// SPDX-License-Identifier: MIT
/*
* Copyright © 2020 Intel Corporation
*/
#include "i915_drv.h"
#include "i915_reg.h"
#include "intel_gt.h"
#include "intel_gt_clock_utils.h"
#include "intel_gt_print.h"
#include "intel_gt_regs.h"
#include "soc/intel_dram.h"
static u32 read_reference_ts_freq(struct intel_uncore *uncore)
{
u32 ts_override = intel_uncore_read(uncore, GEN9_TIMESTAMP_OVERRIDE);
u32 base_freq, frac_freq;
base_freq = ((ts_override & GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK) >>
GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_SHIFT) + 1 ;
base_freq *= 1000000 ;
frac_freq = ((ts_override &
GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK) >>
GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_SHIFT);
frac_freq = 1000000 / (frac_freq + 1 );
return base_freq + frac_freq;
}
static u32 gen11_get_crystal_clock_freq(struct intel_uncore *uncore,
u32 rpm_config_reg)
{
u32 f19_2_mhz = 19200000 ;
u32 f24_mhz = 24000000 ;
u32 f25_mhz = 25000000 ;
u32 f38_4_mhz = 38400000 ;
u32 crystal_clock = rpm_config_reg & GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK;
switch (crystal_clock) {
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
return f24_mhz;
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
return f19_2_mhz;
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_38_4_MHZ:
return f38_4_mhz;
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_25_MHZ:
return f25_mhz;
default :
MISSING_CASE(crystal_clock);
return 0 ;
}
}
static u32 gen11_read_clock_frequency(struct intel_uncore *uncore)
{
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0 ;
/*
* Note that on gen11 + , the clock frequency may be reconfigured .
* We do not , and we assume nobody else does .
*
* First figure out the reference frequency . There are 2 ways
* we can compute the frequency , either through the
* TIMESTAMP_OVERRIDE register or through RPM_CONFIG . CTC_MODE
* tells us which one we should use .
*/
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
freq = gen11_get_crystal_clock_freq(uncore, c0);
/*
* Now figure out how the command stream ' s timestamp
* register increments from this frequency ( it might
* increment only every few clock cycle ) .
*/
freq >>= 3 - REG_FIELD_GET(GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK, c0);
}
return freq;
}
static u32 gen9_read_clock_frequency(struct intel_uncore *uncore)
{
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0 ;
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
freq = IS_GEN9_LP(uncore->i915) ? 19200000 : 24000000 ;
/*
* Now figure out how the command stream ' s timestamp
* register increments from this frequency ( it might
* increment only every few clock cycle ) .
*/
freq >>= 3 - REG_FIELD_GET(CTC_SHIFT_PARAMETER_MASK, ctc_reg);
}
return freq;
}
static u32 gen6_read_clock_frequency(struct intel_uncore *uncore)
{
/*
* PRMs say :
*
* " The PCU TSC counts 10 ns increments ; this timestamp
* reflects bits 38 : 3 of the TSC ( i . e . 80 ns granularity ,
* rolling over every 1 . 5 hours ) .
*/
return 12500000 ;
}
static u32 gen5_read_clock_frequency(struct intel_uncore *uncore)
{
/*
* 63 : 32 increments every 1000 ns
* 31 : 0 mbz
*/
return 1000000000 / 1000 ;
}
static u32 g4x_read_clock_frequency(struct intel_uncore *uncore)
{
/*
* 63 : 20 increments every 1 / 4 ns
* 19 : 0 mbz
*
* - > 63 : 32 increments every 1024 ns
*/
return 1000000000 / 1024 ;
}
static u32 gen4_read_clock_frequency(struct intel_uncore *uncore)
{
/*
* PRMs say :
*
* " The value in this register increments once every 16
* hclks . " ( through the “ Clocking Configuration ”
* ( “ CLKCFG ” ) MCHBAR register )
*
* Testing on actual hardware has shown there is no / 16 .
*/
return DIV_ROUND_CLOSEST(i9xx_fsb_freq(uncore->i915), 4 ) * 1000 ;
}
static u32 read_clock_frequency(struct intel_uncore *uncore)
{
if (GRAPHICS_VER(uncore->i915) >= 11 )
return gen11_read_clock_frequency(uncore);
else if (GRAPHICS_VER(uncore->i915) >= 9 )
return gen9_read_clock_frequency(uncore);
else if (GRAPHICS_VER(uncore->i915) >= 6 )
return gen6_read_clock_frequency(uncore);
else if (GRAPHICS_VER(uncore->i915) == 5 )
return gen5_read_clock_frequency(uncore);
else if (IS_G4X(uncore->i915))
return g4x_read_clock_frequency(uncore);
else if (GRAPHICS_VER(uncore->i915) == 4 )
return gen4_read_clock_frequency(uncore);
else
return 0 ;
}
void intel_gt_init_clock_frequency(struct intel_gt *gt)
{
gt->clock_frequency = read_clock_frequency(gt->uncore);
/* Icelake appears to use another fixed frequency for CTX_TIMESTAMP */
if (GRAPHICS_VER(gt->i915) == 11 )
gt->clock_period_ns = NSEC_PER_SEC / 13750000 ;
else if (gt->clock_frequency)
gt->clock_period_ns = intel_gt_clock_interval_to_ns(gt, 1 );
GT_TRACE(gt,
"Using clock frequency: %dkHz, period: %dns, wrap: %lldms\n" ,
gt->clock_frequency / 1000 ,
gt->clock_period_ns,
div_u64(mul_u32_u32(gt->clock_period_ns, S32_MAX),
USEC_PER_SEC));
}
#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)
void intel_gt_check_clock_frequency(const struct intel_gt *gt)
{
if (gt->clock_frequency != read_clock_frequency(gt->uncore)) {
gt_err(gt, "GT clock frequency changed, was %uHz, now %uHz!\n" ,
gt->clock_frequency,
read_clock_frequency(gt->uncore));
}
}
#endif
static u64 div_u64_roundup(u64 nom, u32 den)
{
return div_u64(nom + den - 1 , den);
}
u64 intel_gt_clock_interval_to_ns(const struct intel_gt *gt, u64 count)
{
return mul_u64_u32_div(count, NSEC_PER_SEC, gt->clock_frequency);
}
u64 intel_gt_pm_interval_to_ns(const struct intel_gt *gt, u64 count)
{
return intel_gt_clock_interval_to_ns(gt, 16 * count);
}
u64 intel_gt_ns_to_clock_interval(const struct intel_gt *gt, u64 ns)
{
return mul_u64_u32_div(ns, gt->clock_frequency, NSEC_PER_SEC);
}
u64 intel_gt_ns_to_pm_interval(const struct intel_gt *gt, u64 ns)
{
u64 val;
/*
* Make these a multiple of magic 25 to avoid SNB ( eg . Dell XPS
* 8300 ) freezing up around GPU hangs . Looks as if even
* scheduling / timer interrupts start misbehaving if the RPS
* EI / thresholds are " bad " , leading to a very sluggish or even
* frozen machine .
*/
val = div_u64_roundup(intel_gt_ns_to_clock_interval(gt, ns), 16 );
if (GRAPHICS_VER(gt->i915) == 6 )
val = div_u64_roundup(val, 25 ) * 25 ;
return val;
}
Messung V0.5 in Prozent C=96 H=100 G=97
¤ Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.0.10Bemerkung:
(Wie Sie bei der Firma Beratungs- und Dienstleistungen beauftragen können 2026-10-03)
¤
*Bot Zugriff