| Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/Cobol/Test-Suite/SQL M/ Datei vom 4.1.2008 mit Größe 15 kB |
|
Quelle dml004.cob Sprache: Cobol |
|||||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML004. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "DML004.SCO") calling SQL * procedures in file "DML004.MCO" **************************************************************** * * COMMENT SECTION * * DATE 1987/08/21 STANDARD COBOL LANGUAGE * NIST SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML004.SCO * WRITTEN BY: HU YANPING * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * THIS ROUTINE TESTS THE FETCH STATEMENT IN THE LANGUAGE OF * SQL. THE FORMAT: * FETCH <cursor name> INTO <fetch target list> * * REFERENCES * AMERICAN NATIONAL STANDARD database language - SQL * X3.135-1989 * * SECTION 8.1 <close statement> * SECTION 8.3 <declare cursor> * SECTION 8.6 <fetch statement> * SECTION 8.7 <insert statement> * SECTION 8.8 <open statement> * **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 EMPNO1 PIC X(3). 01 EMPNO2 PIC X(3). 01 PNAME1 PIC X(4). 01 HOURS1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 i PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE. 01 indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE. * EXEC SQL END DECLARE SECTION END-EXEC 01 uid PIC X(18). 01 uidx PIC X(18). 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQLCODE PIC S9(9) COMP. 01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE. 01 DISP1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE. 01 DISP2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE. * date_time declaration * 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). PROCEDURE DIVISION. P0. MOVE "HU" TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx CALL "AUTHCK" USING SQLCODE uidx MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User " uid " expected." DISPLAY "User " uidx " connected." DISPLAY " " STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, dml004.sco" DISPLAY " " DISPLAY "59-byte ID" DISPLAY "TEd Version #" DISPLAY " " * date_time print * ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0008 ******************* DISPLAY " TEST0008 " DISPLAY " FETCH < cursor name > INTO < fetch target list >" DISPLAY "reference X3.135-1989 section 8.6 General Rules 2)" DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY " *** FOR SELECT EMPNUM,HOURS " DISPLAY " *** FROM WORKS " DISPLAY " *** WHERE PNUM='P8' " DISPLAY " *** ORDER BY EMPNUM DESC " * EXEC SQL DECLARE X CURSOR * FOR SELECT EMPNUM,HOURS * FROM WORKS * WHERE PNUM='P8' * ORDER BY EMPNUM DESC END-EXEC * EXEC SQL OPEN X; CALL "SUB1" USING SQLCODE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH X INTO :EMPNO1,:HOURS1; CALL "SUB2" USING SQLCODE EMPNO1 HOURS1 MOVE SQLCODE TO SQL-COD DISPLAY " EMPNO1=", EMPNO1 " and HOURS1=", HOURS1 " " DISPLAY " SQLCODE=", SQL-COD " " DISPLAY "The answer should be SQLCODE = 100." if (SQLCODE = 100) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0008','pass','MCO') END-EXEC CALL "SUB3" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " dml004.sco *** fail *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0008','fail','MCO') END-EXEC ADD 1 TO errcnt CALL "SUB4" USING SQLCODE MOVE SQLCODE TO SQL-COD END-IF * EXEC SQL COMMIT WORK; CALL "SUB5" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "==================================================" DISPLAY " " ******************** END TEST0008 ******************* ******************** BEGIN TEST0009 ******************* DISPLAY " TEST0009 " DISPLAY " FETCH < cursor name > INTO < fetch target list >" DISPLAY "reference X3.135-1989 section 8.6 General Rules 8)" DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY " *** EXEC SQL INSERT INTO WORKS " DISPLAY " *** VALUES('E9','P9',NULL) " DISPLAY " *** EXEC SQL DECLARE Y CURSOR ...... " DISPLAY " *** EXEC SQL FETCH Y INTO :EMPNO1,:HOURS1:indic1 - " " * EXEC SQL INSERT INTO WORKS * VALUES('E9','P9',NULL) END-EXEC CALL "SUB6" USING SQLCODE MOVE SQLCODE TO SQL-COD * EXEC SQL SELECT EMPNUM * INTO :EMPNO1 * FROM WORKS * WHERE HOURS IS NULL END-EXEC CALL "SUB7" USING SQLCODE EMPNO1 MOVE SQLCODE TO SQL-COD DISPLAY " EMPNUM should be 'E9', EMPNUM = ", EMPNO1 " " * EXEC SQL DECLARE Y CURSOR * FOR SELECT EMPNUM,HOURS * FROM WORKS * WHERE PNUM='P9' * ORDER BY EMPNUM DESC END-EXEC * EXEC SQL OPEN Y; CALL "SUB8" USING SQLCODE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH Y INTO :EMPNO1,:HOURS1 :indic1; CALL "SUB9" USING SQLCODE EMPNO1 HOURS1 indic1 MOVE SQLCODE TO SQL-COD MOVE indic1 TO DISP1 DISPLAY " EMPNO1=", EMPNO1 " and HOURS1=", HOURS1 " " DISPLAY " indic1=", DISP1 " " * EXEC SQL ROLLBACK WORK; CALL "SUB10" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "The answer should be indic1 = -1." if (indic1 = -1 AND EMPNO1 = "E9") then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0009','pass','MCO') END-EXEC CALL "SUB11" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " dml004.sco *** fail *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0009','fail','MCO') END-EXEC ADD 1 TO errcnt CALL "SUB12" USING SQLCODE MOVE SQLCODE TO SQL-COD END-IF * EXEC SQL COMMIT WORK; CALL "SUB13" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "==================================================" DISPLAY " " ******************** END TEST0009 ******************* ******************** BEGIN TEST0161 ******************* DISPLAY " TEST0161 " DISPLAY " FETCH < cursor name > INTO < fetch target list >" DISPLAY "reference X3.135-1989 section 8.6 General Rules 8)" DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY " *** EXEC SQL INSERT INTO WORKS " DISPLAY " *** VALUES('E9','P9',NULL) " DISPLAY " *** EXEC SQL DECLARE YY CURSOR ...... " DISPLAY " *** EXEC SQL FETCH YY INTO :EMPNO1,:HOURS1 " * EXEC SQL INSERT INTO WORKS * VALUES('E9','P9',NULL) END-EXEC CALL "SUB14" USING SQLCODE MOVE SQLCODE TO SQL-COD * EXEC SQL SELECT EMPNUM * INTO :EMPNO1 * FROM WORKS * WHERE HOURS IS NULL END-EXEC CALL "SUB15" USING SQLCODE EMPNO1 MOVE SQLCODE TO SQL-COD DISPLAY " EMPNO1 should be 'E9', EMPNO1 = ", EMPNO1 " " * EXEC SQL DECLARE YY CURSOR * FOR SELECT EMPNUM,HOURS * FROM WORKS * WHERE PNUM='P9' * ORDER BY EMPNUM DESC END-EXEC * EXEC SQL OPEN YY; CALL "SUB16" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE "xxx" TO EMPNO2 MOVE -5 TO HOURS1 * EXEC SQL FETCH YY INTO :EMPNO2,:HOURS1; CALL "SUB17" USING SQLCODE EMPNO2 HOURS1 MOVE SQLCODE TO SQL-COD DISPLAY " EMPNO2=", EMPNO2 " and HOURS1=", HOURS1 " " DISPLAY " SQLCODE should be < 0, SQLCODE = ", SQL-COD MOVE SQLCODE TO i * EXEC SQL ROLLBACK WORK; CALL "SUB18" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "Fetch a null value without indicator should be - " wrong." if (i < 0 AND EMPNO1 = "E9") then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0161','pass','MCO') END-EXEC CALL "SUB19" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " dml004.sco *** fail *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0161','fail','MCO') END-EXEC ADD 1 TO errcnt CALL "SUB20" USING SQLCODE MOVE SQLCODE TO SQL-COD END-IF * EXEC SQL COMMIT WORK; CALL "SUB21" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "==================================================" DISPLAY " " ******************** END TEST0161 ******************* ******************** BEGIN TEST0162 ******************* DISPLAY " TEST0162 " DISPLAY " FETCH < cursor name > INTO < fetch target list >" DISPLAY " Cross ref. section 5.6 (INDICATOR) option " DISPLAY "reference X3.135-1989 section 8.6 General Rules 8)" DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY "*** EXEC SQL INSERT INTO WORKS " DISPLAY "*** VALUES('E9','P9',NULL) " DISPLAY "*** EXEC SQL DECLARE YYY CURSOR ...... " DISPLAY "*** EXEC SQL FETCH YYY INTO :EMPNO1,:HOURS1 - " INDICATOR :indic1" * EXEC SQL INSERT INTO WORKS * VALUES('E9','P9',NULL) END-EXEC CALL "SUB22" USING SQLCODE MOVE SQLCODE TO SQL-COD * EXEC SQL SELECT EMPNUM * INTO :EMPNO1 * FROM WORKS * WHERE HOURS IS NULL END-EXEC CALL "SUB23" USING SQLCODE EMPNO1 MOVE SQLCODE TO SQL-COD DISPLAY " EMPNUM should be 'E9', EMPNUM = ", EMPNO1 " " * EXEC SQL DECLARE YYY CURSOR * FOR SELECT EMPNUM,HOURS * FROM WORKS * WHERE PNUM='P9' * ORDER BY EMPNUM DESC END-EXEC * EXEC SQL OPEN YYY; CALL "SUB24" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE 0 TO HOURS1 MOVE 0 TO indic1 MOVE " " TO EMPNO1 * EXEC SQL FETCH YYY INTO :EMPNO1,:HOURS1 INDICATOR :indic1 * END-EXEC CALL "SUB25" USING SQLCODE EMPNO1 HOURS1 indic1 MOVE SQLCODE TO SQL-COD MOVE indic1 TO DISP1 DISPLAY " EMPNO1=", EMPNO1 " and HOURS1=", HOURS1 " " DISPLAY " indic1=", DISP1 " " * EXEC SQL ROLLBACK WORK; CALL "SUB26" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "The answer should be indic1 = -1." if (indic1 = -1 AND EMPNO1 = "E9") then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0162','pass','MCO') END-EXEC CALL "SUB27" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " dml004.sco *** fail *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0162','fail','MCO') END-EXEC ADD 1 TO errcnt CALL "SUB28" USING SQLCODE MOVE SQLCODE TO SQL-COD END-IF * EXEC SQL COMMIT WORK; CALL "SUB29" USING SQLCODE MOVE SQLCODE TO SQL-COD DISPLAY "==================================================" DISPLAY " " ******************** END TEST0162 ******************* ******************** BEGIN TEST0010 ******************* DISPLAY " TEST0010 " DISPLAY " FETCH < cursor name > INTO < fetch target list >" DISPLAY "reference X3.135-1989 section 8.6 General Rules 8)" DISPLAY " - - - - - - - - - - - - - - - - - - -" * EXEC SQL DECLARE Z CURSOR * FOR SELECT PNAME * FROM PROJ * WHERE PTYPE='Code' END-EXEC * EXEC SQL OPEN Z; CALL "SUB30" USING SQLCODE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH Z INTO :PNAME1:indic2; CALL "SUB31" USING SQLCODE PNAME1 indic2 MOVE SQLCODE TO SQL-COD MOVE indic2 TO DISP2 DISPLAY " PNAME1=", PNAME1 " " DISPLAY " indic2=", DISP2 " " DISPLAY "The answer should be indic2 = 20." if (indic2 = 20 AND PNAME1 = "CALM") then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0010','pass','MCO') END-EXEC CALL "SUB32" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " dml004.sco *** fail *** " * EXEC SQL INSERT INTO TESTREPORT * VALUES('0010','fail','MCO') END-EXEC ADD 1 TO errcnt CALL "SUB33" USING SQLCODE MOVE SQLCODE TO SQL-COD END-IF DISPLAY "==================================================" DISPLAY " " * EXEC SQL COMMIT WORK; CALL "SUB34" USING SQLCODE MOVE SQLCODE TO SQL-COD ******************** END TEST0010 ******************* **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements ¤ Dauer der Verarbeitung: 0.16 Sekunden (vorverarbeitet) ¤*© Formatika GbR, Deutschland |
|
2026-03-28