/* SPDX-License-Identifier: MIT */
/******************************************************************************
* ring . h
*
* Shared producer - consumer ring macros .
*
* Tim Deegan and Andrew Warfield November 2004 .
*/
#ifndef __XEN_PUBLIC_IO_RING_H__
#define __XEN_PUBLIC_IO_RING_H__
/*
* When # include ' ing this header , you need to provide the following
* declaration upfront :
* - standard integers types ( uint8_t , uint16_t , etc )
* They are provided by stdint . h of the standard headers .
*
* In addition , if you intend to use the FLEX macros , you also need to
* provide the following , before invoking the FLEX macros :
* - size_t
* - memcpy
* - grant_ref_t
* These declarations are provided by string . h of the standard headers ,
* and grant_table . h from the Xen public headers .
*/
#include <xen/interface/grant_table.h>
typedef unsigned int RING_IDX;
/* Round a 32-bit unsigned constant down to the nearest power of two. */
#define __RD2(_x) (((_x) & 0 x00000002) ? 0 x2 : ((_x) & 0 x1))
#define __RD4(_x) (((_x) & 0 x0000000c) ? __RD2((_x)>>2 )<<2 : __RD2(_x))
#define __RD8(_x) (((_x) & 0 x000000f0) ? __RD4((_x)>>4 )<<4 : __RD4(_x))
#define __RD16(_x) (((_x) & 0 x0000ff00) ? __RD8((_x)>>8 )<<8 : __RD8(_x))
#define __RD32(_x) (((_x) & 0 xffff0000) ? __RD16((_x)>>16 )<<16 : __RD16(_x))
/*
* Calculate size of a shared ring , given the total available space for the
* ring and indexes ( _ sz ) , and the name tag of the request / response structure .
* A ring contains as many entries as will fit , rounded down to the nearest
* power of two ( so we can mask with ( size - 1 ) to loop around ) .
*/
#define __CONST_RING_SIZE(_s, _sz) \
(__RD32(((_sz) - offsetof(struct _s## _sring, ring)) / \
sizeof (((struct _s## _sring *)0 )->ring[0 ])))
/*
* The same for passing in an actual pointer instead of a name tag .
*/
#define __RING_SIZE(_s, _sz) \
(__RD32(((_sz) - (long )(_s)->ring + (long )(_s)) / sizeof ((_s)->ring[0 ])))
/*
* Macros to make the correct C datatypes for a new kind of ring .
*
* To make a new ring datatype , you need to have two message structures ,
* let ' s say request_t , and response_t already defined .
*
* In a header where you want the ring datatype declared , you then do :
*
* DEFINE_RING_TYPES ( mytag , request_t , response_t ) ;
*
* These expand out to give you a set of types , as you can see below .
* The most important of these are :
*
* mytag_sring_t - The shared ring .
* mytag_front_ring_t - The ' front ' half of the ring .
* mytag_back_ring_t - The ' back ' half of the ring .
*
* To initialize a ring in your code you need to know the location and size
* of the shared memory area ( PAGE_SIZE , for instance ) . To initialise
* the front half :
*
* mytag_front_ring_t ring ;
* XEN_FRONT_RING_INIT ( & ring , ( mytag_sring_t * ) shared_page , PAGE_SIZE ) ;
*
* Initializing the back follows similarly ( note that only the front
* initializes the shared ring ) :
*
* mytag_back_ring_t back_ring ;
* BACK_RING_INIT ( & back_ring , ( mytag_sring_t * ) shared_page , PAGE_SIZE ) ;
*/
#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \
\
/* Shared ring entry */ \
union __name## _sring_entry { \
__req_t req; \
__rsp_t rsp; \
}; \
\
/* Shared ring page */ \
struct __name## _sring { \
RING_IDX req_prod, req_event; \
RING_IDX rsp_prod, rsp_event; \
uint8_t __pad[48 ]; \
union __name## _sring_entry ring[]; \
}; \
\
/* "Front" end's private variables */ \
struct __name## _front_ring { \
RING_IDX req_prod_pvt; \
RING_IDX rsp_cons; \
unsigned int nr_ents; \
struct __name## _sring *sring; \
}; \
\
/* "Back" end's private variables */ \
struct __name## _back_ring { \
RING_IDX rsp_prod_pvt; \
RING_IDX req_cons; \
unsigned int nr_ents; \
struct __name## _sring *sring; \
}; \
\
/*
* Macros for manipulating rings .
*
* FRONT_RING_whatever works on the " front end " of a ring : here
* requests are pushed on to the ring and responses taken off it .
*
* BACK_RING_whatever works on the " back end " of a ring : here
* requests are taken off the ring and responses put on .
*
* N . B . these macros do NO INTERLOCKS OR FLOW CONTROL .
* This is OK in 1 - for - 1 request - response situations where the
* requestor ( front end ) never has more than RING_SIZE ( ) - 1
* outstanding requests .
*/
/* Initialising empty rings */
#define SHARED_RING_INIT(_s) do { \
(_s)->req_prod = (_s)->rsp_prod = 0 ; \
(_s)->req_event = (_s)->rsp_event = 1 ; \
(void )memset((_s)->__pad, 0 , sizeof ((_s)->__pad)); \
} while (0 )
#define FRONT_RING_ATTACH(_r, _s, _i, __size) do { \
(_r)->req_prod_pvt = (_i); \
(_r)->rsp_cons = (_i); \
(_r)->nr_ents = __RING_SIZE(_s, __size); \
(_r)->sring = (_s); \
} while (0 )
#define FRONT_RING_INIT(_r, _s, __size) FRONT_RING_ATTACH(_r, _s, 0 , __size)
#define XEN_FRONT_RING_INIT(r, s, size) do { \
SHARED_RING_INIT(s); \
FRONT_RING_INIT(r, s, size); \
} while (0 )
#define BACK_RING_ATTACH(_r, _s, _i, __size) do { \
(_r)->rsp_prod_pvt = (_i); \
(_r)->req_cons = (_i); \
(_r)->nr_ents = __RING_SIZE(_s, __size); \
(_r)->sring = (_s); \
} while (0 )
#define BACK_RING_INIT(_r, _s, __size) BACK_RING_ATTACH(_r, _s, 0 , __size)
/* How big is this ring? */
#define RING_SIZE(_r) \
((_r)->nr_ents)
/* Number of free requests (for use on front side only). */
#define RING_FREE_REQUESTS(_r) \
(RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
/* Test if there is an empty slot available on the front ring.
* ( This is only meaningful from the front . )
*/
#define RING_FULL(_r) \
(RING_FREE_REQUESTS(_r) == 0 )
/* Test if there are outstanding messages to be processed on a ring. */
#define XEN_RING_NR_UNCONSUMED_RESPONSES(_r) \
((_r)->sring->rsp_prod - (_r)->rsp_cons)
#define XEN_RING_NR_UNCONSUMED_REQUESTS(_r) ({ \
unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \
unsigned int rsp = RING_SIZE(_r) - \
((_r)->req_cons - (_r)->rsp_prod_pvt); \
req < rsp ? req : rsp; \
})
#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
(!!XEN_RING_NR_UNCONSUMED_RESPONSES(_r))
#define RING_HAS_UNCONSUMED_REQUESTS(_r) \
(!!XEN_RING_NR_UNCONSUMED_REQUESTS(_r))
/* Direct access to individual ring elements, by index. */
#define RING_GET_REQUEST(_r, _idx) \
(&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1 ))].req))
#define RING_GET_RESPONSE(_r, _idx) \
(&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1 ))].rsp))
/*
* Get a local copy of a request / response .
*
* Use this in preference to RING_GET_ { REQUEST , RESPONSE } ( ) so all processing is
* done on a local copy that cannot be modified by the other end .
*
* Note that https : //gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
* to be ineffective where dest is a struct which consists of only bitfields .
*/
#define RING_COPY_(type, r, idx, dest) do { \
/* Use volatile to force the copy into dest. */ \
*(dest) = *(volatile typeof(dest))RING_GET_## type(r, idx); \
} while (0 )
#define RING_COPY_REQUEST(r, idx, req) RING_COPY_(REQUEST, r, idx, req)
#define RING_COPY_RESPONSE(r, idx, rsp) RING_COPY_(RESPONSE, r, idx, rsp)
/* Loop termination condition: Would the specified index overflow the ring? */
#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \
(((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
/* Ill-behaved frontend determination: Can there be this many requests? */
#define RING_REQUEST_PROD_OVERFLOW(_r, _prod) \
(((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
/* Ill-behaved backend determination: Can there be this many responses? */
#define RING_RESPONSE_PROD_OVERFLOW(_r, _prod) \
(((_prod) - (_r)->rsp_cons) > RING_SIZE(_r))
#define RING_PUSH_REQUESTS(_r) do { \
virt_wmb(); /* back sees requests /before/ updated producer index */\
(_r)->sring->req_prod = (_r)->req_prod_pvt; \
} while (0 )
#define RING_PUSH_RESPONSES(_r) do { \
virt_wmb(); /* front sees resps /before/ updated producer index */ \
(_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \
} while (0 )
/*
* Notification hold - off ( req_event and rsp_event ) :
*
* When queueing requests or responses on a shared ring , it may not always be
* necessary to notify the remote end . For example , if requests are in flight
* in a backend , the front may be able to queue further requests without
* notifying the back ( if the back checks for new requests when it queues
* responses ) .
*
* When enqueuing requests or responses :
*
* Use RING_PUSH_ { REQUESTS , RESPONSES } _ AND_CHECK_NOTIFY ( ) . The second argument
* is a boolean return value . True indicates that the receiver requires an
* asynchronous notification .
*
* After dequeuing requests or responses ( before sleeping the connection ) :
*
* Use RING_FINAL_CHECK_FOR_REQUESTS ( ) or RING_FINAL_CHECK_FOR_RESPONSES ( ) .
* The second argument is a boolean return value . True indicates that there
* are pending messages on the ring ( i . e . , the connection should not be put
* to sleep ) .
*
* These macros will set the req_event / rsp_event field to trigger a
* notification on the very next message that is enqueued . If you want to
* create batches of work ( i . e . , only receive a notification after several
* messages have been enqueued ) then you will need to create a customised
* version of the FINAL_CHECK macro in your own code , which sets the event
* field appropriately .
*/
#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \
RING_IDX __old = (_r)->sring->req_prod; \
RING_IDX __new = (_r)->req_prod_pvt; \
virt_wmb(); /* back sees requests /before/ updated producer index */\
(_r)->sring->req_prod = __new ; \
virt_mb(); /* back sees new requests /before/ we check req_event */ \
(_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \
(RING_IDX)(__new - __old)); \
} while (0 )
#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \
RING_IDX __old = (_r)->sring->rsp_prod; \
RING_IDX __new = (_r)->rsp_prod_pvt; \
virt_wmb(); /* front sees resps /before/ updated producer index */ \
(_r)->sring->rsp_prod = __new ; \
virt_mb(); /* front sees new resps /before/ we check rsp_event */ \
(_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \
(RING_IDX)(__new - __old)); \
} while (0 )
#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \
(_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
if (_work_to_do) break ; \
(_r)->sring->req_event = (_r)->req_cons + 1 ; \
virt_mb(); \
(_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
} while (0 )
#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \
(_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
if (_work_to_do) break ; \
(_r)->sring->rsp_event = (_r)->rsp_cons + 1 ; \
virt_mb(); \
(_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
} while (0 )
/*
* DEFINE_XEN_FLEX_RING_AND_INTF defines two monodirectional rings and
* functions to check if there is data on the ring , and to read and
* write to them .
*
* DEFINE_XEN_FLEX_RING is similar to DEFINE_XEN_FLEX_RING_AND_INTF , but
* does not define the indexes page . As different protocols can have
* extensions to the basic format , this macro allow them to define their
* own struct .
*
* XEN_FLEX_RING_SIZE
* Convenience macro to calculate the size of one of the two rings
* from the overall order .
*
* $ NAME_mask
* Function to apply the size mask to an index , to reduce the index
* within the range [ 0 - size ] .
*
* $ NAME_read_packet
* Function to read data from the ring . The amount of data to read is
* specified by the " size " argument .
*
* $ NAME_write_packet
* Function to write data to the ring . The amount of data to write is
* specified by the " size " argument .
*
* $ NAME_get_ring_ptr
* Convenience function that returns a pointer to read / write to the
* ring at the right location .
*
* $ NAME_data_intf
* Indexes page , shared between frontend and backend . It also
* contains the array of grant refs .
*
* $ NAME_queued
* Function to calculate how many bytes are currently on the ring ,
* ready to be read . It can also be used to calculate how much free
* space is currently on the ring ( XEN_FLEX_RING_SIZE ( ) -
* $ NAME_queued ( ) ) .
*/
#ifndef XEN_PAGE_SHIFT
/* The PAGE_SIZE for ring protocols and hypercall interfaces is always
* 4 K , regardless of the architecture , and page granularity chosen by
* operating systems .
*/
#define XEN_PAGE_SHIFT 12
#endif
#define XEN_FLEX_RING_SIZE(order) \
(1 UL << ((order) + XEN_PAGE_SHIFT - 1 ))
#define DEFINE_XEN_FLEX_RING(name) \
static inline RING_IDX name## _mask(RING_IDX idx, RING_IDX ring_size) \
{ \
return idx & (ring_size - 1 ); \
} \
\
static inline unsigned char *name## _get_ring_ptr(unsigned char *buf, \
RING_IDX idx, \
RING_IDX ring_size) \
{ \
return buf + name## _mask(idx, ring_size); \
} \
\
static inline void name## _read_packet(void *opaque, \
const unsigned char *buf, \
size_t size, \
RING_IDX masked_prod, \
RING_IDX *masked_cons, \
RING_IDX ring_size) \
{ \
if (*masked_cons < masked_prod || \
size <= ring_size - *masked_cons) { \
memcpy(opaque, buf + *masked_cons, size); \
} else { \
memcpy(opaque, buf + *masked_cons, ring_size - *masked_cons); \
memcpy((unsigned char *)opaque + ring_size - *masked_cons, buf, \
size - (ring_size - *masked_cons)); \
} \
*masked_cons = name## _mask(*masked_cons + size, ring_size); \
} \
\
static inline void name## _write_packet(unsigned char *buf, \
const void *opaque, \
size_t size, \
RING_IDX *masked_prod, \
RING_IDX masked_cons, \
RING_IDX ring_size) \
{ \
if (*masked_prod < masked_cons || \
size <= ring_size - *masked_prod) { \
memcpy(buf + *masked_prod, opaque, size); \
} else { \
memcpy(buf + *masked_prod, opaque, ring_size - *masked_prod); \
memcpy(buf, (unsigned char *)opaque + (ring_size - *masked_prod), \
size - (ring_size - *masked_prod)); \
} \
*masked_prod = name## _mask(*masked_prod + size, ring_size); \
} \
\
static inline RING_IDX name## _queued(RING_IDX prod, \
RING_IDX cons, \
RING_IDX ring_size) \
{ \
RING_IDX size; \
\
if (prod == cons) \
return 0 ; \
\
prod = name## _mask(prod, ring_size); \
cons = name## _mask(cons, ring_size); \
\
if (prod == cons) \
return ring_size; \
\
if (prod > cons) \
size = prod - cons; \
else \
size = ring_size - (cons - prod); \
return size; \
} \
\
struct name## _data { \
unsigned char *in; /* half of the allocation */ \
unsigned char *out; /* half of the allocation */ \
}
#define DEFINE_XEN_FLEX_RING_AND_INTF(name) \
struct name## _data_intf { \
RING_IDX in_cons, in_prod; \
\
uint8_t pad1[56 ]; \
\
RING_IDX out_cons, out_prod; \
\
uint8_t pad2[56 ]; \
\
RING_IDX ring_order; \
grant_ref_t ref[]; \
}; \
DEFINE_XEN_FLEX_RING(name)
#endif /* __XEN_PUBLIC_IO_RING_H__ */
Messung V0.5 in Prozent C=90 H=60 G=76
¤ Dauer der Verarbeitung: 0.18 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland