// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LPC32xx built - in touchscreen driver
*
* Copyright ( C ) 2010 NXP Semiconductors
*/
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/of.h>
/*
* Touchscreen controller register offsets
*/
#define LPC32XX_TSC_STAT 0 x00
#define LPC32XX_TSC_SEL 0 x04
#define LPC32XX_TSC_CON 0 x08
#define LPC32XX_TSC_FIFO 0 x0C
#define LPC32XX_TSC_DTR 0 x10
#define LPC32XX_TSC_RTR 0 x14
#define LPC32XX_TSC_UTR 0 x18
#define LPC32XX_TSC_TTR 0 x1C
#define LPC32XX_TSC_DXP 0 x20
#define LPC32XX_TSC_MIN_X 0 x24
#define LPC32XX_TSC_MAX_X 0 x28
#define LPC32XX_TSC_MIN_Y 0 x2C
#define LPC32XX_TSC_MAX_Y 0 x30
#define LPC32XX_TSC_AUX_UTR 0 x34
#define LPC32XX_TSC_AUX_MIN 0 x38
#define LPC32XX_TSC_AUX_MAX 0 x3C
#define LPC32XX_TSC_STAT_FIFO_OVRRN BIT(8 )
#define LPC32XX_TSC_STAT_FIFO_EMPTY BIT(7 )
#define LPC32XX_TSC_SEL_DEFVAL 0 x0284
#define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 (0 x1 << 11 )
#define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s) ((10 - (s)) << 7 )
#define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s) ((10 - (s)) << 4 )
#define LPC32XX_TSC_ADCCON_POWER_UP BIT(2 )
#define LPC32XX_TSC_ADCCON_AUTO_EN BIT(0 )
#define LPC32XX_TSC_FIFO_TS_P_LEVEL BIT(31 )
#define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x) (((x) & 0 x03FF0000) >> 16 )
#define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y) ((y) & 0 x000003FF)
#define LPC32XX_TSC_ADCDAT_VALUE_MASK 0 x000003FF
#define LPC32XX_TSC_MIN_XY_VAL 0 x0
#define LPC32XX_TSC_MAX_XY_VAL 0 x3FF
#define MOD_NAME "ts-lpc32xx"
#define tsc_readl(dev, reg) \
__raw_readl((dev)->tsc_base + (reg))
#define tsc_writel(dev, reg, val) \
__raw_writel((val), (dev)->tsc_base + (reg))
struct lpc32xx_tsc {
struct input_dev *dev;
void __iomem *tsc_base;
int irq;
struct clk *clk;
};
static void lpc32xx_fifo_clear(struct lpc32xx_tsc *tsc)
{
while (!(tsc_readl(tsc, LPC32XX_TSC_STAT) &
LPC32XX_TSC_STAT_FIFO_EMPTY))
tsc_readl(tsc, LPC32XX_TSC_FIFO);
}
static irqreturn_t lpc32xx_ts_interrupt(int irq, void *dev_id)
{
u32 tmp, rv[4 ], xs[4 ], ys[4 ];
int idx;
struct lpc32xx_tsc *tsc = dev_id;
struct input_dev *input = tsc->dev;
tmp = tsc_readl(tsc, LPC32XX_TSC_STAT);
if (tmp & LPC32XX_TSC_STAT_FIFO_OVRRN) {
/* FIFO overflow - throw away samples */
lpc32xx_fifo_clear(tsc);
return IRQ_HANDLED;
}
/*
* Gather and normalize 4 samples . Pen - up events may have less
* than 4 samples , but its ok to pop 4 and let the last sample
* pen status check drop the samples .
*/
idx = 0 ;
while (idx < 4 &&
!(tsc_readl(tsc, LPC32XX_TSC_STAT) &
LPC32XX_TSC_STAT_FIFO_EMPTY)) {
tmp = tsc_readl(tsc, LPC32XX_TSC_FIFO);
xs[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK -
LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(tmp);
ys[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK -
LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(tmp);
rv[idx] = tmp;
idx++;
}
/* Data is only valid if pen is still down in last sample */
if (!(rv[3 ] & LPC32XX_TSC_FIFO_TS_P_LEVEL) && idx == 4 ) {
/* Use average of 2nd and 3rd sample for position */
input_report_abs(input, ABS_X, (xs[1 ] + xs[2 ]) / 2 );
input_report_abs(input, ABS_Y, (ys[1 ] + ys[2 ]) / 2 );
input_report_key(input, BTN_TOUCH, 1 );
} else {
input_report_key(input, BTN_TOUCH, 0 );
}
input_sync(input);
return IRQ_HANDLED;
}
static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc)
{
/* Disable auto mode */
tsc_writel(tsc, LPC32XX_TSC_CON,
tsc_readl(tsc, LPC32XX_TSC_CON) &
~LPC32XX_TSC_ADCCON_AUTO_EN);
clk_disable_unprepare(tsc->clk);
}
static int lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc)
{
u32 tmp;
int err;
err = clk_prepare_enable(tsc->clk);
if (err)
return err;
tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP;
/* Set the TSC FIFO depth to 4 samples @ 10-bits per sample (max) */
tmp = LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 |
LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(10 ) |
LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(10 );
tsc_writel(tsc, LPC32XX_TSC_CON, tmp);
/* These values are all preset */
tsc_writel(tsc, LPC32XX_TSC_SEL, LPC32XX_TSC_SEL_DEFVAL);
tsc_writel(tsc, LPC32XX_TSC_MIN_X, LPC32XX_TSC_MIN_XY_VAL);
tsc_writel(tsc, LPC32XX_TSC_MAX_X, LPC32XX_TSC_MAX_XY_VAL);
tsc_writel(tsc, LPC32XX_TSC_MIN_Y, LPC32XX_TSC_MIN_XY_VAL);
tsc_writel(tsc, LPC32XX_TSC_MAX_Y, LPC32XX_TSC_MAX_XY_VAL);
/* Aux support is not used */
tsc_writel(tsc, LPC32XX_TSC_AUX_UTR, 0 );
tsc_writel(tsc, LPC32XX_TSC_AUX_MIN, 0 );
tsc_writel(tsc, LPC32XX_TSC_AUX_MAX, 0 );
/*
* Set sample rate to about 240 Hz per X / Y pair . A single measurement
* consists of 4 pairs which gives about a 60 Hz sample rate based on
* a stable 32768 Hz clock source . Values are in clocks .
* Rate is ( 32768 / ( RTR + XCONV + RTR + YCONV + DXP + TTR + UTR ) / 4
*/
tsc_writel(tsc, LPC32XX_TSC_RTR, 0 x2);
tsc_writel(tsc, LPC32XX_TSC_DTR, 0 x2);
tsc_writel(tsc, LPC32XX_TSC_TTR, 0 x10);
tsc_writel(tsc, LPC32XX_TSC_DXP, 0 x4);
tsc_writel(tsc, LPC32XX_TSC_UTR, 88 );
lpc32xx_fifo_clear(tsc);
/* Enable automatic ts event capture */
tsc_writel(tsc, LPC32XX_TSC_CON, tmp | LPC32XX_TSC_ADCCON_AUTO_EN);
return 0 ;
}
static int lpc32xx_ts_open(struct input_dev *dev)
{
struct lpc32xx_tsc *tsc = input_get_drvdata(dev);
return lpc32xx_setup_tsc(tsc);
}
static void lpc32xx_ts_close(struct input_dev *dev)
{
struct lpc32xx_tsc *tsc = input_get_drvdata(dev);
lpc32xx_stop_tsc(tsc);
}
static int lpc32xx_ts_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct lpc32xx_tsc *tsc;
struct input_dev *input;
int irq;
int error;
irq = platform_get_irq(pdev, 0 );
if (irq < 0 )
return irq;
tsc = devm_kzalloc(dev, sizeof (*tsc), GFP_KERNEL);
if (!tsc)
return -ENOMEM;
tsc->irq = irq;
tsc->tsc_base = devm_platform_ioremap_resource(pdev, 0 );
if (IS_ERR(tsc->tsc_base))
return PTR_ERR(tsc->tsc_base);
tsc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(tsc->clk)) {
dev_err(&pdev->dev, "failed getting clock\n" );
return PTR_ERR(tsc->clk);
}
input = devm_input_allocate_device(dev);
if (!input) {
dev_err(&pdev->dev, "failed allocating input device\n" );
return -ENOMEM;
}
input->name = MOD_NAME;
input->phys = "lpc32xx/input0" ;
input->id.bustype = BUS_HOST;
input->id.vendor = 0 x0001;
input->id.product = 0 x0002;
input->id.version = 0 x0100;
input->open = lpc32xx_ts_open;
input->close = lpc32xx_ts_close;
input_set_capability(input, EV_KEY, BTN_TOUCH);
input_set_abs_params(input, ABS_X, LPC32XX_TSC_MIN_XY_VAL,
LPC32XX_TSC_MAX_XY_VAL, 0 , 0 );
input_set_abs_params(input, ABS_Y, LPC32XX_TSC_MIN_XY_VAL,
LPC32XX_TSC_MAX_XY_VAL, 0 , 0 );
input_set_drvdata(input, tsc);
tsc->dev = input;
error = devm_request_irq(dev, tsc->irq, lpc32xx_ts_interrupt,
0 , pdev->name, tsc);
if (error) {
dev_err(&pdev->dev, "failed requesting interrupt\n" );
return error;
}
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "failed registering input device\n" );
return error;
}
platform_set_drvdata(pdev, tsc);
device_init_wakeup(&pdev->dev, true );
return 0 ;
}
#ifdef CONFIG_PM
static int lpc32xx_ts_suspend(struct device *dev)
{
struct lpc32xx_tsc *tsc = dev_get_drvdata(dev);
struct input_dev *input = tsc->dev;
/*
* Suspend and resume can be called when the device hasn ' t been
* enabled . If there are no users that have the device open , then
* avoid calling the TSC stop and start functions as the TSC
* isn ' t yet clocked .
*/
mutex_lock(&input->mutex);
if (input_device_enabled(input)) {
if (device_may_wakeup(dev))
enable_irq_wake(tsc->irq);
else
lpc32xx_stop_tsc(tsc);
}
mutex_unlock(&input->mutex);
return 0 ;
}
static int lpc32xx_ts_resume(struct device *dev)
{
struct lpc32xx_tsc *tsc = dev_get_drvdata(dev);
struct input_dev *input = tsc->dev;
mutex_lock(&input->mutex);
if (input_device_enabled(input)) {
if (device_may_wakeup(dev))
disable_irq_wake(tsc->irq);
else
lpc32xx_setup_tsc(tsc);
}
mutex_unlock(&input->mutex);
return 0 ;
}
static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
.suspend = lpc32xx_ts_suspend,
.resume = lpc32xx_ts_resume,
};
#define LPC32XX_TS_PM_OPS (&lpc32xx_ts_pm_ops)
#else
#define LPC32XX_TS_PM_OPS NULL
#endif
#ifdef CONFIG_OF
static const struct of_device_id lpc32xx_tsc_of_match[] = {
{ .compatible = "nxp,lpc3220-tsc" , },
{ },
};
MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match);
#endif
static struct platform_driver lpc32xx_ts_driver = {
.probe = lpc32xx_ts_probe,
.driver = {
.name = MOD_NAME,
.pm = LPC32XX_TS_PM_OPS,
.of_match_table = of_match_ptr(lpc32xx_tsc_of_match),
},
};
module_platform_driver(lpc32xx_ts_driver);
MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com" );
MODULE_DESCRIPTION("LPC32XX TSC Driver" );
MODULE_LICENSE("GPL" );
MODULE_ALIAS("platform:lpc32xx_ts" );
Messung V0.5 in Prozent C=96 H=96 G=95
¤ Dauer der Verarbeitung: 0.12 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland