 * Cr_g_tab;             /* => table for Cr to G conversion */
  INT32 * Cb_g_tab;             /* => table for Cb to G conversion */
} my_color_deconverter;

typedef my_color_deconverter * my_cconvert_ptr;

/**************** YCbCr -> RGB conversion: most common case **************/

/*
* YCbCr is defined per CCIR 601-1, except that Cb and Cr are
* normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
* The conversion equations to be implemented are therefore
*      R = Y                + 1.40200 * Cr
*      G = Y - 0.34414 * Cb - 0.71414 * Cr
*      B = Y + 1.77200 * Cb
* where Cb and Cr represent the incoming values less CENTERJSAMPLE.
* (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
*
* To avoid floating-point arithmetic, we represent the fractional constants
* as integers scaled up by 2^16 (about 4 digits precision); we have to divide
* the products by 2^16, with appropriate rounding, to get the correct answer.
* Notice that Y, being an integral input, does not contribute any fraction
* so it need not participate in the rounding.
*
* For even more speed, we avoid doing any multiplications in the inner loop
* by precalculating the constants times Cb and Cr for all possible values.
* For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
* for 12-bit samples it is still acceptable.  It's not very reasonable for
* 16-bit samples, but if you want lossless storage you shouldn't be changing
* colorspace anyway.
* The Cr=>R and Cb=>B values can be rounded to integers in advance; the
* values for the G calculation are left scaled up, since we must add them
* together before rounding.
*/

#define SCALEBITS       16      /* speediest right-shift on some machines */
#define ONE_HALF        ((INT32) 1 << (SCALEBITS-1))
#define FIX(x)          ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))

/*
* Initialize tables for YCC->RGB colorspace conversion.
*/

LOCAL(void)
build_ycc_rgb_table (j_decompress_ptr cinfo)
{
  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
  int i;
  INT32 x;
  SHIFT_TEMPS

  cconvert->Cr_r_tab = (int *)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                                (MAXJSAMPLE+1) * SIZEOF(int));
  cconvert->Cb_b_tab = (int *)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                                (MAXJSAMPLE+1) * SIZEOF(int));
  cconvert->Cr_g_tab = (INT32 *)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                                (MAXJSAMPLE+1) * SIZEOF(INT32));
  cconvert->Cb_g_tab = (INT32 *)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                                (MAXJSAMPLE+1) * SIZEOF(INT32));

  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
    /* Cr=>R value is nearest int to 1.40200 * x */
    cconvert->Cr_r_tab[i] = (int)
                    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
    /* Cb=>B value is nearest int to 1.77200 * x */
    cconvert->Cb_b_tab[i] = (int)
                    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
    /* Cr=>G value is scaled-up -0.71414 * x */
    cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
    /* Cb=>G value is scaled-up -0.34414 * x */
    /* We also add in ONE_HALF so that need not do it in inner loop */
    cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
  }
}

/*
* Convert some rows of samples to the output colorspace.
*
* Note that we change from noninterleaved, one-plane-per-component format
* to interleaved-pixel format.  The output buffer is therefore three times
* as wide as the input buffer.
* A starting row offset is provided only for the input buffer.  The caller
* can easily adjust the passed output_buf value to accommodate any row
* offset required on that side.
*/

METHODDEF(void)
ycc_rgb_convert (j_decompress_ptr cinfo,
                 JSAMPIMAGE input_buf, JDIMENSION input_row,
                 JSAMPARRAY output_buf, int num_rows)
{
  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
  register int y, cb, cr;
  register JSAMPROW outptr;
  register JSAMPROW inptr0, inptr1, inptr2;
  register JDIMENSION col;
  JDIMENSION num_cols = cinfo->output_width;
  /* copy these pointers into registers if possible */
  register JSAMPLE * range_limit = cinfo->sample_range_limit;
  register int * Crrtab = cconvert->Cr_r_tab;
  register int * Cbbtab = cconvert->Cb_b_tab;
  register INT32 * Crgtab = cconvert->Cr_g_tab;
  register INT32 * Cbgtab = cconvert->Cb_g_tab;
  SHIFT_TEMPS

  while (--num_rows >= 0) {
    inptr0 = input_buf[0][input_row];
    inptr1 = input_buf[1][input_row];
    inptr2 = input_buf[2][input_row];
    input_row++;
    outptr = *output_buf++;
    for (col = 0; col < num_cols; col++) {
      y  = GETJSAMPLE(inptr0[col]);
      cb = GETJSAMPLE(inptr1[col]);
      cr = GETJSAMPLE(inptr2[col]);
      /* Range-limiting is essential due to noise introduced by DCT losses. */
      outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
      outptr[RGB_GREEN] = range_limit[y +
                              ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
                                                 SCALEBITS))];
      outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
      outptr += RGB_PIXELSIZE;
    }
  }
}

/**************** Cases other than YCbCr -> RGB **************/

/*
* Color conversion for no colorspace change: just copy the data,
* converting from separate-planes to interleaved representation.
*/

METHODDEF(void)
null_convert (j_decompress_ptr cinfo,
              JSAMPIMAGE input_buf, JDIMENSION input_row,
              JSAMPARRAY output_buf, int num_rows)
{
  register JSAMPROW inptr, outptr;
  register JDIMENSION count;
  register int num_components = cinfo->num_components;
  JDIMENSION num_cols = cinfo->output_width;
  int ci;

  while (--num_rows >= 0) {
    for (ci = 0; ci < num_components; ci++) {
      inptr = input_buf[ci][input_row];
      outptr = output_buf[0] + ci;
      for (count = num_cols; count > 0; count--) {
        *outptr = *inptr++;     /* needn't bother with GETJSAMPLE() here */
        outptr += num_components;
      }
    }
    input_row++;
    output_buf++;
  }
}

/*
* Color conversion for grayscale: just copy the data.
* This also works for YCbCr -> grayscale conversion, in which
* we just copy the Y (luminance) component and ignore chrominance.
*/

METHODDEF(void)
grayscale_convert (j_decompress_ptr cinfo,
                   JSAMPIMAGE input_buf, JDIMENSION input_row,
                   JSAMPARRAY output_buf, int num_rows)
{
  jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
                    num_rows, cinfo->output_width);
}

/*
* Convert grayscale to RGB: just duplicate the graylevel three times.
* This is provided to support applications that don't want to cope
* with grayscale as a separate case.
*/

METHODDEF(void)
gray_rgb_convert (j_decompress_ptr cinfo,
                  JSAMPIMAGE input_buf, JDIMENSION input_row,
                  JSAMPARRAY output_buf, int num_rows)
{
  register JSAMPROW inptr, outptr;
  register JDIMENSION col;
  JDIMENSION num_cols = cinfo->output_width;

  while (--num_rows >= 0) {
    inptr = input_buf[0][input_row++];
    outptr = *output_buf++;
    for (col = 0; col < num_cols; col++) {
      /* We can dispense with GETJSAMPLE() here */
      outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
      outptr += RGB_PIXELSIZE;
    }
  }
}

/*
* Adobe-style YCCK->CMYK conversion.
* We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
* conversion as above, while passing K (black) unchanged.
* We assume build_ycc_rgb_table has been called.
*/

METHODDEF(void)
ycck_cmyk_convert (j_decompress_ptr cinfo,
                   JSAMPIMAGE input_buf, JDIMENSION input_row,
                   JSAMPARRAY output_buf, int num_rows)
{
  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
  register int y, cb, cr;
  register JSAMPROW outptr;
  register JSAMPROW inptr0, inptr1, inptr2, inptr3;
  register JDIMENSION col;
  JDIMENSION num_cols = cinfo->output_width;
  /* copy these pointers into registers if possible */
  register JSAMPLE * range_limit = cinfo->sample_range_limit;
  register int * Crrtab = cconvert->Cr_r_tab;
  register int * Cbbtab = cconvert->Cb_b_tab;
  register INT32 * Crgtab = cconvert->Cr_g_tab;
  register INT32 * Cbgtab = cconvert->Cb_g_tab;
  SHIFT_TEMPS

  while (--num_rows >= 0) {
    inptr0 = input_buf[0][input_row];
    inptr1 = input_buf[1][input_row];
    inptr2 = input_buf[2][input_row];
    inptr3 = input_buf[3][input_row];
    input_row++;
    outptr = *output_buf++;
    for (col = 0; col < num_cols; col++) {
      y  = GETJSAMPLE(inptr0[col]);
      cb = GETJSAMPLE(inptr1[col]);
      cr = GETJSAMPLE(inptr2[col]);
      /* Range-limiting is essential due to noise introduced by DCT losses. */
      outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];   /* red */
      outptr[1] = range_limit[MAXJSAMPLE - (y +                 /* green */
                              ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
                                                 SCALEBITS)))];
      outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])];   /* blue */
      /* K passes through unchanged */
      outptr[3] = inptr3[col];  /* don't need GETJSAMPLE here */
      outptr += 4;
    }
  }
}

/*
* Empty method for start_pass.
*/

METHODDEF(void)
start_pass_dcolor (j_decompress_ptr cinfo)
{
  /* no work needed */
}

/*
* Module initialization routine for output colorspace conversion.
*/

GLOBAL(void)
jinit_color_deconverter (j_decompress_ptr cinfo)
{
  my_cconvert_ptr cconvert;
  int ci;

  cconvert = (my_cconvert_ptr)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                                SIZEOF(my_color_deconverter));
  cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
  cconvert->pub.start_pass = start_pass_dcolor;

  /* Make sure num_components agrees with jpeg_color_space */
  switch (cinfo->jpeg_color_space) {
  case JCS_GRAYSCALE:
    if (cinfo->num_components != 1)
      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
    break;
  case JCS_RGB:
  case JCS_YCbCr:
    if (cinfo->num_components != 3)
      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
    break;

  case JCS_CMYK:
  case JCS_YCCK:
    if (cinfo->num_components != 4)
      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
    break;

  default:                      /* JCS_UNKNOWN can be anything */
    if (cinfo->num_components < 1)
      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
    break;
  }

  /* Set out_color_components and conversion method based on requested space.
   * Also clear the component_needed flags for any unused components,
   * so that earlier pipeline stages can avoid useless computation.
   */

  switch (cinfo->out_color_space) {
  case JCS_GRAYSCALE:
    cinfo->out_color_components = 1;
    if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
        cinfo->jpeg_color_space == JCS_YCbCr) {
      cconvert->pub.color_convert = grayscale_convert;
      /* For color->grayscale conversion, only the Y (0) component is needed */
      for (ci = 1; ci < cinfo->num_components; ci++)
        cinfo->comp_info[ci].component_needed = FALSE;
    } else
      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
    break;

  case JCS_RGB:
    cinfo->out_color_components = RGB_PIXELSIZE;
    if (cinfo->jpeg_color_space == JCS_YCbCr) {
      cconvert->pub.color_convert = ycc_rgb_convert;
      build_ycc_rgb_table(cinfo);
    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
      cconvert->pub.color_convert = gray_rgb_convert;
    } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
      cconvert->pub.color_convert = null_convert;
    } else
      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
    break;

  case JCS_CMYK:
    cinfo->out_color_components = 4;
    if (cinfo->jpeg_color_space == JCS_YCCK) {
      cconvert->pub.color_convert = ycck_cmyk_convert;
      build_ycc_rgb_table(cinfo);
    } else if (cinfo->jpeg_color_space == JCS_CMYK) {
      cconvert->pub.color_convert = null_convert;
    } else
      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
    break;

  default:
    /* Permit null conversion to same output space */
    if (cinfo->out_color_space == cinfo->jpeg_color_space) {
      cinfo->out_color_components = cinfo->num_components;
      cconvert->pub.color_convert = null_convert;
    } else                      /* unsupported non-null conversion */
      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
    break;
  }

  if (cinfo->quantize_colors)
    cinfo->output_components = 1; /* single colormapped output component */
  else
    cinfo->output_components = cinfo->out_color_components;
}

quality91%

¤ Dauer der Verarbeitung: 0.3 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.