Quelle  dml139.cob   Sprache: unbekannt

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML139.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * Standard COBOL (file "DML139.SCO") calling SQL
      * procedures in file "DML139.MCO".


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1994/9/30 STANDARD COBOL LANGUAGE                           
      * NIST SQL VALIDATION TEST SUITE V6.0                          
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * DML139.SCO                                                    
      * WRITTEN BY:  David W. Flater                                 
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *                                                              
      * This routine tests <drop behavior> in non-dynamic SQL.  It   
      * is the non-dynamic version of DML140.                        
      *                                                              
      * REFERENCES                                                   
      *   FIPS PUB 127-2 14.1 Transitional SQL                       
      *   ANSI SQL-1992                                              
      *                                                              
      ****************************************************************



      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "HU " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, dml139.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0699 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0699 "
             DISPLAY " on a REVOKE (static)"
             DISPLAY "References:"
             DISPLAY " F# 3 -- Basic schema manipulation"
             DISPLAY " 11.2 FT.2 -- "
             DISPLAY " 11.37 -- "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *The following violates 11.37 SR.18. 
      *If it is rejected at compile time, save the error and TEd it ou
      *schema2 - AUTHORIZATION CUGINI - 
      *          grants SELECT ON HU.WORKS TO SULLIVAN 

             DISPLAY "REVOKE GRANT OPTION FOR SELECT"
             DISPLAY " ON HU.WORKS FROM CUGINI RESTRICT;"
      *  EXEC SQL REVOKE GRANT OPTION FOR SELECT
      *    ON HU.WORKS FROM CUGINI RESTRICT;
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "REVOKE GRANT OPTION FOR SELECT"
             DISPLAY " ON HU.WORKS FROM CUGINI CASCADE;"
      *  EXEC SQL REVOKE GRANT OPTION FOR SELECT
      *    ON HU.WORKS FROM CUGINI CASCADE;
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *schema1  GRANT SELECT ON HU.WORKS TO CUGINI is not affected by 
      *        REVOKE SELECT ON HU.WORKS FROM PUBLIC

             DISPLAY "REVOKE SELECT ON HU.WORKS"
             DISPLAY " FROM PUBLIC RESTRICT;"
      *  EXEC SQL REVOKE SELECT ON HU.WORKS
      *    FROM PUBLIC RESTRICT;
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *The following violates 11.37 SR.18. 
      *If it is rejected at compile time, save the error and TEd it ou
      *schema4 - AUTHORIZATION SULLIVAN1 
      *        - creates view MUL_SCH with SELECT from HU.STAFF 

             DISPLAY "REVOKE SELECT ON HU.STAFF"
             DISPLAY " FROM PUBLIC RESTRICT;"
      *  EXEC SQL REVOKE SELECT ON HU.STAFF
      *    FROM PUBLIC RESTRICT;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "REVOKE SELECT ON HU.PROJ"
             DISPLAY " FROM PUBLIC RESTRICT;"
      *  EXEC SQL REVOKE SELECT ON HU.PROJ
      *    FROM PUBLIC RESTRICT;
             CALL "SUB11" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB12" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0699','pass','MCO');
               CALL "SUB13" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml139.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0699','fail','MCO');
               CALL "SUB14" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB15" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0699 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.