#ifndef MY_BYTEORDER_INCLUDED
#define MY_BYTEORDER_INCLUDED
/* Copyright (c) 2001, 2012, Oracle and/or its affiliates. All rights reserved.
This program is free software ; you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation ; version 2 of the License .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program ; if not , write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335 USA */
#include <string.h>
/*
Byte - swap helpers .
*/
#ifdef _MSC_VER
# include <stdlib.h> /* _byteswap_* */
# define MY_BSWAP16(x) _byteswap_ushort(x)
# define MY_BSWAP32(x) _byteswap_ulong(x)
# define MY_BSWAP64(x) _byteswap_uint64(x)
#elif defined __GNUC__
# define MY_BSWAP16(x) __builtin_bswap16(x)
# define MY_BSWAP32(x) __builtin_bswap32(x)
# define MY_BSWAP64(x) __builtin_bswap64(x)
#else
# error provide byteswap intrinsics
#endif
/*
Some inline functions to convert between little - endian and host byte order
in the spirit of htons / htonl et al .
*/
static inline uint16 my_letoh16(uint16 x)
{
#ifdef WORDS_BIGENDIAN
return MY_BSWAP16(x);
#else
return x;
#endif
}
static inline uint16 my_betoh16(uint16 x)
{
#ifdef WORDS_BIGENDIAN
return x;
#else
return MY_BSWAP16(x);
#endif
}
static inline uint32 my_letoh32(uint32 x)
{
#ifdef WORDS_BIGENDIAN
return MY_BSWAP32(x);
#else
return x;
#endif
}
static inline uint32 my_betoh32(uint32 x)
{
#ifdef WORDS_BIGENDIAN
return x;
#else
return MY_BSWAP32(x);
#endif
}
static inline uint64 my_letoh64(uint64 x)
{
#ifdef WORDS_BIGENDIAN
return MY_BSWAP64(x);
#else
return x;
#endif
}
static inline uint64 my_betoh64(uint64 x)
{
#ifdef WORDS_BIGENDIAN
return x;
#else
return MY_BSWAP64(x);
#endif
}
#define my_htole16(x) my_letoh16(x)
#define my_htobe16(x) my_betoh16(x)
#define my_htole32(x) my_letoh32(x)
#define my_htobe32(x) my_betoh32(x)
#define my_htole64(x) my_letoh64(x)
#define my_htobe64(x) my_betoh64(x)
/*
Inline functions for reading / storing little endian integers from / to
potentially unaligned memory .
memcpy ( ) is used to avoid unaligned access . On most platforms the compiler
will optimize memcpy to a single instruction .
*/
static inline uint16 uint2korr(const void *p)
{
uint16 ret;
memcpy(&ret, p, 2 );
return my_letoh16(ret);
}
static inline uint32 uint4korr(const void *p)
{
uint32 ret;
memcpy(&ret, p, 4 );
return my_letoh32(ret);
}
static inline uint64 uint8korr(const void *p)
{
uint64 ret;
memcpy(&ret, p, 8 );
return my_letoh64(ret);
}
static inline int16 sint2korr(const void *p)
{
return (int16) uint2korr(p);
}
static inline int32 sint4korr(const void *p)
{
return (int32) uint4korr(p);
}
static inline longlong sint8korr(const void *p)
{
return (longlong) uint8korr(p);
}
static inline void int2store(void *t, ulonglong a)
{
uint16 v= my_htole16((uint16) a);
memcpy(t, &v, 2 );
}
static inline void int4store(void *t, ulonglong a)
{
uint32 v= my_htole32((uint32) a);
memcpy(t, &v, 4 );
}
static inline void int8store(void *t, ulonglong a)
{
uint64 v= my_htole64((uint64) a);
memcpy(t, &v, 8 );
}
/*
Odd - width and sign - extending functions . These use only individual
byte accesses or delegate to the even - width functions above , so they
are correct on any host endianness without further # ifdefs .
*/
static inline uint32 uint3korr(const void *p)
{
return (uint32) uint2korr(p) | ((uint32) ((const uchar *) p)[2 ] << 16 );
}
static inline int32 sint3korr(const void *p)
{
uint32 v = uint3korr(p);
/*
Shift left to move sign bit into MSB position , then arithmetic
right shift to sign - extend back .
*/
return ((int32)(v << 8 )) >> 8 ;
}
static inline ulonglong uint5korr(const void *p)
{
return (ulonglong) uint4korr(p) | ((ulonglong) ((const uchar *) p)[4 ] << 32 );
}
static inline ulonglong uint6korr(const void *p)
{
return (ulonglong) uint4korr(p) |
((ulonglong) uint2korr((const uchar *) p + 4 ) << 32 );
}
static inline void int3store(void *t, ulonglong a)
{
uchar *p= (uchar *) t;
int2store(t, a);
p[2 ]= (uchar) (a >> 16 );
}
static inline void int5store(void *t, ulonglong a)
{
uchar *p= (uchar *) t;
int4store(t, a);
p[4 ]= (uchar) (a >> 32 );
}
static inline void int6store(void *t, ulonglong a)
{
uchar *p= (uchar *) t;
int4store(t, a);
int2store(p + 4 , a >> 32 );
}
/*
mi_uint * korr : read an N - byte unsigned integer stored in big - endian
order , as used by MyISAM .
Below are optimizations for little - endian architectures .
*/
#ifndef WORDS_BIGENDIAN
#define HAVE_mi_uint5korr
#define HAVE_mi_uint6korr
#define HAVE_mi_uint7korr
#define HAVE_mi_uint8korr
static inline ulonglong mi_uint5korr(const void *p)
{
uint32 lo;
memcpy(&lo, (const uchar *) p + 1 , 4 );
lo= MY_BSWAP32(lo);
return ((ulonglong) ((const uchar *)p)[0 ]) << 32 | lo;
}
static inline ulonglong mi_uint6korr(const void *p)
{
uint32 a;
uint16 b;
ulonglong v;
memcpy(&a, p, 4 );
memcpy(&b, (const uchar *) p + 4 , 2 );
v= ((ulonglong) a | ((ulonglong) b << 32 )) << 16 ;
return MY_BSWAP64(v);
}
static inline ulonglong mi_uint7korr(const void *p)
{
uint32 a;
uint16 b;
ulonglong v;
ulonglong c= ((const uchar *)p)[6 ];
memcpy(&a, p, 4 );
memcpy(&b, (const uchar *) p + 4 , 2 );
v= ((ulonglong)a | ((ulonglong)b << 32 ) | (c << 48 )) << 8 ;
return MY_BSWAP64(v);
}
static inline ulonglong mi_uint8korr(const void *p)
{
ulonglong ret;
memcpy(&ret, p, 8 );
return MY_BSWAP64(ret);
}
#endif /* !WORDS_BIGENDIAN */
/*
Read a 32 - bit integer from network byte order ( big - endian )
from an unaligned memory location .
*/
static inline int32 int4net(const void *p)
{
int32 ret;
memcpy(&ret, p, 4 );
return (int32)my_betoh32(ret);
}
/*
Some macros for reading doubles and floats ( clean , do not assume alignment )
These are defined in big_endian . h and little_endian . h
*/
#ifdef WORDS_BIGENDIAN
#include "big_endian.h"
#else
#include "little_endian.h"
#endif
/* convenience helpers */
static inline float get_float(const void *from)
{
float to;
float4get(to, ((const uchar*)from));
return to;
}
#endif /* MY_BYTEORDER_INCLUDED */
Messung V0.5 in Prozent C=96 H=100 G=97
¤ Dauer der Verarbeitung: 0.29 Sekunden
(vorverarbeitet am 2026-10-08)
¤
*© Formatika GbR, Deutschland