// SPDX-License-Identifier: GPL-2.0-only
/*
* OLPC HGPK ( XO - 1 ) touchpad PS / 2 mouse driver
*
* Copyright ( c ) 2006 - 2008 One Laptop Per Child
* Authors :
* Zephaniah E . Hull
* Andres Salomon < dilinger @ debian . org >
*
* This driver is partly based on the ALPS driver , which is :
*
* Copyright ( c ) 2003 Neil Brown < neilb @ cse . unsw . edu . au >
* Copyright ( c ) 2003 - 2005 Peter Osterlund < petero2 @ telia . com >
* Copyright ( c ) 2004 Dmitry Torokhov < dtor @ mail . ru >
* Copyright ( c ) 2005 Vojtech Pavlik < vojtech @ suse . cz >
*/
/*
* The spec from ALPS is available from
* < http : //wiki.laptop.org/go/Touch_Pad/Tablet>. It refers to this
* device as HGPK ( Hybrid GS , PT , and Keymatrix ) .
*
* The earliest versions of the device had simultaneous reporting ; that
* was removed . After that , the device used the Advanced Mode GS / PT streaming
* stuff . That turned out to be too buggy to support , so we ' ve finally
* switched to Mouse Mode ( which utilizes only the center 1 / 3 of the touchpad ) .
*/
#define DEBUG
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/delay.h>
#include <asm /olpc.h>
#include "psmouse.h"
#include "hgpk.h"
#define ILLEGAL_XY 999999
static bool tpdebug;
module_param(tpdebug, bool , 0644 );
MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG." );
static int recalib_delta = 100 ;
module_param(recalib_delta, int , 0644 );
MODULE_PARM_DESC(recalib_delta,
"packets containing a delta this large will be discarded, and a "
"recalibration may be scheduled." );
static int jumpy_delay = 20 ;
module_param(jumpy_delay, int , 0644 );
MODULE_PARM_DESC(jumpy_delay,
"delay (ms) before recal after jumpiness detected" );
static int spew_delay = 1 ;
module_param(spew_delay, int , 0644 );
MODULE_PARM_DESC(spew_delay,
"delay (ms) before recal after packet spew detected" );
static int recal_guard_time;
module_param(recal_guard_time, int , 0644 );
MODULE_PARM_DESC(recal_guard_time,
"interval (ms) during which recal will be restarted if packet received" );
static int post_interrupt_delay = 40 ;
module_param(post_interrupt_delay, int , 0644 );
MODULE_PARM_DESC(post_interrupt_delay,
"delay (ms) before recal after recal interrupt detected" );
static bool autorecal = true ;
module_param(autorecal, bool , 0644 );
MODULE_PARM_DESC(autorecal, "enable recalibration in the driver" );
static char hgpk_mode_name[16 ];
module_param_string(hgpk_mode, hgpk_mode_name, sizeof (hgpk_mode_name), 0644 );
MODULE_PARM_DESC(hgpk_mode,
"default hgpk mode: mouse, glidesensor or pentablet" );
static int hgpk_default_mode = HGPK_MODE_MOUSE;
static const char * const hgpk_mode_names[] = {
[HGPK_MODE_MOUSE] = "Mouse" ,
[HGPK_MODE_GLIDESENSOR] = "GlideSensor" ,
[HGPK_MODE_PENTABLET] = "PenTablet" ,
};
static int hgpk_mode_from_name(const char *buf, int len)
{
int i;
for (i = 0 ; i < ARRAY_SIZE(hgpk_mode_names); i++) {
const char *name = hgpk_mode_names[i];
if (strlen(name) == len && !strncasecmp(name, buf, len))
return i;
}
return HGPK_MODE_INVALID;
}
/*
* see if new value is within 20 % of half of old value
*/
static int approx_half(int curr, int prev)
{
int belowhalf, abovehalf;
if (curr < 5 || prev < 5 )
return 0 ;
belowhalf = (prev * 8 ) / 20 ;
abovehalf = (prev * 12 ) / 20 ;
return belowhalf < curr && curr <= abovehalf;
}
/*
* Throw out oddly large delta packets , and any that immediately follow whose
* values are each approximately half of the previous . It seems that the ALPS
* firmware emits errant packets , and they get averaged out slowly .
*/
static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y)
{
struct hgpk_data *priv = psmouse->private ;
int avx, avy;
bool do_recal = false ;
avx = abs(x);
avy = abs(y);
/* discard if too big, or half that but > 4 times the prev delta */
if (avx > recalib_delta ||
(avx > recalib_delta / 2 && ((avx / 4 ) > priv->xlast))) {
psmouse_warn(psmouse, "detected %dpx jump in x\n" , x);
priv->xbigj = avx;
} else if (approx_half(avx, priv->xbigj)) {
psmouse_warn(psmouse, "detected secondary %dpx jump in x\n" , x);
priv->xbigj = avx;
priv->xsaw_secondary++;
} else {
if (priv->xbigj && priv->xsaw_secondary > 1 )
do_recal = true ;
priv->xbigj = 0 ;
priv->xsaw_secondary = 0 ;
}
if (avy > recalib_delta ||
(avy > recalib_delta / 2 && ((avy / 4 ) > priv->ylast))) {
psmouse_warn(psmouse, "detected %dpx jump in y\n" , y);
priv->ybigj = avy;
} else if (approx_half(avy, priv->ybigj)) {
psmouse_warn(psmouse, "detected secondary %dpx jump in y\n" , y);
priv->ybigj = avy;
priv->ysaw_secondary++;
} else {
if (priv->ybigj && priv->ysaw_secondary > 1 )
do_recal = true ;
priv->ybigj = 0 ;
priv->ysaw_secondary = 0 ;
}
priv->xlast = avx;
priv->ylast = avy;
if (do_recal && jumpy_delay) {
psmouse_warn(psmouse, "scheduling recalibration\n" );
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(jumpy_delay));
}
return priv->xbigj || priv->ybigj;
}
static void hgpk_reset_spew_detection(struct hgpk_data *priv)
{
priv->spew_count = 0 ;
priv->dupe_count = 0 ;
priv->x_tally = 0 ;
priv->y_tally = 0 ;
priv->spew_flag = NO_SPEW;
}
static void hgpk_reset_hack_state(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
priv->abs_x = priv->abs_y = -1 ;
priv->xlast = priv->ylast = ILLEGAL_XY;
priv->xbigj = priv->ybigj = 0 ;
priv->xsaw_secondary = priv->ysaw_secondary = 0 ;
hgpk_reset_spew_detection(priv);
}
/*
* We have no idea why this particular hardware bug occurs . The touchpad
* will randomly start spewing packets without anything touching the
* pad . This wouldn ' t necessarily be bad , but it ' s indicative of a
* severely miscalibrated pad ; attempting to use the touchpad while it ' s
* spewing means the cursor will jump all over the place , and act " drunk " .
*
* The packets that are spewed tend to all have deltas between - 2 and 2 , and
* the cursor will move around without really going very far . It will
* tend to end up in the same location ; if we tally up the changes over
* 100 packets , we end up w / a final delta of close to 0 . This happens
* pretty regularly when the touchpad is spewing , and is pretty hard to
* manually trigger ( at least for * my * fingers ) . So , it makes a perfect
* scheme for detecting spews .
*/
static void hgpk_spewing_hack(struct psmouse *psmouse,
int l, int r, int x, int y)
{
struct hgpk_data *priv = psmouse->private ;
/* ignore button press packets; many in a row could trigger
* a false-positive! */
if (l || r)
return ;
/* don't track spew if the workaround feature has been turned off */
if (!spew_delay)
return ;
if (abs(x) > 3 || abs(y) > 3 ) {
/* no spew, or spew ended */
hgpk_reset_spew_detection(priv);
return ;
}
/* Keep a tally of the overall delta to the cursor position caused by
* the spew */
priv->x_tally += x;
priv->y_tally += y;
switch (priv->spew_flag) {
case NO_SPEW:
/* we're not spewing, but this packet might be the start */
priv->spew_flag = MAYBE_SPEWING;
fallthrough;
case MAYBE_SPEWING:
priv->spew_count++;
if (priv->spew_count < SPEW_WATCH_COUNT)
break ;
/* excessive spew detected, request recalibration */
priv->spew_flag = SPEW_DETECTED;
fallthrough;
case SPEW_DETECTED:
/* only recalibrate when the overall delta to the cursor
* is really small . if the spew is causing significant cursor
* movement , it is probably a case of the user moving the
* cursor very slowly across the screen. */
if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3 ) {
psmouse_warn(psmouse, "packet spew detected (%d,%d)\n" ,
priv->x_tally, priv->y_tally);
priv->spew_flag = RECALIBRATING;
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(spew_delay));
}
break ;
case RECALIBRATING:
/* we already detected a spew and requested a recalibration,
* just wait for the queue to kick into action. */
break ;
}
}
/*
* HGPK Mouse Mode format ( standard mouse format , sans middle button )
*
* byte 0 : y - over x - over y - neg x - neg 1 0 swr swl
* byte 1 : x7 x6 x5 x4 x3 x2 x1 x0
* byte 2 : y7 y6 y5 y4 y3 y2 y1 y0
*
* swr / swl are the left / right buttons .
* x - neg / y - neg are the x and y delta negative bits
* x - over / y - over are the x and y overflow bits
*
* - - -
*
* HGPK Advanced Mode - single - mode format
*
* byte 0 ( PT ) : 1 1 0 0 1 1 1 1
* byte 0 ( GS ) : 1 1 1 1 1 1 1 1
* byte 1 : 0 x6 x5 x4 x3 x2 x1 x0
* byte 2 ( PT ) : 0 0 x9 x8 x7 ? pt - dsw 0
* byte 2 ( GS ) : 0 x10 x9 x8 x7 ? gs - dsw pt - dsw
* byte 3 : 0 y9 y8 y7 1 0 swr swl
* byte 4 : 0 y6 y5 y4 y3 y2 y1 y0
* byte 5 : 0 z6 z5 z4 z3 z2 z1 z0
*
* ? ' s are not defined in the protocol spec , may vary between models .
*
* swr / swl are the left / right buttons .
*
* pt - dsw / gs - dsw indicate that the pt / gs sensor is detecting a
* pen / finger
*/
static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet)
{
struct hgpk_data *priv = psmouse->private ;
int pktcnt = psmouse->pktcnt;
bool valid;
switch (priv->mode) {
case HGPK_MODE_MOUSE:
valid = (packet[0 ] & 0 x0C) == 0 x08;
break ;
case HGPK_MODE_GLIDESENSOR:
valid = pktcnt == 1 ?
packet[0 ] == HGPK_GS : !(packet[pktcnt - 1 ] & 0 x80);
break ;
case HGPK_MODE_PENTABLET:
valid = pktcnt == 1 ?
packet[0 ] == HGPK_PT : !(packet[pktcnt - 1 ] & 0 x80);
break ;
default :
valid = false ;
break ;
}
if (!valid)
psmouse_dbg(psmouse,
"bad data, mode %d (%d) %*ph\n" ,
priv->mode, pktcnt, 6 , psmouse->packet);
return valid;
}
static void hgpk_process_advanced_packet(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
struct input_dev *idev = psmouse->dev;
unsigned char *packet = psmouse->packet;
int down = !!(packet[2 ] & 2 );
int left = !!(packet[3 ] & 1 );
int right = !!(packet[3 ] & 2 );
int x = packet[1 ] | ((packet[2 ] & 0 x78) << 4 );
int y = packet[4 ] | ((packet[3 ] & 0 x70) << 3 );
if (priv->mode == HGPK_MODE_GLIDESENSOR) {
int pt_down = !!(packet[2 ] & 1 );
int finger_down = !!(packet[2 ] & 2 );
int z = packet[5 ];
input_report_abs(idev, ABS_PRESSURE, z);
if (tpdebug)
psmouse_dbg(psmouse, "pd=%d fd=%d z=%d" ,
pt_down, finger_down, z);
} else {
/*
* PenTablet mode does not report pressure , so we don ' t
* report it here
*/
if (tpdebug)
psmouse_dbg(psmouse, "pd=%d " , down);
}
if (tpdebug)
psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n" ,
left, right, x, y);
input_report_key(idev, BTN_TOUCH, down);
input_report_key(idev, BTN_LEFT, left);
input_report_key(idev, BTN_RIGHT, right);
/*
* If this packet says that the finger was removed , reset our position
* tracking so that we don ' t erroneously detect a jump on next press .
*/
if (!down) {
hgpk_reset_hack_state(psmouse);
goto done;
}
/*
* Weed out duplicate packets ( we get quite a few , and they mess up
* our jump detection )
*/
if (x == priv->abs_x && y == priv->abs_y) {
if (++priv->dupe_count > SPEW_WATCH_COUNT) {
if (tpdebug)
psmouse_dbg(psmouse, "hard spew detected\n" );
priv->spew_flag = RECALIBRATING;
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(spew_delay));
}
goto done;
}
/* not a duplicate, continue with position reporting */
priv->dupe_count = 0 ;
/* Don't apply hacks in PT mode, it seems reliable */
if (priv->mode != HGPK_MODE_PENTABLET && priv->abs_x != -1 ) {
int x_diff = priv->abs_x - x;
int y_diff = priv->abs_y - y;
if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) {
if (tpdebug)
psmouse_dbg(psmouse, "discarding\n" );
goto done;
}
hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff);
}
input_report_abs(idev, ABS_X, x);
input_report_abs(idev, ABS_Y, y);
priv->abs_x = x;
priv->abs_y = y;
done:
input_sync(idev);
}
static void hgpk_process_simple_packet(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
int left = packet[0 ] & 1 ;
int right = (packet[0 ] >> 1 ) & 1 ;
int x = packet[1 ] - ((packet[0 ] << 4 ) & 0 x100);
int y = ((packet[0 ] << 3 ) & 0 x100) - packet[2 ];
if (packet[0 ] & 0 xc0)
psmouse_dbg(psmouse,
"overflow -- 0x%02x 0x%02x 0x%02x\n" ,
packet[0 ], packet[1 ], packet[2 ]);
if (hgpk_discard_decay_hack(psmouse, x, y)) {
if (tpdebug)
psmouse_dbg(psmouse, "discarding\n" );
return ;
}
hgpk_spewing_hack(psmouse, left, right, x, y);
if (tpdebug)
psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n" ,
left, right, x, y);
input_report_key(dev, BTN_LEFT, left);
input_report_key(dev, BTN_RIGHT, right);
input_report_rel(dev, REL_X, x);
input_report_rel(dev, REL_Y, y);
input_sync(dev);
}
static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
if (!hgpk_is_byte_valid(psmouse, psmouse->packet))
return PSMOUSE_BAD_DATA;
if (psmouse->pktcnt >= psmouse->pktsize) {
if (priv->mode == HGPK_MODE_MOUSE)
hgpk_process_simple_packet(psmouse);
else
hgpk_process_advanced_packet(psmouse);
return PSMOUSE_FULL_PACKET;
}
if (priv->recalib_window) {
if (time_before(jiffies, priv->recalib_window)) {
/*
* ugh , got a packet inside our recalibration
* window , schedule another recalibration .
*/
psmouse_dbg(psmouse,
"packet inside calibration window, queueing another recalibration\n" );
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(post_interrupt_delay));
}
priv->recalib_window = 0 ;
}
return PSMOUSE_GOOD_DATA;
}
static int hgpk_select_mode(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
struct hgpk_data *priv = psmouse->private ;
int i;
int cmd;
/*
* 4 disables to enable advanced mode
* then 3 0 xf2 bytes as the preamble for GS / PT selection
*/
const int advanced_init[] = {
PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
0 xf2, 0 xf2, 0 xf2,
};
switch (priv->mode) {
case HGPK_MODE_MOUSE:
psmouse->pktsize = 3 ;
break ;
case HGPK_MODE_GLIDESENSOR:
case HGPK_MODE_PENTABLET:
psmouse->pktsize = 6 ;
/* Switch to 'Advanced mode.', four disables in a row. */
for (i = 0 ; i < ARRAY_SIZE(advanced_init); i++)
if (ps2_command(ps2dev, NULL, advanced_init[i]))
return -EIO;
/* select between GlideSensor (mouse) or PenTablet */
cmd = priv->mode == HGPK_MODE_GLIDESENSOR ?
PSMOUSE_CMD_SETSCALE11 : PSMOUSE_CMD_SETSCALE21;
if (ps2_command(ps2dev, NULL, cmd))
return -EIO;
break ;
default :
return -EINVAL;
}
return 0 ;
}
static void hgpk_setup_input_device(struct input_dev *input,
struct input_dev *old_input,
enum hgpk_mode mode)
{
if (old_input) {
input->name = old_input->name;
input->phys = old_input->phys;
input->id = old_input->id;
input->dev.parent = old_input->dev.parent;
}
memset(input->evbit, 0 , sizeof (input->evbit));
memset(input->relbit, 0 , sizeof (input->relbit));
memset(input->keybit, 0 , sizeof (input->keybit));
/* All modes report left and right buttons */
__set_bit(EV_KEY, input->evbit);
__set_bit(BTN_LEFT, input->keybit);
__set_bit(BTN_RIGHT, input->keybit);
switch (mode) {
case HGPK_MODE_MOUSE:
__set_bit(EV_REL, input->evbit);
__set_bit(REL_X, input->relbit);
__set_bit(REL_Y, input->relbit);
break ;
case HGPK_MODE_GLIDESENSOR:
__set_bit(BTN_TOUCH, input->keybit);
__set_bit(BTN_TOOL_FINGER, input->keybit);
__set_bit(EV_ABS, input->evbit);
/* GlideSensor has pressure sensor, PenTablet does not */
input_set_abs_params(input, ABS_PRESSURE, 0 , 15 , 0 , 0 );
/* From device specs */
input_set_abs_params(input, ABS_X, 0 , 399 , 0 , 0 );
input_set_abs_params(input, ABS_Y, 0 , 290 , 0 , 0 );
/* Calculated by hand based on usable size (52mm x 38mm) */
input_abs_set_res(input, ABS_X, 8 );
input_abs_set_res(input, ABS_Y, 8 );
break ;
case HGPK_MODE_PENTABLET:
__set_bit(BTN_TOUCH, input->keybit);
__set_bit(BTN_TOOL_FINGER, input->keybit);
__set_bit(EV_ABS, input->evbit);
/* From device specs */
input_set_abs_params(input, ABS_X, 0 , 999 , 0 , 0 );
input_set_abs_params(input, ABS_Y, 5 , 239 , 0 , 0 );
/* Calculated by hand based on usable size (156mm x 38mm) */
input_abs_set_res(input, ABS_X, 6 );
input_abs_set_res(input, ABS_Y, 8 );
break ;
default :
BUG();
}
}
static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate)
{
int err;
psmouse_reset(psmouse);
if (recalibrate) {
struct ps2dev *ps2dev = &psmouse->ps2dev;
/* send the recalibrate request */
if (ps2_command(ps2dev, NULL, 0 xf5) ||
ps2_command(ps2dev, NULL, 0 xf5) ||
ps2_command(ps2dev, NULL, 0 xe6) ||
ps2_command(ps2dev, NULL, 0 xf5)) {
return -1 ;
}
/* according to ALPS, 150mS is required for recalibration */
msleep(150 );
}
err = hgpk_select_mode(psmouse);
if (err) {
psmouse_err(psmouse, "failed to select mode\n" );
return err;
}
hgpk_reset_hack_state(psmouse);
return 0 ;
}
static int hgpk_force_recalibrate(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
int err;
/* C-series touchpads added the recalibrate command */
if (psmouse->model < HGPK_MODEL_C)
return 0 ;
if (!autorecal) {
psmouse_dbg(psmouse, "recalibration disabled, ignoring\n" );
return 0 ;
}
psmouse_dbg(psmouse, "recalibrating touchpad..\n" );
/* we don't want to race with the irq handler, nor with resyncs */
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
/* start by resetting the device */
err = hgpk_reset_device(psmouse, true );
if (err)
return err;
/*
* XXX : If a finger is down during this delay , recalibration will
* detect capacitance incorrectly . This is a hardware bug , and
* we don ' t have a good way to deal with it . The 2 s window stuff
* ( below ) is our best option for now .
*/
if (psmouse_activate(psmouse))
return -1 ;
if (tpdebug)
psmouse_dbg(psmouse, "touchpad reactivated\n" );
/*
* If we get packets right away after recalibrating , it ' s likely
* that a finger was on the touchpad . If so , it ' s probably
* miscalibrated , so we optionally schedule another .
*/
if (recal_guard_time)
priv->recalib_window = jiffies +
msecs_to_jiffies(recal_guard_time);
return 0 ;
}
/*
* This puts the touchpad in a power saving mode ; according to ALPS , current
* consumption goes down to 50 uA after running this . To turn power back on ,
* we drive MS - DAT low . Measuring with a 1 mA resolution ammeter says that
* the current on the SUS_3 . 3 V rail drops from 3 mA or 4 mA to 0 when we do this .
*
* We have no formal spec that details this operation - - the low - power
* sequence came from a long - lost email trail .
*/
static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
int timeo;
int err;
/* Added on D-series touchpads */
if (psmouse->model < HGPK_MODEL_D)
return 0 ;
if (enable) {
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
/*
* Sending a byte will drive MS - DAT low ; this will wake up
* the controller . Once we get an ACK back from it , it
* means we can continue with the touchpad re - init . ALPS
* tells us that 1 s should be long enough , so set that as
* the upper bound . ( in practice , it takes about 3 loops . )
*/
for (timeo = 20 ; timeo > 0 ; timeo--) {
if (!ps2_sendbyte(ps2dev, PSMOUSE_CMD_DISABLE, 20 ))
break ;
msleep(25 );
}
err = hgpk_reset_device(psmouse, false );
if (err) {
psmouse_err(psmouse, "Failed to reset device!\n" );
return err;
}
/* should be all set, enable the touchpad */
psmouse_activate(psmouse);
psmouse_dbg(psmouse, "Touchpad powered up.\n" );
} else {
psmouse_dbg(psmouse, "Powering off touchpad.\n" );
if (ps2_command(ps2dev, NULL, 0 xec) ||
ps2_command(ps2dev, NULL, 0 xec) ||
ps2_command(ps2dev, NULL, 0 xea)) {
return -1 ;
}
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
/* probably won't see an ACK, the touchpad will be off */
ps2_sendbyte(ps2dev, 0 xec, 20 );
}
return 0 ;
}
static int hgpk_poll(struct psmouse *psmouse)
{
/* We can't poll, so always return failure. */
return -1 ;
}
static int hgpk_reconnect(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
/*
* During suspend / resume the ps2 rails remain powered . We don ' t want
* to do a reset because it ' s flush data out of buffers ; however ,
* earlier prototypes ( B1 ) had some brokenness that required a reset .
*/
if (olpc_board_at_least(olpc_board(0 xb2)))
if (psmouse->ps2dev.serio->dev.power.power_state.event !=
PM_EVENT_ON)
return 0 ;
priv->powered = 1 ;
return hgpk_reset_device(psmouse, false );
}
static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf)
{
struct hgpk_data *priv = psmouse->private ;
return sprintf(buf, "%d\n" , priv->powered);
}
static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
struct hgpk_data *priv = psmouse->private ;
unsigned int value;
int err;
err = kstrtouint(buf, 10 , &value);
if (err)
return err;
if (value > 1 )
return -EINVAL;
if (value != priv->powered) {
/*
* hgpk_toggle_power will deal w / state so
* we ' re not racing w / irq
*/
err = hgpk_toggle_powersave(psmouse, value);
if (!err)
priv->powered = value;
}
return err ? err : count;
}
__PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL,
hgpk_show_powered, hgpk_set_powered, false );
static ssize_t attr_show_mode(struct psmouse *psmouse, void *data, char *buf)
{
struct hgpk_data *priv = psmouse->private ;
return sprintf(buf, "%s\n" , hgpk_mode_names[priv->mode]);
}
static ssize_t attr_set_mode(struct psmouse *psmouse, void *data,
const char *buf, size_t len)
{
struct hgpk_data *priv = psmouse->private ;
enum hgpk_mode old_mode = priv->mode;
enum hgpk_mode new_mode = hgpk_mode_from_name(buf, len);
struct input_dev *old_dev = psmouse->dev;
struct input_dev *new_dev;
int err;
if (new_mode == HGPK_MODE_INVALID)
return -EINVAL;
if (old_mode == new_mode)
return len;
new_dev = input_allocate_device();
if (!new_dev)
return -ENOMEM;
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
/* Switch device into the new mode */
priv->mode = new_mode;
err = hgpk_reset_device(psmouse, false );
if (err)
goto err_try_restore;
hgpk_setup_input_device(new_dev, old_dev, new_mode);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
err = input_register_device(new_dev);
if (err)
goto err_try_restore;
psmouse->dev = new_dev;
input_unregister_device(old_dev);
return len;
err_try_restore:
input_free_device(new_dev);
priv->mode = old_mode;
hgpk_reset_device(psmouse, false );
return err;
}
PSMOUSE_DEFINE_ATTR(hgpk_mode, S_IWUSR | S_IRUGO, NULL,
attr_show_mode, attr_set_mode);
static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse,
void *data, char *buf)
{
return -EINVAL;
}
static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
struct hgpk_data *priv = psmouse->private ;
unsigned int value;
int err;
err = kstrtouint(buf, 10 , &value);
if (err)
return err;
if (value != 1 )
return -EINVAL;
/*
* We queue work instead of doing recalibration right here
* to avoid adding locking to hgpk_force_recalibrate ( )
* since workqueue provides serialization .
*/
psmouse_queue_work(psmouse, &priv->recalib_wq, 0 );
return count;
}
__PSMOUSE_DEFINE_ATTR(recalibrate, S_IWUSR | S_IRUGO, NULL,
hgpk_trigger_recal_show, hgpk_trigger_recal, false );
static void hgpk_disconnect(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
device_remove_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_powered.dattr);
device_remove_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_hgpk_mode.dattr);
if (psmouse->model >= HGPK_MODEL_C)
device_remove_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_recalibrate.dattr);
psmouse_reset(psmouse);
kfree(priv);
}
static void hgpk_recalib_work(struct work_struct *work)
{
struct delayed_work *w = to_delayed_work(work);
struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
struct psmouse *psmouse = priv->psmouse;
if (hgpk_force_recalibrate(psmouse))
psmouse_err(psmouse, "recalibration failed!\n" );
}
static int hgpk_register(struct psmouse *psmouse)
{
struct hgpk_data *priv = psmouse->private ;
int err;
/* register handlers */
psmouse->protocol_handler = hgpk_process_byte;
psmouse->poll = hgpk_poll;
psmouse->disconnect = hgpk_disconnect;
psmouse->reconnect = hgpk_reconnect;
/* Disable the idle resync. */
psmouse->resync_time = 0 ;
/* Reset after a lot of bad bytes. */
psmouse->resetafter = 1024 ;
hgpk_setup_input_device(psmouse->dev, NULL, priv->mode);
err = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_powered.dattr);
if (err) {
psmouse_err(psmouse, "Failed creating 'powered' sysfs node\n" );
return err;
}
err = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_hgpk_mode.dattr);
if (err) {
psmouse_err(psmouse,
"Failed creating 'hgpk_mode' sysfs node\n" );
goto err_remove_powered;
}
/* C-series touchpads added the recalibrate command */
if (psmouse->model >= HGPK_MODEL_C) {
err = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_recalibrate.dattr);
if (err) {
psmouse_err(psmouse,
"Failed creating 'recalibrate' sysfs node\n" );
goto err_remove_mode;
}
}
return 0 ;
err_remove_mode:
device_remove_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_hgpk_mode.dattr);
err_remove_powered:
device_remove_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_powered.dattr);
return err;
}
int hgpk_init(struct psmouse *psmouse)
{
struct hgpk_data *priv;
int err;
priv = kzalloc(sizeof (*priv), GFP_KERNEL);
if (!priv) {
err = -ENOMEM;
goto alloc_fail;
}
psmouse->private = priv;
priv->psmouse = psmouse;
priv->powered = true ;
priv->mode = hgpk_default_mode;
INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
err = hgpk_reset_device(psmouse, false );
if (err)
goto init_fail;
err = hgpk_register(psmouse);
if (err)
goto init_fail;
return 0 ;
init_fail:
kfree(priv);
alloc_fail:
return err;
}
static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[3 ];
/* E7, E7, E7, E9 gets us a 3 byte identifier */
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
return -EIO;
}
psmouse_dbg(psmouse, "ID: %*ph\n" , 3 , param);
/* HGPK signature: 0x67, 0x00, 0x<model> */
if (param[0 ] != 0 x67 || param[1 ] != 0 x00)
return -ENODEV;
psmouse_info(psmouse, "OLPC touchpad revision 0x%x\n" , param[2 ]);
return param[2 ];
}
int hgpk_detect(struct psmouse *psmouse, bool set_properties)
{
int version;
version = hgpk_get_model(psmouse);
if (version < 0 )
return version;
if (set_properties) {
psmouse->vendor = "ALPS" ;
psmouse->name = "HGPK" ;
psmouse->model = version;
}
return 0 ;
}
void hgpk_module_init(void )
{
hgpk_default_mode = hgpk_mode_from_name(hgpk_mode_name,
strlen(hgpk_mode_name));
if (hgpk_default_mode == HGPK_MODE_INVALID) {
hgpk_default_mode = HGPK_MODE_MOUSE;
strscpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE],
sizeof (hgpk_mode_name));
}
}
Messung V0.5 in Prozent C=96 H=96 G=95
¤ Dauer der Verarbeitung: 0.19 Sekunden
(vorverarbeitet am 2026-09-28)
¤
*© Formatika GbR, Deutschland