/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Ingenic SoC CGU driver
*
* Copyright ( c ) 2013 - 2015 Imagination Technologies
* Author : Paul Burton < paul . burton @ mips . com >
*/
#ifndef __DRIVERS_CLK_INGENIC_CGU_H__
#define __DRIVERS_CLK_INGENIC_CGU_H__
#include <linux/bitops.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/spinlock.h>
/**
* struct ingenic_cgu_pll_info - information about a PLL
* @ reg : the offset of the PLL ' s control register within the CGU
* @ rate_multiplier : the multiplier needed by pll rate calculation
* @ m_shift : the number of bits to shift the multiplier value by ( ie . the
* index of the lowest bit of the multiplier value in the PLL ' s
* control register )
* @ m_bits : the size of the multiplier field in bits
* @ m_offset : the multiplier value which encodes to 0 in the PLL ' s control
* register
* @ n_shift : the number of bits to shift the divider value by ( ie . the
* index of the lowest bit of the divider value in the PLL ' s
* control register )
* @ n_bits : the size of the divider field in bits
* @ n_offset : the divider value which encodes to 0 in the PLL ' s control
* register
* @ od_shift : the number of bits to shift the post - VCO divider value by ( ie .
* the index of the lowest bit of the post - VCO divider value in
* the PLL ' s control register )
* @ od_bits : the size of the post - VCO divider field in bits , or 0 if no
* OD field exists ( then the OD is fixed to 1 )
* @ od_max : the maximum post - VCO divider value
* @ od_encoding : a pointer to an array mapping post - VCO divider values to
* their encoded values in the PLL control register , or - 1 for
* unsupported values
* @ bypass_reg : the offset of the bypass control register within the CGU
* @ bypass_bit : the index of the bypass bit in the PLL control register , or
* - 1 if there is no bypass bit
* @ enable_bit : the index of the enable bit in the PLL control register , or
* - 1 if there is no enable bit ( ie , the PLL is always on )
* @ stable_bit : the index of the stable bit in the PLL control register , or
* - 1 if there is no stable bit
* @ set_rate_hook : hook called immediately after updating the CGU register ,
* before releasing the spinlock
*/
struct ingenic_cgu_pll_info {
unsigned reg;
unsigned rate_multiplier;
const s8 *od_encoding;
u8 m_shift, m_bits, m_offset;
u8 n_shift, n_bits, n_offset;
u8 od_shift, od_bits, od_max;
unsigned bypass_reg;
s8 bypass_bit;
s8 enable_bit;
s8 stable_bit;
void (*calc_m_n_od)(const struct ingenic_cgu_pll_info *pll_info,
unsigned long rate, unsigned long parent_rate,
unsigned int *m, unsigned int *n, unsigned int *od);
void (*set_rate_hook)(const struct ingenic_cgu_pll_info *pll_info,
unsigned long rate, unsigned long parent_rate);
};
/**
* struct ingenic_cgu_mux_info - information about a clock mux
* @ reg : offset of the mux control register within the CGU
* @ shift : number of bits to shift the mux value by ( ie . the index of
* the lowest bit of the mux value within its control register )
* @ bits : the size of the mux value in bits
*/
struct ingenic_cgu_mux_info {
unsigned reg;
u8 shift;
u8 bits;
};
/**
* struct ingenic_cgu_div_info - information about a divider
* @ reg : offset of the divider control register within the CGU
* @ shift : number of bits to left shift the divide value by ( ie . the index of
* the lowest bit of the divide value within its control register )
* @ div : number to divide the divider value by ( i . e . if the
* effective divider value is the value written to the register
* multiplied by some constant )
* @ bits : the size of the divide value in bits
* @ ce_bit : the index of the change enable bit within reg , or - 1 if there
* isn ' t one
* @ busy_bit : the index of the busy bit within reg , or - 1 if there isn ' t one
* @ stop_bit : the index of the stop bit within reg , or - 1 if there isn ' t one
* @ bypass_mask : mask of parent clocks for which the divider does not apply
* @ div_table : optional table to map the value read from the register to the
* actual divider value
*/
struct ingenic_cgu_div_info {
unsigned reg;
u8 shift;
u8 div;
u8 bits;
s8 ce_bit;
s8 busy_bit;
s8 stop_bit;
u8 bypass_mask;
const u8 *div_table;
};
/**
* struct ingenic_cgu_fixdiv_info - information about a fixed divider
* @ div : the divider applied to the parent clock
*/
struct ingenic_cgu_fixdiv_info {
unsigned div;
};
/**
* struct ingenic_cgu_gate_info - information about a clock gate
* @ reg : offset of the gate control register within the CGU
* @ bit : offset of the bit in the register that controls the gate
* @ clear_to_gate : if set , the clock is gated when the bit is cleared
* @ delay_us : delay in microseconds after which the clock is considered stable
*/
struct ingenic_cgu_gate_info {
unsigned reg;
u8 bit;
bool clear_to_gate;
u16 delay_us;
};
/**
* struct ingenic_cgu_custom_info - information about a custom ( SoC ) clock
* @ clk_ops : custom clock operation callbacks
*/
struct ingenic_cgu_custom_info {
const struct clk_ops *clk_ops;
};
/**
* struct ingenic_cgu_clk_info - information about a clock
* @ name : name of the clock
* @ type : a bitmask formed from CGU_CLK_ * values
* @ flags : common clock flags to set on this clock
* @ parents : an array of the indices of potential parents of this clock
* within the clock_info array of the CGU , or - 1 in entries
* which correspond to no valid parent
* @ pll : information valid if type includes CGU_CLK_PLL
* @ gate : information valid if type includes CGU_CLK_GATE
* @ mux : information valid if type includes CGU_CLK_MUX
* @ div : information valid if type includes CGU_CLK_DIV
* @ fixdiv : information valid if type includes CGU_CLK_FIXDIV
* @ custom : information valid if type includes CGU_CLK_CUSTOM
*/
struct ingenic_cgu_clk_info {
const char *name;
enum {
CGU_CLK_NONE = 0 ,
CGU_CLK_EXT = BIT(0 ),
CGU_CLK_PLL = BIT(1 ),
CGU_CLK_GATE = BIT(2 ),
CGU_CLK_MUX = BIT(3 ),
CGU_CLK_MUX_GLITCHFREE = BIT(4 ),
CGU_CLK_DIV = BIT(5 ),
CGU_CLK_FIXDIV = BIT(6 ),
CGU_CLK_CUSTOM = BIT(7 ),
} type;
unsigned long flags;
int parents[4 ];
union {
struct ingenic_cgu_pll_info pll;
struct {
struct ingenic_cgu_gate_info gate;
struct ingenic_cgu_mux_info mux;
struct ingenic_cgu_div_info div;
struct ingenic_cgu_fixdiv_info fixdiv;
};
struct ingenic_cgu_custom_info custom;
};
};
/**
* struct ingenic_cgu - data about the CGU
* @ np : the device tree node that caused the CGU to be probed
* @ base : the ioremap ' ed base address of the CGU registers
* @ clock_info : an array containing information about implemented clocks
* @ clocks : used to provide clocks to DT , allows lookup of struct clk *
* @ lock : lock to be held whilst manipulating CGU registers
*/
struct ingenic_cgu {
struct device_node *np;
void __iomem *base;
const struct ingenic_cgu_clk_info *clock_info;
struct clk_onecell_data clocks;
spinlock_t lock;
};
/**
* struct ingenic_clk - private data for a clock
* @ hw : see Documentation / driver - api / clk . rst
* @ cgu : a pointer to the CGU data
* @ idx : the index of this clock in cgu - > clock_info
*/
struct ingenic_clk {
struct clk_hw hw;
struct ingenic_cgu *cgu;
unsigned idx;
};
#define to_ingenic_clk(_hw) container_of(_hw, struct ingenic_clk, hw)
/**
* ingenic_cgu_new ( ) - create a new CGU instance
* @ clock_info : an array of clock information structures describing the clocks
* which are implemented by the CGU
* @ num_clocks : the number of entries in clock_info
* @ np : the device tree node which causes this CGU to be probed
*
* Return : a pointer to the CGU instance if initialisation is successful ,
* otherwise NULL .
*/
struct ingenic_cgu *
ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,
unsigned num_clocks, struct device_node *np);
/**
* ingenic_cgu_register_clocks ( ) - Registers the clocks
* @ cgu : pointer to cgu data
*
* Register the clocks described by the CGU with the common clock framework .
*
* Return : 0 on success or - errno if unsuccessful .
*/
int ingenic_cgu_register_clocks(struct ingenic_cgu *cgu);
#endif /* __DRIVERS_CLK_INGENIC_CGU_H__ */
Messung V0.5 in Prozent C=94 H=100 G=96
¤ Dauer der Verarbeitung: 0.17 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland