// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright ( c ) 2021 Raffaele Tranquillini < raffaele . tranquillini @ gmail . com >
*
* Generated using linux - mdss - dsi - panel - driver - generator from Lineage OS device tree :
* https : //github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/arch/arm/boot/dts/qcom/a1-msm8996-mtp.dtsi
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
struct jdi_fhd_r63452 {
struct drm_panel panel;
struct mipi_dsi_device *dsi;
struct gpio_desc *reset_gpio;
};
static inline struct jdi_fhd_r63452 *to_jdi_fhd_r63452(struct drm_panel *panel)
{
return container_of(panel, struct jdi_fhd_r63452, panel);
}
static void jdi_fhd_r63452_reset(struct jdi_fhd_r63452 *ctx)
{
gpiod_set_value_cansleep(ctx->reset_gpio, 0 );
usleep_range(10000 , 11000 );
gpiod_set_value_cansleep(ctx->reset_gpio, 1 );
usleep_range(1000 , 2000 );
gpiod_set_value_cansleep(ctx->reset_gpio, 0 );
usleep_range(10000 , 11000 );
}
static int jdi_fhd_r63452_on(struct jdi_fhd_r63452 *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xb0, 0 x00);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xd6, 0 x01);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xec,
0 x64, 0 xdc, 0 xec, 0 x3b, 0 x52, 0 x00, 0 x0b, 0 x0b,
0 x13, 0 x15, 0 x68, 0 x0b, 0 xb5);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xb0, 0 x03);
mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_SET_ADDRESS_MODE, 0 x00);
mipi_dsi_dcs_set_pixel_format_multi(&dsi_ctx, 0 x77);
mipi_dsi_dcs_set_column_address_multi(&dsi_ctx, 0 x0000, 0 x0437);
mipi_dsi_dcs_set_page_address_multi(&dsi_ctx, 0 x0000, 0 x077f);
mipi_dsi_dcs_set_tear_scanline_multi(&dsi_ctx, 0 x0000);
mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0 x00ff);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0 x24);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_POWER_SAVE, 0 x00);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_SET_CABC_MIN_BRIGHTNESS, 0 x00);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0 x84, 0 x00);
mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
mipi_dsi_msleep(&dsi_ctx, 20 );
mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
mipi_dsi_msleep(&dsi_ctx, 80 );
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xb0, 0 x04);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0 x84, 0 x00);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xc8, 0 x11);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xb0, 0 x03);
return dsi_ctx.accum_err;
}
static void jdi_fhd_r63452_off(struct jdi_fhd_r63452 *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xb0, 0 x00);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xd6, 0 x01);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xec,
0 x64, 0 xdc, 0 xec, 0 x3b, 0 x52, 0 x00, 0 x0b, 0 x0b,
0 x13, 0 x15, 0 x68, 0 x0b, 0 x95);
mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0 xb0, 0 x03);
mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
mipi_dsi_usleep_range(&dsi_ctx, 2000 , 3000 );
mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
mipi_dsi_msleep(&dsi_ctx, 120 );
}
static int jdi_fhd_r63452_prepare(struct drm_panel *panel)
{
struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel);
int ret;
jdi_fhd_r63452_reset(ctx);
ret = jdi_fhd_r63452_on(ctx);
if (ret < 0 )
gpiod_set_value_cansleep(ctx->reset_gpio, 1 );
return ret;
}
static int jdi_fhd_r63452_unprepare(struct drm_panel *panel)
{
struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel);
/*
* NOTE : We don ' t return an error here as while the panel won ' t have
* been cleanly turned off at least we ' ve asserted the reset signal
* so it should be safe to power it back on again later
*/
jdi_fhd_r63452_off(ctx);
gpiod_set_value_cansleep(ctx->reset_gpio, 1 );
return 0 ;
}
static const struct drm_display_mode jdi_fhd_r63452_mode = {
.clock = (1080 + 120 + 16 + 40 ) * (1920 + 4 + 2 + 4 ) * 60 / 1000 ,
.hdisplay = 1080 ,
.hsync_start = 1080 + 120 ,
.hsync_end = 1080 + 120 + 16 ,
.htotal = 1080 + 120 + 16 + 40 ,
.vdisplay = 1920 ,
.vsync_start = 1920 + 4 ,
.vsync_end = 1920 + 4 + 2 ,
.vtotal = 1920 + 4 + 2 + 4 ,
.width_mm = 64 ,
.height_mm = 114 ,
};
static int jdi_fhd_r63452_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &jdi_fhd_r63452_mode);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1 ;
}
static const struct drm_panel_funcs jdi_fhd_r63452_panel_funcs = {
.prepare = jdi_fhd_r63452_prepare,
.unprepare = jdi_fhd_r63452_unprepare,
.get_modes = jdi_fhd_r63452_get_modes,
};
static int jdi_fhd_r63452_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct jdi_fhd_r63452 *ctx;
int ret;
ctx = devm_drm_panel_alloc(dev, struct jdi_fhd_r63452, panel,
&jdi_fhd_r63452_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
ctx->reset_gpio = devm_gpiod_get(dev, "reset" , GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio))
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
"Failed to get reset-gpios\n" );
ctx->dsi = dsi;
mipi_dsi_set_drvdata(dsi, ctx);
dsi->lanes = 4 ;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_CLOCK_NON_CONTINUOUS;
ctx->panel.prepare_prev_first = true ;
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return dev_err_probe(dev, ret, "Failed to get backlight\n" );
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0 ) {
dev_err(dev, "Failed to attach to DSI host: %d\n" , ret);
return ret;
}
return 0 ;
}
static void jdi_fhd_r63452_remove(struct mipi_dsi_device *dsi)
{
struct jdi_fhd_r63452 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = mipi_dsi_detach(dsi);
if (ret < 0 )
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n" , ret);
drm_panel_remove(&ctx->panel);
}
static const struct of_device_id jdi_fhd_r63452_of_match[] = {
{ .compatible = "jdi,fhd-r63452" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, jdi_fhd_r63452_of_match);
static struct mipi_dsi_driver jdi_fhd_r63452_driver = {
.probe = jdi_fhd_r63452_probe,
.remove = jdi_fhd_r63452_remove,
.driver = {
.name = "panel-jdi-fhd-r63452" ,
.of_match_table = jdi_fhd_r63452_of_match,
},
};
module_mipi_dsi_driver(jdi_fhd_r63452_driver);
MODULE_AUTHOR("Raffaele Tranquillini <raffaele.tranquillini@gmail.com>" );
MODULE_DESCRIPTION("DRM driver for JDI FHD R63452 DSI panel, command mode" );
MODULE_LICENSE("GPL v2" );
Messung V0.5 in Prozent C=97 H=100 G=98
¤ Dauer der Verarbeitung: 0.10 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland