// SPDX-License-Identifier: GPL-2.0
/*
* Qualcomm APCS clock controller driver
*
* Copyright ( c ) 2022 , Linaro Limited
* Author : Dmitry Baryshkov < dmitry . baryshkov @ linaro . org >
*/
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#define APCS_AUX_OFFSET 0 x50
#define APCS_AUX_DIV_MASK GENMASK(17 , 16 )
#define APCS_AUX_DIV_2 0 x1
static int qcom_apcs_msm8996_clk_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device *parent = dev->parent;
struct regmap *regmap;
struct clk_hw *hw;
unsigned int val;
int ret = -ENODEV;
regmap = dev_get_regmap(parent, NULL);
if (!regmap) {
dev_err(dev, "failed to get regmap: %d\n" , ret);
return ret;
}
regmap_read(regmap, APCS_AUX_OFFSET, &val);
regmap_update_bits(regmap, APCS_AUX_OFFSET, APCS_AUX_DIV_MASK,
FIELD_PREP(APCS_AUX_DIV_MASK, APCS_AUX_DIV_2));
/*
* This clock is used during CPU cluster setup while setting up CPU PLLs .
* Add hardware mandated delay to make sure that the sys_apcs_aux clock
* is stable ( after setting the divider ) before continuing
* bootstrapping to keep CPUs from ending up in a weird state .
*/
udelay(5 );
/*
* As this clocks is a parent of the CPU cluster clocks and is actually
* used as a parent during CPU clocks setup , we want for it to register
* as early as possible , without letting fw_devlink to delay probing of
* either of the drivers .
*
* The sys_apcs_aux is a child ( divider ) of gpll0 , but we register it
* as a fixed rate clock instead to ease bootstrapping procedure . By
* doing this we make sure that CPU cluster clocks are able to be setup
* early during the boot process ( as it is recommended by Qualcomm ) .
*/
hw = devm_clk_hw_register_fixed_rate(dev, "sys_apcs_aux" , NULL, 0 , 300000000 );
if (IS_ERR(hw))
return PTR_ERR(hw);
return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, hw);
}
static struct platform_driver qcom_apcs_msm8996_clk_driver = {
.probe = qcom_apcs_msm8996_clk_probe,
.driver = {
.name = "qcom-apcs-msm8996-clk" ,
},
};
/* Register early enough to fix the clock to be used for other cores */
static int __init qcom_apcs_msm8996_clk_init(void )
{
return platform_driver_register(&qcom_apcs_msm8996_clk_driver);
}
postcore_initcall(qcom_apcs_msm8996_clk_init);
static void __exit qcom_apcs_msm8996_clk_exit(void )
{
platform_driver_unregister(&qcom_apcs_msm8996_clk_driver);
}
module_exit(qcom_apcs_msm8996_clk_exit);
MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>" );
MODULE_LICENSE("GPL" );
MODULE_DESCRIPTION("Qualcomm MSM8996 APCS clock driver" );
Messung V0.5 in Prozent C=97 H=86 G=91
¤ Dauer der Verarbeitung: 0.11 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland