// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright ( C ) 2006 Juergen Beisert , Pengutronix
* Copyright ( C ) 2008 Guennadi Liakhovetski , Pengutronix
* Copyright ( C ) 2009 Wolfram Sang , Pengutronix
*
* Check max730x . c for further details .
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/max7301.h>
/* A write to the MAX7301 means one message with one transfer */
static int max7301_spi_write(struct device *dev, unsigned int reg,
unsigned int val)
{
struct spi_device *spi = to_spi_device(dev);
u16 word = ((reg & 0 x7F) << 8 ) | (val & 0 xFF);
return spi_write_then_read(spi, &word, sizeof (word), NULL, 0 );
}
/* A read from the MAX7301 means two transfers; here, one message each */
static int max7301_spi_read(struct device *dev, unsigned int reg)
{
int ret;
u16 word;
struct spi_device *spi = to_spi_device(dev);
word = 0 x8000 | (reg << 8 );
ret = spi_write_then_read(spi, &word, sizeof (word), &word,
sizeof (word));
if (ret)
return ret;
return word & 0 xff;
}
static int max7301_probe(struct spi_device *spi)
{
struct max7301 *ts;
int ret;
/* bits_per_word cannot be configured in platform data */
spi->bits_per_word = 16 ;
ret = spi_setup(spi);
if (ret < 0 )
return ret;
ts = devm_kzalloc(&spi->dev, sizeof (struct max7301), GFP_KERNEL);
if (!ts)
return -ENOMEM;
ts->read = max7301_spi_read;
ts->write = max7301_spi_write;
ts->dev = &spi->dev;
ret = __max730x_probe(ts);
return ret;
}
static void max7301_remove(struct spi_device *spi)
{
__max730x_remove(&spi->dev);
}
static const struct spi_device_id max7301_id[] = {
{ "max7301" , 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, max7301_id);
static struct spi_driver max7301_driver = {
.driver = {
.name = "max7301" ,
},
.probe = max7301_probe,
.remove = max7301_remove,
.id_table = max7301_id,
};
static int __init max7301_init(void )
{
return spi_register_driver(&max7301_driver);
}
/* register after spi postcore initcall and before
* subsys initcalls that may rely on these GPIOs
*/
subsys_initcall(max7301_init);
static void __exit max7301_exit(void )
{
spi_unregister_driver(&max7301_driver);
}
module_exit(max7301_exit);
MODULE_AUTHOR("Juergen Beisert, Wolfram Sang" );
MODULE_LICENSE("GPL v2" );
MODULE_DESCRIPTION("MAX7301 GPIO-Expander" );
Messung V0.5 in Prozent C=98 H=100 G=98
¤ Dauer der Verarbeitung: 0.10 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland