Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/media/rc/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 5 kB image not shown  

Quelle  gpio-ir-recv.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
 */


#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/pm_qos.h>
#include <linux/irq.h>
#include <media/rc-core.h>

#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"

struct gpio_rc_dev {
 struct rc_dev *rcdev;
 struct gpio_desc *gpiod;
 int irq;
 struct device *pmdev;
 struct pm_qos_request qos;
};

static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
{
 int val;
 struct gpio_rc_dev *gpio_dev = dev_id;
 struct device *pmdev = gpio_dev->pmdev;

 /*
 * For some cpuidle systems, not all:
 * Respond to interrupt taking more latency when cpu in idle.
 * Invoke asynchronous pm runtime get from interrupt context,
 * this may introduce a millisecond delay to call resume callback,
 * where to disable cpuilde.
 *
 * Two issues lead to fail to decode first frame, one is latency to
 * respond to interrupt, another is delay introduced by async api.
 */

 if (pmdev)
  pm_runtime_get(pmdev);

 val = gpiod_get_value(gpio_dev->gpiod);
 if (val >= 0)
  ir_raw_event_store_edge(gpio_dev->rcdev, val == 1);

 if (pmdev)
  pm_runtime_put_autosuspend(pmdev);

 return IRQ_HANDLED;
}

static int gpio_ir_recv_probe(struct platform_device *pdev)
{
 struct device *dev = &pdev->dev;
 struct device_node *np = dev->of_node;
 struct gpio_rc_dev *gpio_dev;
 struct rc_dev *rcdev;
 u32 period = 0;
 int rc;

 if (!np)
  return -ENODEV;

 gpio_dev = devm_kzalloc(dev, sizeof(*gpio_dev), GFP_KERNEL);
 if (!gpio_dev)
  return -ENOMEM;

 gpio_dev->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
 if (IS_ERR(gpio_dev->gpiod))
  return dev_err_probe(dev, PTR_ERR(gpio_dev->gpiod),
         "error getting gpio\n");
 gpio_dev->irq = gpiod_to_irq(gpio_dev->gpiod);
 if (gpio_dev->irq < 0)
  return gpio_dev->irq;

 rcdev = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW);
 if (!rcdev)
  return -ENOMEM;

 rcdev->priv = gpio_dev;
 rcdev->device_name = GPIO_IR_DEVICE_NAME;
 rcdev->input_phys = GPIO_IR_DEVICE_NAME "/input0";
 rcdev->input_id.bustype = BUS_HOST;
 rcdev->input_id.vendor = 0x0001;
 rcdev->input_id.product = 0x0001;
 rcdev->input_id.version = 0x0100;
 rcdev->dev.parent = dev;
 rcdev->driver_name = KBUILD_MODNAME;
 rcdev->min_timeout = 1;
 rcdev->timeout = IR_DEFAULT_TIMEOUT;
 rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
 rcdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
 rcdev->map_name = of_get_property(np, "linux,rc-map-name", NULL);
 if (!rcdev->map_name)
  rcdev->map_name = RC_MAP_EMPTY;

 gpio_dev->rcdev = rcdev;
 if (of_property_read_bool(np, "wakeup-source"))
  device_init_wakeup(dev, true);

 rc = devm_rc_register_device(dev, rcdev);
 if (rc < 0) {
  dev_err(dev, "failed to register rc device (%d)\n", rc);
  return rc;
 }

 of_property_read_u32(np, "linux,autosuspend-period", &period);
 if (period) {
  gpio_dev->pmdev = dev;
  pm_runtime_set_autosuspend_delay(dev, period);
  pm_runtime_use_autosuspend(dev);
  pm_runtime_set_suspended(dev);
  pm_runtime_enable(dev);
 }

 platform_set_drvdata(pdev, gpio_dev);

 return devm_request_irq(dev, gpio_dev->irq, gpio_ir_recv_irq,
    IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
    "gpio-ir-recv-irq", gpio_dev);
}

static void gpio_ir_recv_remove(struct platform_device *pdev)
{
 struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
 struct device *pmdev = gpio_dev->pmdev;

 if (pmdev) {
  pm_runtime_get_sync(pmdev);
  cpu_latency_qos_remove_request(&gpio_dev->qos);

  pm_runtime_disable(pmdev);
  pm_runtime_put_noidle(pmdev);
  pm_runtime_set_suspended(pmdev);
 }
}

#ifdef CONFIG_PM
static int gpio_ir_recv_suspend(struct device *dev)
{
 struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev);

 if (device_may_wakeup(dev))
  enable_irq_wake(gpio_dev->irq);
 else
  disable_irq(gpio_dev->irq);

 return 0;
}

static int gpio_ir_recv_resume(struct device *dev)
{
 struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev);

 if (device_may_wakeup(dev))
  disable_irq_wake(gpio_dev->irq);
 else
  enable_irq(gpio_dev->irq);

 return 0;
}

static int gpio_ir_recv_runtime_suspend(struct device *dev)
{
 struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev);

 cpu_latency_qos_remove_request(&gpio_dev->qos);

 return 0;
}

static int gpio_ir_recv_runtime_resume(struct device *dev)
{
 struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev);

 cpu_latency_qos_add_request(&gpio_dev->qos, 0);

 return 0;
}

static const struct dev_pm_ops gpio_ir_recv_pm_ops = {
 .suspend        = gpio_ir_recv_suspend,
 .resume         = gpio_ir_recv_resume,
 .runtime_suspend = gpio_ir_recv_runtime_suspend,
 .runtime_resume  = gpio_ir_recv_runtime_resume,
};
#endif

static const struct of_device_id gpio_ir_recv_of_match[] = {
 { .compatible = "gpio-ir-receiver", },
 { },
};
MODULE_DEVICE_TABLE(of, gpio_ir_recv_of_match);

static struct platform_driver gpio_ir_recv_driver = {
 .probe  = gpio_ir_recv_probe,
 .remove = gpio_ir_recv_remove,
 .driver = {
  .name   = KBUILD_MODNAME,
  .of_match_table = gpio_ir_recv_of_match,
#ifdef CONFIG_PM
  .pm = &gpio_ir_recv_pm_ops,
#endif
 },
};
module_platform_driver(gpio_ir_recv_driver);

MODULE_DESCRIPTION("GPIO IR Receiver driver");
MODULE_LICENSE("GPL v2");

Messung V0.5
C=94 H=98 G=95

¤ Dauer der Verarbeitung: 0.1 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.