// SPDX-License-Identifier: GPL-2.0-only
/*
* timer - ti - 32 k . c - OMAP2 32 k Timer Support
*
* Copyright ( C ) 2009 Nokia Corporation
*
* Update to use new clocksource / clockevent layers
* Author : Kevin Hilman , MontaVista Software , Inc . < source @ mvista . com >
* Copyright ( C ) 2007 MontaVista Software , Inc .
*
* Original driver :
* Copyright ( C ) 2005 Nokia Corporation
* Author : Paul Mundt < paul . mundt @ nokia . com >
* Juha Yrj ö l ä < juha . yrjola @ nokia . com >
* OMAP Dual - mode timer framework support by Timo Teras
*
* Some parts based off of TI ' s 24 xx code :
*
* Copyright ( C ) 2004 - 2009 Texas Instruments , Inc .
*
* Roughly modelled after the OMAP1 MPU timer code .
* Added OMAP4 support - Santosh Shilimkar < santosh . shilimkar @ ti . com >
*
* Copyright ( C ) 2015 Texas Instruments Incorporated - https : //www.ti.com
*/
#include <linux/clk.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/sched_clock.h>
#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
/*
* 32 KHz clocksource . . . always available , on pretty most chips except
* OMAP 730 and 1510 . Other timers could be used as clocksources , with
* higher resolution in free - running counter modes ( e . g . 12 MHz xtal ) ,
* but systems won ' t necessarily want to spend resources that way .
*/
#define OMAP2_32KSYNCNT_REV_OFF 0 x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0 x3 << 30 )
#define OMAP2_32KSYNCNT_CR_OFF_LOW 0 x10
#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0 x30
struct ti_32k {
void __iomem *base;
void __iomem *counter;
struct clocksource cs;
};
static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
{
return container_of(cs, struct ti_32k, cs);
}
static u64 notrace ti_32k_read_cycles(struct clocksource *cs)
{
struct ti_32k *ti = to_ti_32k(cs);
return (u64)readl_relaxed(ti->counter);
}
static struct ti_32k ti_32k_timer = {
.cs = {
.name = "32k_counter" ,
.rating = 250 ,
.read = ti_32k_read_cycles,
.mask = CLOCKSOURCE_MASK(32 ),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
};
static u64 notrace omap_32k_read_sched_clock(void )
{
return ti_32k_read_cycles(&ti_32k_timer.cs);
}
static void __init ti_32k_timer_enable_clock(struct device_node *np,
const char *name)
{
struct clk *clock;
int error;
clock = of_clk_get_by_name(np->parent, name);
if (IS_ERR(clock)) {
/* Only some SoCs have a separate interface clock */
if (PTR_ERR(clock) == -EINVAL && !strncmp("ick" , name, 3 ))
return ;
pr_warn("%s: could not get clock %s %li\n" ,
__func__, name, PTR_ERR(clock));
return ;
}
error = clk_prepare_enable(clock);
if (error) {
pr_warn("%s: could not enable %s: %i\n" ,
__func__, name, error);
return ;
}
}
static void __init ti_32k_timer_module_init(struct device_node *np,
void __iomem *base)
{
void __iomem *sysc = base + 4 ;
if (!of_device_is_compatible(np->parent, "ti,sysc" ))
return ;
ti_32k_timer_enable_clock(np, "fck" );
ti_32k_timer_enable_clock(np, "ick" );
/*
* Force idle module as wkup domain is active with MPU .
* No need to tag the module disabled for ti - sysc probe .
*/
writel_relaxed(0 , sysc);
}
static int __init ti_32k_timer_init(struct device_node *np)
{
int ret;
ti_32k_timer.base = of_iomap(np, 0 );
if (!ti_32k_timer.base) {
pr_err("Can't ioremap 32k timer base\n" );
return -ENXIO;
}
if (!of_machine_is_compatible("ti,am43" ))
ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
ti_32k_timer.counter = ti_32k_timer.base;
ti_32k_timer_module_init(np, ti_32k_timer.base);
/*
* 32 k sync Counter IP register offsets vary between the highlander
* version and the legacy ones .
*
* The ' SCHEME ' bits ( 30 - 31 ) of the revision register is used to identify
* the version .
*/
if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
OMAP2_32KSYNCNT_REV_SCHEME)
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
else
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n" );
ret = clocksource_register_hz(&ti_32k_timer.cs, 32768 );
if (ret) {
pr_err("32k_counter: can't register clocksource\n" );
return ret;
}
sched_clock_register(omap_32k_read_sched_clock, 32 , 32768 );
return 0 ;
}
TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k" ,
ti_32k_timer_init);
Messung V0.5 in Prozent C=98 H=88 G=93
¤ Dauer der Verarbeitung: 0.12 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland