// SPDX-License-Identifier: GPL-2.0+
/*
* u_ether . c - - Ethernet - over - USB link layer utilities for Gadget stack
*
* Copyright ( C ) 2003 - 2005 , 2008 David Brownell
* Copyright ( C ) 2003 - 2004 Robert Schwebel , Benedikt Spranger
* Copyright ( C ) 2008 Nokia Corporation
*/
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/ctype.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/string_helpers.h>
#include <linux/usb/composite.h>
#include "u_ether.h"
/*
* This component encapsulates the Ethernet link glue needed to provide
* one ( ! ) network link through the USB gadget stack , normally " usb0 " .
*
* The control and data models are handled by the function driver which
* connects to this code ; such as CDC Ethernet ( ECM or EEM ) ,
* " CDC Subset " , or RNDIS . That includes all descriptor and endpoint
* management .
*
* Link level addressing is handled by this component using module
* parameters ; if no such parameters are provided , random link level
* addresses are used . Each end of the link uses one address . The
* host end address is exported in various ways , and is often recorded
* in configuration databases .
*
* The driver which assembles each configuration using such a link is
* responsible for ensuring that each configuration includes at most one
* instance of is network link . ( The network layer provides ways for
* this single " physical " link to be used by multiple virtual links . )
*/
#define UETH__VERSION "29-May-2008"
/* Experiments show that both Linux and Windows hosts allow up to 16k
* frame sizes . Set the max MTU size to 15 k + 52 to prevent allocating 32 k
* blocks and still have efficient handling. */
#define GETHER_MAX_MTU_SIZE 15412
#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN)
struct eth_dev {
/* lock is held while accessing port_usb
*/
spinlock_t lock;
struct gether *port_usb;
struct net_device *net;
struct usb_gadget *gadget;
spinlock_t req_lock; /* guard {rx,tx}_reqs */
struct list_head tx_reqs, rx_reqs;
atomic_t tx_qlen;
struct sk_buff_head rx_frames;
unsigned qmult;
unsigned header_len;
struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb);
int (*unwrap)(struct gether *,
struct sk_buff *skb,
struct sk_buff_head *list);
struct work_struct work;
unsigned long todo;
#define WORK_RX_MEMORY 0
bool zlp;
bool no_skb_reserve;
bool ifname_set;
u8 host_mac[ETH_ALEN];
u8 dev_mac[ETH_ALEN];
};
/*-------------------------------------------------------------------------*/
#define RX_EXTRA 20 /* bytes guarding against rx overflows */
#define DEFAULT_QLEN 2 /* double buffering by default */
/* use deeper queues at high/super speed */
static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
{
if (gadget->speed == USB_SPEED_HIGH || gadget->speed >= USB_SPEED_SUPER)
return qmult * DEFAULT_QLEN;
else
return DEFAULT_QLEN;
}
/*-------------------------------------------------------------------------*/
/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
{
struct eth_dev *dev = netdev_priv(net);
strscpy(p->driver, "g_ether" , sizeof (p->driver));
strscpy(p->version, UETH__VERSION, sizeof (p->version));
strscpy(p->fw_version, dev->gadget->name, sizeof (p->fw_version));
strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof (p->bus_info));
}
/* REVISIT can also support:
* - WOL ( by tracking suspends and issuing remote wakeup )
* - msglevel ( implies updated messaging )
* - . . . probably more ethtool ops
*/
static const struct ethtool_ops ops = {
.get_drvinfo = eth_get_drvinfo,
.get_link = ethtool_op_get_link,
};
static void defer_kevent(struct eth_dev *dev, int flag)
{
if (test_and_set_bit(flag, &dev->todo))
return ;
if (!schedule_work(&dev->work))
ERROR(dev, "kevent %d may have been dropped\n" , flag);
else
DBG(dev, "kevent %d scheduled\n" , flag);
}
static void rx_complete(struct usb_ep *ep, struct usb_request *req);
static int
rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
{
struct usb_gadget *g = dev->gadget;
struct sk_buff *skb;
int retval = -ENOMEM;
size_t size = 0 ;
struct usb_ep *out;
unsigned long flags;
spin_lock_irqsave(&dev->lock, flags);
if (dev->port_usb)
out = dev->port_usb->out_ep;
else
out = NULL;
if (!out)
{
spin_unlock_irqrestore(&dev->lock, flags);
return -ENOTCONN;
}
/* Padding up to RX_EXTRA handles minor disagreements with host.
* Normally we use the USB " terminate on short read " convention ;
* so allow up to ( N * maxpacket ) , since that memory is normally
* already allocated . Some hardware doesn ' t deal well with short
* reads ( e . g . DMA must be N * maxpacket ) , so for now don ' t trim a
* byte off the end ( to force hardware errors on overflow ) .
*
* RNDIS uses internal framing , and explicitly allows senders to
* pad to end - of - packet . That ' s potentially nice for speed , but
* means receivers can ' t recover lost synch on their own ( because
* new packets don ' t only start after a short RX ) .
*/
size += sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA;
size += dev->port_usb->header_len;
if (g->quirk_ep_out_aligned_size) {
size += out->maxpacket - 1 ;
size -= size % out->maxpacket;
}
if (dev->port_usb->is_fixed)
size = max_t(size_t, size, dev->port_usb->fixed_out_len);
spin_unlock_irqrestore(&dev->lock, flags);
skb = __netdev_alloc_skb(dev->net, size + NET_IP_ALIGN, gfp_flags);
if (skb == NULL) {
DBG(dev, "no rx skb\n" );
goto enomem;
}
/* Some platforms perform better when IP packets are aligned,
* but on at least one , checksumming fails otherwise . Note :
* RNDIS headers involve variable numbers of LE32 values .
*/
if (likely(!dev->no_skb_reserve))
skb_reserve(skb, NET_IP_ALIGN);
req->buf = skb->data;
req->length = size;
req->complete = rx_complete;
req->context = skb;
retval = usb_ep_queue(out, req, gfp_flags);
if (retval == -ENOMEM)
enomem:
defer_kevent(dev, WORK_RX_MEMORY);
if (retval) {
DBG(dev, "rx submit --> %d\n" , retval);
if (skb)
dev_kfree_skb_any(skb);
spin_lock_irqsave(&dev->req_lock, flags);
list_add(&req->list, &dev->rx_reqs);
spin_unlock_irqrestore(&dev->req_lock, flags);
}
return retval;
}
static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
struct sk_buff *skb = req->context, *skb2;
struct eth_dev *dev = ep->driver_data;
int status = req->status;
switch (status) {
/* normal completion */
case 0 :
skb_put(skb, req->actual);
if (dev->unwrap) {
unsigned long flags;
spin_lock_irqsave(&dev->lock, flags);
if (dev->port_usb) {
status = dev->unwrap(dev->port_usb,
skb,
&dev->rx_frames);
} else {
dev_kfree_skb_any(skb);
status = -ENOTCONN;
}
spin_unlock_irqrestore(&dev->lock, flags);
} else {
skb_queue_tail(&dev->rx_frames, skb);
}
skb = NULL;
skb2 = skb_dequeue(&dev->rx_frames);
while (skb2) {
if (status < 0
|| ETH_HLEN > skb2->len
|| skb2->len > GETHER_MAX_ETH_FRAME_LEN) {
dev->net->stats.rx_errors++;
dev->net->stats.rx_length_errors++;
DBG(dev, "rx length %d\n" , skb2->len);
dev_kfree_skb_any(skb2);
goto next_frame;
}
skb2->protocol = eth_type_trans(skb2, dev->net);
dev->net->stats.rx_packets++;
dev->net->stats.rx_bytes += skb2->len;
/* no buffer copies needed, unless hardware can't
* use skb buffers .
*/
status = netif_rx(skb2);
next_frame:
skb2 = skb_dequeue(&dev->rx_frames);
}
break ;
/* software-driven interface shutdown */
case -ECONNRESET: /* unlink */
case -ESHUTDOWN: /* disconnect etc */
VDBG(dev, "rx shutdown, code %d\n" , status);
goto quiesce;
/* for hardware automagic (such as pxa) */
case -ECONNABORTED: /* endpoint reset */
DBG(dev, "rx %s reset\n" , ep->name);
defer_kevent(dev, WORK_RX_MEMORY);
quiesce:
dev_kfree_skb_any(skb);
goto clean;
/* data overrun */
case -EOVERFLOW:
dev->net->stats.rx_over_errors++;
fallthrough;
default :
dev->net->stats.rx_errors++;
DBG(dev, "rx status %d\n" , status);
break ;
}
if (skb)
dev_kfree_skb_any(skb);
if (!netif_running(dev->net)) {
clean:
spin_lock(&dev->req_lock);
list_add(&req->list, &dev->rx_reqs);
spin_unlock(&dev->req_lock);
req = NULL;
}
if (req)
rx_submit(dev, req, GFP_ATOMIC);
}
static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
{
unsigned i;
struct usb_request *req;
if (!n)
return -ENOMEM;
/* queue/recycle up to N requests */
i = n;
list_for_each_entry(req, list, list) {
if (i-- == 0 )
goto extra;
}
while (i--) {
req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (!req)
return list_empty(list) ? -ENOMEM : 0 ;
list_add(&req->list, list);
}
return 0 ;
extra:
/* free extras */
for (;;) {
struct list_head *next;
next = req->list.next;
list_del(&req->list);
usb_ep_free_request(ep, req);
if (next == list)
break ;
req = container_of(next, struct usb_request, list);
}
return 0 ;
}
static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
{
int status;
spin_lock(&dev->req_lock);
status = prealloc(&dev->tx_reqs, link->in_ep, n);
if (status < 0 )
goto fail;
status = prealloc(&dev->rx_reqs, link->out_ep, n);
if (status < 0 )
goto fail;
goto done;
fail:
DBG(dev, "can't alloc requests\n" );
done:
spin_unlock(&dev->req_lock);
return status;
}
static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
{
struct usb_request *req;
unsigned long flags;
/* fill unused rxq slots with some skb */
spin_lock_irqsave(&dev->req_lock, flags);
while (!list_empty(&dev->rx_reqs)) {
req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
list_del_init(&req->list);
spin_unlock_irqrestore(&dev->req_lock, flags);
if (rx_submit(dev, req, gfp_flags) < 0 ) {
defer_kevent(dev, WORK_RX_MEMORY);
return ;
}
spin_lock_irqsave(&dev->req_lock, flags);
}
spin_unlock_irqrestore(&dev->req_lock, flags);
}
static void eth_work(struct work_struct *work)
{
struct eth_dev *dev = container_of(work, struct eth_dev, work);
if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) {
if (netif_running(dev->net))
rx_fill(dev, GFP_KERNEL);
}
if (dev->todo)
DBG(dev, "work done, flags = 0x%lx\n" , dev->todo);
}
static void tx_complete(struct usb_ep *ep, struct usb_request *req)
{
struct sk_buff *skb = req->context;
struct eth_dev *dev = ep->driver_data;
switch (req->status) {
default :
dev->net->stats.tx_errors++;
VDBG(dev, "tx err %d\n" , req->status);
fallthrough;
case -ECONNRESET: /* unlink */
case -ESHUTDOWN: /* disconnect etc */
dev_kfree_skb_any(skb);
break ;
case 0 :
dev->net->stats.tx_bytes += skb->len;
dev_consume_skb_any(skb);
}
dev->net->stats.tx_packets++;
spin_lock(&dev->req_lock);
list_add(&req->list, &dev->tx_reqs);
spin_unlock(&dev->req_lock);
atomic_dec(&dev->tx_qlen);
if (netif_carrier_ok(dev->net))
netif_wake_queue(dev->net);
}
static inline int is_promisc(u16 cdc_filter)
{
return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
}
static int ether_wakeup_host(struct gether *port)
{
int ret;
struct usb_function *func = &port->func;
struct usb_gadget *gadget = func->config->cdev->gadget;
if (func->func_suspended)
ret = usb_func_wakeup(func);
else
ret = usb_gadget_wakeup(gadget);
return ret;
}
static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
struct net_device *net)
{
struct eth_dev *dev = netdev_priv(net);
int length = 0 ;
int retval;
struct usb_request *req = NULL;
unsigned long flags;
struct usb_ep *in;
u16 cdc_filter;
spin_lock_irqsave(&dev->lock, flags);
if (dev->port_usb) {
in = dev->port_usb->in_ep;
cdc_filter = dev->port_usb->cdc_filter;
} else {
in = NULL;
cdc_filter = 0 ;
}
if (dev->port_usb && dev->port_usb->is_suspend) {
DBG(dev, "Port suspended. Triggering wakeup\n" );
netif_stop_queue(net);
spin_unlock_irqrestore(&dev->lock, flags);
ether_wakeup_host(dev->port_usb);
return NETDEV_TX_BUSY;
}
spin_unlock_irqrestore(&dev->lock, flags);
if (!in) {
if (skb)
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
/* apply outgoing CDC or RNDIS filters */
if (skb && !is_promisc(cdc_filter)) {
u8 *dest = skb->data;
if (is_multicast_ether_addr(dest)) {
u16 type;
/* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
* SET_ETHERNET_MULTICAST_FILTERS requests
*/
if (is_broadcast_ether_addr(dest))
type = USB_CDC_PACKET_TYPE_BROADCAST;
else
type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
if (!(cdc_filter & type)) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
}
/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
}
spin_lock_irqsave(&dev->req_lock, flags);
/*
* this freelist can be empty if an interrupt triggered disconnect ( )
* and reconfigured the gadget ( shutting down this queue ) after the
* network stack decided to xmit but before we got the spinlock .
*/
if (list_empty(&dev->tx_reqs)) {
spin_unlock_irqrestore(&dev->req_lock, flags);
return NETDEV_TX_BUSY;
}
req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
list_del(&req->list);
/* temporarily stop TX queue when the freelist empties */
if (list_empty(&dev->tx_reqs))
netif_stop_queue(net);
spin_unlock_irqrestore(&dev->req_lock, flags);
/* no buffer copies needed, unless the network stack did it
* or the hardware can ' t use skb buffers .
* or there ' s not enough space for extra headers we need
*/
if (dev->wrap) {
unsigned long flags;
spin_lock_irqsave(&dev->lock, flags);
if (dev->port_usb)
skb = dev->wrap(dev->port_usb, skb);
spin_unlock_irqrestore(&dev->lock, flags);
if (!skb) {
/* Multi frame CDC protocols may store the frame for
* later which is not a dropped frame .
*/
if (dev->port_usb &&
dev->port_usb->supports_multi_frame)
goto multiframe;
goto drop;
}
}
length = skb->len;
req->buf = skb->data;
req->context = skb;
req->complete = tx_complete;
/* NCM requires no zlp if transfer is dwNtbInMaxSize */
if (dev->port_usb &&
dev->port_usb->is_fixed &&
length == dev->port_usb->fixed_in_len &&
(length % in->maxpacket) == 0 )
req->zero = 0 ;
else
req->zero = 1 ;
/* use zlp framing on tx for strict CDC-Ether conformance,
* though any robust network rx path ignores extra padding .
* and some hardware doesn ' t like to write zlps .
*/
if (req->zero && !dev->zlp && (length % in->maxpacket) == 0 )
length++;
req->length = length;
retval = usb_ep_queue(in, req, GFP_ATOMIC);
switch (retval) {
default :
DBG(dev, "tx queue err %d\n" , retval);
break ;
case 0 :
netif_trans_update(net);
atomic_inc(&dev->tx_qlen);
}
if (retval) {
dev_kfree_skb_any(skb);
drop:
dev->net->stats.tx_dropped++;
multiframe:
spin_lock_irqsave(&dev->req_lock, flags);
if (list_empty(&dev->tx_reqs))
netif_start_queue(net);
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->req_lock, flags);
}
return NETDEV_TX_OK;
}
/*-------------------------------------------------------------------------*/
static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
{
DBG(dev, "%s\n" , __func__);
/* fill the rx queue */
rx_fill(dev, gfp_flags);
/* and open the tx floodgates */
atomic_set(&dev->tx_qlen, 0 );
netif_wake_queue(dev->net);
}
static int eth_open(struct net_device *net)
{
struct eth_dev *dev = netdev_priv(net);
struct gether *link;
DBG(dev, "%s\n" , __func__);
if (netif_carrier_ok(dev->net))
eth_start(dev, GFP_KERNEL);
spin_lock_irq(&dev->lock);
link = dev->port_usb;
if (link && link->open)
link->open(link);
spin_unlock_irq(&dev->lock);
return 0 ;
}
static int eth_stop(struct net_device *net)
{
struct eth_dev *dev = netdev_priv(net);
unsigned long flags;
VDBG(dev, "%s\n" , __func__);
netif_stop_queue(net);
DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n" ,
dev->net->stats.rx_packets, dev->net->stats.tx_packets,
dev->net->stats.rx_errors, dev->net->stats.tx_errors
);
/* ensure there are no more active requests */
spin_lock_irqsave(&dev->lock, flags);
if (dev->port_usb) {
struct gether *link = dev->port_usb;
const struct usb_endpoint_descriptor *in;
const struct usb_endpoint_descriptor *out;
if (link->close)
link->close(link);
/* NOTE: we have no abort-queue primitive we could use
* to cancel all pending I / O . Instead , we disable then
* reenable the endpoints . . . this idiom may leave toggle
* wrong , but that ' s a self - correcting error .
*
* REVISIT : we * COULD * just let the transfers complete at
* their own pace ; the network stack can handle old packets .
* For the moment we leave this here , since it works .
*/
in = link->in_ep->desc;
out = link->out_ep->desc;
usb_ep_disable(link->in_ep);
usb_ep_disable(link->out_ep);
if (netif_carrier_ok(net)) {
DBG(dev, "host still using in/out endpoints\n" );
link->in_ep->desc = in;
link->out_ep->desc = out;
usb_ep_enable(link->in_ep);
usb_ep_enable(link->out_ep);
}
}
spin_unlock_irqrestore(&dev->lock, flags);
return 0 ;
}
/*-------------------------------------------------------------------------*/
static int get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
unsigned i;
for (i = 0 ; i < 6 ; i++) {
unsigned char num;
if ((*str == '.' ) || (*str == ':' ))
str++;
num = hex_to_bin(*str++) << 4 ;
num |= hex_to_bin(*str++);
dev_addr [i] = num;
}
if (is_valid_ether_addr(dev_addr))
return 0 ;
}
eth_random_addr(dev_addr);
return 1 ;
}
static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len)
{
if (len < 18 )
return -EINVAL;
snprintf(str, len, "%pM" , dev_addr);
return 18 ;
}
static const struct net_device_ops eth_netdev_ops = {
.ndo_open = eth_open,
.ndo_stop = eth_stop,
.ndo_start_xmit = eth_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
static const struct device_type gadget_type = {
.name = "gadget" ,
};
/*
* gether_setup_name - initialize one ethernet - over - usb link
* @ g : gadget to associated with these links
* @ ethaddr : NULL , or a buffer in which the ethernet address of the
* host side of the link is recorded
* @ netname : name for network device ( for example , " usb " )
* Context : may sleep
*
* This sets up the single network link that may be exported by a
* gadget driver using this framework . The link layer addresses are
* set up using module parameters .
*
* Returns an eth_dev pointer on success , or an ERR_PTR on failure .
*/
struct eth_dev *gether_setup_name(struct usb_gadget *g,
const char *dev_addr, const char *host_addr,
u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname)
{
struct eth_dev *dev;
struct net_device *net;
int status;
u8 addr[ETH_ALEN];
net = alloc_etherdev(sizeof *dev);
if (!net)
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->rx_reqs);
skb_queue_head_init(&dev->rx_frames);
/* network device setup */
dev->net = net;
dev->qmult = qmult;
snprintf(net->name, sizeof (net->name), "%s%%d" , netname);
if (get_ether_addr(dev_addr, addr)) {
net->addr_assign_type = NET_ADDR_RANDOM;
dev_warn(&g->dev,
"using random %s ethernet address\n" , "self" );
} else {
net->addr_assign_type = NET_ADDR_SET;
}
eth_hw_addr_set(net, addr);
if (get_ether_addr(host_addr, dev->host_mac))
dev_warn(&g->dev,
"using random %s ethernet address\n" , "host" );
if (ethaddr)
memcpy(ethaddr, dev->host_mac, ETH_ALEN);
net->netdev_ops = ð_netdev_ops;
net->ethtool_ops = &ops;
/* MTU range: 14 - 15412 */
net->min_mtu = ETH_HLEN;
net->max_mtu = GETHER_MAX_MTU_SIZE;
dev->gadget = g;
SET_NETDEV_DEV(net, &g->dev);
SET_NETDEV_DEVTYPE(net, &gadget_type);
status = register_netdev(net);
if (status < 0 ) {
dev_dbg(&g->dev, "register_netdev failed, %d\n" , status);
free_netdev(net);
dev = ERR_PTR(status);
} else {
INFO(dev, "MAC %pM\n" , net->dev_addr);
INFO(dev, "HOST MAC %pM\n" , dev->host_mac);
/*
* two kinds of host - initiated state changes :
* - iff DATA transfer is active , carrier is " on "
* - tx queueing enabled if open * and * carrier is " on "
*/
netif_carrier_off(net);
}
return dev;
}
EXPORT_SYMBOL_GPL(gether_setup_name);
struct net_device *gether_setup_name_default(const char *netname)
{
struct net_device *net;
struct eth_dev *dev;
net = alloc_etherdev(sizeof (*dev));
if (!net)
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->rx_reqs);
skb_queue_head_init(&dev->rx_frames);
/* network device setup */
dev->net = net;
dev->qmult = QMULT_DEFAULT;
snprintf(net->name, sizeof (net->name), "%s%%d" , netname);
eth_random_addr(dev->dev_mac);
/* by default we always have a random MAC address */
net->addr_assign_type = NET_ADDR_RANDOM;
eth_random_addr(dev->host_mac);
net->netdev_ops = ð_netdev_ops;
net->ethtool_ops = &ops;
SET_NETDEV_DEVTYPE(net, &gadget_type);
/* MTU range: 14 - 15412 */
net->min_mtu = ETH_HLEN;
net->max_mtu = GETHER_MAX_MTU_SIZE;
return net;
}
EXPORT_SYMBOL_GPL(gether_setup_name_default);
int gether_register_netdev(struct net_device *net)
{
struct eth_dev *dev;
struct usb_gadget *g;
int status;
if (!net->dev.parent)
return -EINVAL;
dev = netdev_priv(net);
g = dev->gadget;
eth_hw_addr_set(net, dev->dev_mac);
status = register_netdev(net);
if (status < 0 ) {
dev_dbg(&g->dev, "register_netdev failed, %d\n" , status);
return status;
} else {
INFO(dev, "HOST MAC %pM\n" , dev->host_mac);
INFO(dev, "MAC %pM\n" , dev->dev_mac);
/* two kinds of host-initiated state changes:
* - iff DATA transfer is active , carrier is " on "
* - tx queueing enabled if open * and * carrier is " on "
*/
netif_carrier_off(net);
}
return status;
}
EXPORT_SYMBOL_GPL(gether_register_netdev);
void gether_set_gadget(struct net_device *net, struct usb_gadget *g)
{
struct eth_dev *dev;
dev = netdev_priv(net);
dev->gadget = g;
SET_NETDEV_DEV(net, &g->dev);
}
EXPORT_SYMBOL_GPL(gether_set_gadget);
int gether_set_dev_addr(struct net_device *net, const char *dev_addr)
{
struct eth_dev *dev;
u8 new_addr[ETH_ALEN];
dev = netdev_priv(net);
if (get_ether_addr(dev_addr, new_addr))
return -EINVAL;
memcpy(dev->dev_mac, new_addr, ETH_ALEN);
net->addr_assign_type = NET_ADDR_SET;
return 0 ;
}
EXPORT_SYMBOL_GPL(gether_set_dev_addr);
int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len)
{
struct eth_dev *dev;
int ret;
dev = netdev_priv(net);
ret = get_ether_addr_str(dev->dev_mac, dev_addr, len);
if (ret + 1 < len) {
dev_addr[ret++] = '\n' ;
dev_addr[ret] = '\0' ;
}
return ret;
}
EXPORT_SYMBOL_GPL(gether_get_dev_addr);
int gether_set_host_addr(struct net_device *net, const char *host_addr)
{
struct eth_dev *dev;
u8 new_addr[ETH_ALEN];
dev = netdev_priv(net);
if (get_ether_addr(host_addr, new_addr))
return -EINVAL;
memcpy(dev->host_mac, new_addr, ETH_ALEN);
return 0 ;
}
EXPORT_SYMBOL_GPL(gether_set_host_addr);
int gether_get_host_addr(struct net_device *net, char *host_addr, int len)
{
struct eth_dev *dev;
int ret;
dev = netdev_priv(net);
ret = get_ether_addr_str(dev->host_mac, host_addr, len);
if (ret + 1 < len) {
host_addr[ret++] = '\n' ;
host_addr[ret] = '\0' ;
}
return ret;
}
EXPORT_SYMBOL_GPL(gether_get_host_addr);
int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len)
{
struct eth_dev *dev;
if (len < 13 )
return -EINVAL;
dev = netdev_priv(net);
snprintf(host_addr, len, "%pm" , dev->host_mac);
string_upper(host_addr, host_addr);
return strlen(host_addr);
}
EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc);
void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN])
{
struct eth_dev *dev;
dev = netdev_priv(net);
memcpy(host_mac, dev->host_mac, ETH_ALEN);
}
EXPORT_SYMBOL_GPL(gether_get_host_addr_u8);
void gether_set_qmult(struct net_device *net, unsigned qmult)
{
struct eth_dev *dev;
dev = netdev_priv(net);
dev->qmult = qmult;
}
EXPORT_SYMBOL_GPL(gether_set_qmult);
unsigned gether_get_qmult(struct net_device *net)
{
struct eth_dev *dev;
dev = netdev_priv(net);
return dev->qmult;
}
EXPORT_SYMBOL_GPL(gether_get_qmult);
int gether_get_ifname(struct net_device *net, char *name, int len)
{
struct eth_dev *dev = netdev_priv(net);
int ret;
rtnl_lock();
ret = scnprintf(name, len, "%s\n" ,
dev->ifname_set ? net->name : netdev_name(net));
rtnl_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(gether_get_ifname);
int gether_set_ifname(struct net_device *net, const char *name, int len)
{
struct eth_dev *dev = netdev_priv(net);
char tmp[IFNAMSIZ];
const char *p;
if (name[len - 1 ] == '\n' )
len--;
if (len >= sizeof (tmp))
return -E2BIG;
strscpy(tmp, name, len + 1 );
if (!dev_valid_name(tmp))
return -EINVAL;
/* Require exactly one %d, so binding will not fail with EEXIST. */
p = strchr(name, '%' );
if (!p || p[1 ] != 'd' || strchr(p + 2 , '%' ))
return -EINVAL;
strscpy(net->name, tmp);
dev->ifname_set = true ;
return 0 ;
}
EXPORT_SYMBOL_GPL(gether_set_ifname);
void gether_suspend(struct gether *link)
{
struct eth_dev *dev = link->ioport;
unsigned long flags;
if (!dev)
return ;
if (atomic_read(&dev->tx_qlen)) {
/*
* There is a transfer in progress . So we trigger a remote
* wakeup to inform the host .
*/
if (!ether_wakeup_host(dev->port_usb))
return ;
}
spin_lock_irqsave(&dev->lock, flags);
link->is_suspend = true ;
spin_unlock_irqrestore(&dev->lock, flags);
}
EXPORT_SYMBOL_GPL(gether_suspend);
void gether_resume(struct gether *link)
{
struct eth_dev *dev = link->ioport;
unsigned long flags;
if (!dev)
return ;
if (netif_queue_stopped(dev->net))
netif_start_queue(dev->net);
spin_lock_irqsave(&dev->lock, flags);
link->is_suspend = false ;
spin_unlock_irqrestore(&dev->lock, flags);
}
EXPORT_SYMBOL_GPL(gether_resume);
/*
* gether_cleanup - remove Ethernet - over - USB device
* Context : may sleep
*
* This is called to free all resources allocated by @ gether_setup ( ) .
*/
void gether_cleanup(struct eth_dev *dev)
{
if (!dev)
return ;
unregister_netdev(dev->net);
flush_work(&dev->work);
free_netdev(dev->net);
}
EXPORT_SYMBOL_GPL(gether_cleanup);
/**
* gether_connect - notify network layer that USB link is active
* @ link : the USB link , set up with endpoints , descriptors matching
* current device speed , and any framing wrapper ( s ) set up .
* Context : irqs blocked
*
* This is called to activate endpoints and let the network layer know
* the connection is active ( " carrier detect " ) . It may cause the I / O
* queues to open and start letting network packets flow , but will in
* any case activate the endpoints so that they respond properly to the
* USB host .
*
* Verify net_device pointer returned using IS_ERR ( ) . If it doesn ' t
* indicate some error code ( negative errno ) , ep - > driver_data values
* have been overwritten .
*/
struct net_device *gether_connect(struct gether *link)
{
struct eth_dev *dev = link->ioport;
int result = 0 ;
if (!dev)
return ERR_PTR(-EINVAL);
link->in_ep->driver_data = dev;
result = usb_ep_enable(link->in_ep);
if (result != 0 ) {
DBG(dev, "enable %s --> %d\n" ,
link->in_ep->name, result);
goto fail0;
}
link->out_ep->driver_data = dev;
result = usb_ep_enable(link->out_ep);
if (result != 0 ) {
DBG(dev, "enable %s --> %d\n" ,
link->out_ep->name, result);
goto fail1;
}
if (result == 0 )
result = alloc_requests(dev, link, qlen(dev->gadget,
dev->qmult));
if (result == 0 ) {
dev->zlp = link->is_zlp_ok;
dev->no_skb_reserve = gadget_avoids_skb_reserve(dev->gadget);
DBG(dev, "qlen %d\n" , qlen(dev->gadget, dev->qmult));
dev->header_len = link->header_len;
dev->unwrap = link->unwrap;
dev->wrap = link->wrap;
spin_lock(&dev->lock);
dev->port_usb = link;
if (netif_running(dev->net)) {
if (link->open)
link->open(link);
} else {
if (link->close)
link->close(link);
}
spin_unlock(&dev->lock);
netif_carrier_on(dev->net);
if (netif_running(dev->net))
eth_start(dev, GFP_ATOMIC);
/* on error, disable any endpoints */
} else {
(void ) usb_ep_disable(link->out_ep);
fail1:
(void ) usb_ep_disable(link->in_ep);
}
fail0:
/* caller is responsible for cleanup on error */
if (result < 0 )
return ERR_PTR(result);
return dev->net;
}
EXPORT_SYMBOL_GPL(gether_connect);
/**
* gether_disconnect - notify network layer that USB link is inactive
* @ link : the USB link , on which gether_connect ( ) was called
* Context : irqs blocked
*
* This is called to deactivate endpoints and let the network layer know
* the connection went inactive ( " no carrier " ) .
*
* On return , the state is as if gether_connect ( ) had never been called .
* The endpoints are inactive , and accordingly without active USB I / O .
* Pointers to endpoint descriptors and endpoint private data are nulled .
*/
void gether_disconnect(struct gether *link)
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
WARN_ON(!dev);
if (!dev)
return ;
DBG(dev, "%s\n" , __func__);
netif_stop_queue(dev->net);
netif_carrier_off(dev->net);
/* disable endpoints, forcing (synchronous) completion
* of all pending i / o . then free the request objects
* and forget about the endpoints .
*/
usb_ep_disable(link->in_ep);
spin_lock(&dev->req_lock);
while (!list_empty(&dev->tx_reqs)) {
req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
usb_ep_free_request(link->in_ep, req);
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
link->in_ep->desc = NULL;
usb_ep_disable(link->out_ep);
spin_lock(&dev->req_lock);
while (!list_empty(&dev->rx_reqs)) {
req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
list_del(&req->list);
spin_unlock(&dev->req_lock);
usb_ep_free_request(link->out_ep, req);
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
link->out_ep->desc = NULL;
/* finish forgetting about this USB link episode */
dev->header_len = 0 ;
dev->unwrap = NULL;
dev->wrap = NULL;
spin_lock(&dev->lock);
dev->port_usb = NULL;
link->is_suspend = false ;
spin_unlock(&dev->lock);
}
EXPORT_SYMBOL_GPL(gether_disconnect);
MODULE_DESCRIPTION("Ethernet-over-USB link layer utilities for Gadget stack" );
MODULE_LICENSE("GPL" );
MODULE_AUTHOR("David Brownell" );
Messung V0.5 in Prozent C=88 H=96 G=91
¤ Dauer der Verarbeitung: 0.22 Sekunden
(vorverarbeitet am 2026-10-11)
¤
*© Formatika GbR, Deutschland