// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for the Conexant CX23885 PCIe bridge
*
* Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*/
#include "cx23885.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm /io.h>
#include <media/v4l2-common.h>
static unsigned int i2c_debug;
module_param(i2c_debug, int , 0644 );
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]" );
static unsigned int i2c_scan;
module_param(i2c_scan, int , 0444 );
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time" );
#define dprintk(level, fmt, arg...)\
do { if (i2c_debug >= level)\
printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \
__func__, ## arg); \
} while (0 )
#define I2C_WAIT_DELAY 32
#define I2C_WAIT_RETRY 64
#define I2C_EXTEND (1 << 3 )
#define I2C_NOSTOP (1 << 4 )
static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
{
struct cx23885_i2c *bus = i2c_adap->algo_data;
struct cx23885_dev *dev = bus->dev;
return cx_read(bus->reg_stat) & 0 x01;
}
static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
{
struct cx23885_i2c *bus = i2c_adap->algo_data;
struct cx23885_dev *dev = bus->dev;
return cx_read(bus->reg_stat) & 0 x02 ? 1 : 0 ;
}
static int i2c_wait_done(struct i2c_adapter *i2c_adap)
{
int count;
for (count = 0 ; count < I2C_WAIT_RETRY; count++) {
if (!i2c_is_busy(i2c_adap))
break ;
udelay(I2C_WAIT_DELAY);
}
if (I2C_WAIT_RETRY == count)
return 0 ;
return 1 ;
}
static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg, int joined_rlen)
{
struct cx23885_i2c *bus = i2c_adap->algo_data;
struct cx23885_dev *dev = bus->dev;
u32 wdata, addr, ctrl;
int retval, cnt;
if (joined_rlen)
dprintk(1 , "%s(msg->wlen=%d, nextmsg->rlen=%d)\n" , __func__,
msg->len, joined_rlen);
else
dprintk(1 , "%s(msg->len=%d)\n" , __func__, msg->len);
/* Deal with i2c probe functions with zero payload */
if (msg->len == 0 ) {
cx_write(bus->reg_addr, msg->addr << 25 );
cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2 ));
if (!i2c_wait_done(i2c_adap))
return -EIO;
if (!i2c_slave_did_ack(i2c_adap))
return -ENXIO;
dprintk(1 , "%s() returns 0\n" , __func__);
return 0 ;
}
/* dev, reg + first byte */
addr = (msg->addr << 25 ) | msg->buf[0 ];
wdata = msg->buf[0 ];
ctrl = bus->i2c_period | (1 << 12 ) | (1 << 2 );
if (msg->len > 1 )
ctrl |= I2C_NOSTOP | I2C_EXTEND;
else if (joined_rlen)
ctrl |= I2C_NOSTOP;
cx_write(bus->reg_addr, addr);
cx_write(bus->reg_wdata, wdata);
cx_write(bus->reg_ctrl, ctrl);
if (!i2c_wait_done(i2c_adap))
goto eio;
if (i2c_debug) {
printk(KERN_DEBUG " <W %02x %02x" , msg->addr << 1 , msg->buf[0 ]);
if (!(ctrl & I2C_NOSTOP))
pr_cont(" >\n" );
}
for (cnt = 1 ; cnt < msg->len; cnt++) {
/* following bytes */
wdata = msg->buf[cnt];
ctrl = bus->i2c_period | (1 << 12 ) | (1 << 2 );
if (cnt < msg->len - 1 )
ctrl |= I2C_NOSTOP | I2C_EXTEND;
else if (joined_rlen)
ctrl |= I2C_NOSTOP;
cx_write(bus->reg_addr, addr);
cx_write(bus->reg_wdata, wdata);
cx_write(bus->reg_ctrl, ctrl);
if (!i2c_wait_done(i2c_adap))
goto eio;
if (i2c_debug) {
pr_cont(" %02x" , msg->buf[cnt]);
if (!(ctrl & I2C_NOSTOP))
pr_cont(" >\n" );
}
}
return msg->len;
eio:
retval = -EIO;
if (i2c_debug)
pr_err(" ERR: %d\n" , retval);
return retval;
}
static int i2c_readbytes(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg, int joined)
{
struct cx23885_i2c *bus = i2c_adap->algo_data;
struct cx23885_dev *dev = bus->dev;
u32 ctrl, cnt;
int retval;
if (i2c_debug && !joined)
dprintk(1 , "%s(msg->len=%d)\n" , __func__, msg->len);
/* Deal with i2c probe functions with zero payload */
if (msg->len == 0 ) {
cx_write(bus->reg_addr, msg->addr << 25 );
cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2 ) | 1 );
if (!i2c_wait_done(i2c_adap))
return -EIO;
if (!i2c_slave_did_ack(i2c_adap))
return -ENXIO;
dprintk(1 , "%s() returns 0\n" , __func__);
return 0 ;
}
if (i2c_debug) {
if (joined)
dprintk(1 , " R" );
else
dprintk(1 , " <R %02x" , (msg->addr << 1 ) + 1 );
}
for (cnt = 0 ; cnt < msg->len; cnt++) {
ctrl = bus->i2c_period | (1 << 12 ) | (1 << 2 ) | 1 ;
if (cnt < msg->len - 1 )
ctrl |= I2C_NOSTOP | I2C_EXTEND;
cx_write(bus->reg_addr, msg->addr << 25 );
cx_write(bus->reg_ctrl, ctrl);
if (!i2c_wait_done(i2c_adap))
goto eio;
msg->buf[cnt] = cx_read(bus->reg_rdata) & 0 xff;
if (i2c_debug) {
dprintk(1 , " %02x" , msg->buf[cnt]);
if (!(ctrl & I2C_NOSTOP))
dprintk(1 , " >\n" );
}
}
return msg->len;
eio:
retval = -EIO;
if (i2c_debug)
pr_err(" ERR: %d\n" , retval);
return retval;
}
static int i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg *msgs, int num)
{
int i, retval = 0 ;
dprintk(1 , "%s(num = %d)\n" , __func__, num);
for (i = 0 ; i < num; i++) {
dprintk(1 , "%s(num = %d) addr = 0x%02x len = 0x%x\n" ,
__func__, num, msgs[i].addr, msgs[i].len);
if (msgs[i].flags & I2C_M_RD) {
/* read */
retval = i2c_readbytes(i2c_adap, &msgs[i], 0 );
} else if (i + 1 < num && (msgs[i + 1 ].flags & I2C_M_RD) &&
msgs[i].addr == msgs[i + 1 ].addr) {
/* write then read from same address */
retval = i2c_sendbytes(i2c_adap, &msgs[i],
msgs[i + 1 ].len);
if (retval < 0 )
goto err;
i++;
retval = i2c_readbytes(i2c_adap, &msgs[i], 1 );
} else {
/* write */
retval = i2c_sendbytes(i2c_adap, &msgs[i], 0 );
}
if (retval < 0 )
goto err;
}
return num;
err:
return retval;
}
static u32 cx23885_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
}
static const struct i2c_algorithm cx23885_i2c_algo_template = {
.master_xfer = i2c_xfer,
.functionality = cx23885_functionality,
};
/* ----------------------------------------------------------------------- */
static const struct i2c_adapter cx23885_i2c_adap_template = {
.name = "cx23885" ,
.owner = THIS_MODULE,
.algo = &cx23885_i2c_algo_template,
};
static const struct i2c_client cx23885_i2c_client_template = {
.name = "cx23885 internal" ,
};
static char *i2c_devs[128 ] = {
[0 x10 >> 1 ] = "tda10048" ,
[0 x12 >> 1 ] = "dib7000pc" ,
[0 x1c >> 1 ] = "lgdt3303" ,
[0 x80 >> 1 ] = "cs3308" ,
[0 x82 >> 1 ] = "cs3308" ,
[0 x86 >> 1 ] = "tda9887" ,
[0 x32 >> 1 ] = "cx24227" ,
[0 x88 >> 1 ] = "cx25837" ,
[0 x84 >> 1 ] = "tda8295" ,
[0 x98 >> 1 ] = "flatiron" ,
[0 xa0 >> 1 ] = "eeprom" ,
[0 xc0 >> 1 ] = "tuner/mt2131/tda8275" ,
[0 xc2 >> 1 ] = "tuner/mt2131/tda8275/xc5000/xc3028" ,
[0 xc8 >> 1 ] = "tuner/xc3028L" ,
};
static void do_i2c_scan(char *name, struct i2c_client *c)
{
unsigned char buf;
int i, rc;
for (i = 0 ; i < 128 ; i++) {
c->addr = i;
rc = i2c_master_recv(c, &buf, 0 );
if (rc < 0 )
continue ;
pr_info("%s: i2c scan: found device @ 0x%04x [%s]\n" ,
name, i, i2c_devs[i] ? i2c_devs[i] : "???" );
}
}
/* init + register i2c adapter */
int cx23885_i2c_register(struct cx23885_i2c *bus)
{
struct cx23885_dev *dev = bus->dev;
dprintk(1 , "%s(bus = %d)\n" , __func__, bus->nr);
bus->i2c_adap = cx23885_i2c_adap_template;
bus->i2c_client = cx23885_i2c_client_template;
bus->i2c_adap.dev.parent = &dev->pci->dev;
strscpy(bus->i2c_adap.name, bus->dev->name,
sizeof (bus->i2c_adap.name));
bus->i2c_adap.algo_data = bus;
i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
i2c_add_adapter(&bus->i2c_adap);
bus->i2c_client.adapter = &bus->i2c_adap;
if (0 == bus->i2c_rc) {
dprintk(1 , "%s: i2c bus %d registered\n" , dev->name, bus->nr);
if (i2c_scan) {
pr_info("%s: scan bus %d:\n" ,
dev->name, bus->nr);
do_i2c_scan(dev->name, &bus->i2c_client);
}
} else
pr_warn("%s: i2c bus %d register FAILED\n" ,
dev->name, bus->nr);
/* Instantiate the IR receiver device, if present */
if (0 == bus->i2c_rc) {
struct i2c_board_info info;
static const unsigned short addr_list[] = {
0 x6b, I2C_CLIENT_END
};
memset(&info, 0 , sizeof (struct i2c_board_info));
strscpy(info.type, "ir_video" , I2C_NAME_SIZE);
/* Use quick read command for probe, some IR chips don't
* support writes */
i2c_new_scanned_device(&bus->i2c_adap, &info, addr_list,
i2c_probe_func_quick_read);
}
return bus->i2c_rc;
}
int cx23885_i2c_unregister(struct cx23885_i2c *bus)
{
i2c_del_adapter(&bus->i2c_adap);
return 0 ;
}
void cx23885_av_clk(struct cx23885_dev *dev, int enable)
{
/* write 0 to bus 2 addr 0x144 via i2x_xfer() */
char buffer[3 ];
struct i2c_msg msg;
dprintk(1 , "%s(enabled = %d)\n" , __func__, enable);
/* Register 0x144 */
buffer[0 ] = 0 x01;
buffer[1 ] = 0 x44;
if (enable == 1 )
buffer[2 ] = 0 x05;
else
buffer[2 ] = 0 x00;
msg.addr = 0 x44;
msg.flags = I2C_M_TEN;
msg.len = 3 ;
msg.buf = buffer;
i2c_xfer(&dev->i2c_bus[2 ].i2c_adap, &msg, 1 );
}
Messung V0.5 in Prozent C=94 H=93 G=93
¤ Dauer der Verarbeitung: 0.21 Sekunden
(vorverarbeitet am 2026-06-07)
¤
*© Formatika GbR, Deutschland