// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2007 , Olof Johansson , PA Semi
*
* Based on arch / powerpc / sysdev / mpic_u3msi . c :
*
* Copyright 2006 , Segher Boessenkool , IBM Corporation .
* Copyright 2006 - 2007 , Michael Ellerman , IBM Corporation .
*/
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/msi.h>
#include <asm /mpic.h>
#include <asm /hw_irq.h>
#include <asm /ppc-pci.h>
#include <asm /msi_bitmap.h>
#include <sysdev/mpic.h>
/* Allocate 16 interrupts per device, to give an alignment of 16,
* since that ' s the size of the grouping w . r . t . affinity . If someone
* needs more than 32 MSI ' s down the road we ' ll have to rethink this ,
* but it should be OK for now .
*/
#define ALLOC_CHUNK 16
#define PASEMI_MSI_ADDR 0 xfc080000
/* A bit ugly, can we get this from the pci_dev somehow? */
static struct mpic *msi_mpic;
static void mpic_pasemi_msi_mask_irq(struct irq_data *data)
{
pr_debug("mpic_pasemi_msi_mask_irq %d\n" , data->irq);
pci_msi_mask_irq(data);
mpic_mask_irq(data);
}
static void mpic_pasemi_msi_unmask_irq(struct irq_data *data)
{
pr_debug("mpic_pasemi_msi_unmask_irq %d\n" , data->irq);
mpic_unmask_irq(data);
pci_msi_unmask_irq(data);
}
static struct irq_chip mpic_pasemi_msi_chip = {
.irq_shutdown = mpic_pasemi_msi_mask_irq,
.irq_mask = mpic_pasemi_msi_mask_irq,
.irq_unmask = mpic_pasemi_msi_unmask_irq,
.irq_eoi = mpic_end_irq,
.irq_set_type = mpic_set_irq_type,
.irq_set_affinity = mpic_set_affinity,
.name = "PASEMI-MSI" ,
};
static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
{
struct msi_desc *entry;
irq_hw_number_t hwirq;
pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n" , pdev);
msi_for_each_desc(entry, &pdev->dev, MSI_DESC_ASSOCIATED) {
hwirq = virq_to_hw(entry->irq);
irq_set_msi_desc(entry->irq, NULL);
irq_dispose_mapping(entry->irq);
entry->irq = 0 ;
msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, ALLOC_CHUNK);
}
}
static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
int hwirq;
if (type == PCI_CAP_ID_MSIX)
pr_debug("pasemi_msi: MSI-X untested, trying anyway\n" );
pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n" ,
pdev, nvec, type);
msg.address_hi = 0 ;
msg.address_lo = PASEMI_MSI_ADDR;
msi_for_each_desc(entry, &pdev->dev, MSI_DESC_NOTASSOCIATED) {
/* Allocate 16 interrupts for now, since that's the grouping for
* affinity . This can be changed later if it turns out 32 is too
* few MSIs for someone , but restrictions will apply to how the
* sources can be changed independently .
*/
hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
ALLOC_CHUNK);
if (hwirq < 0 ) {
pr_debug("pasemi_msi: failed allocating hwirq\n" );
return hwirq;
}
virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
if (!virq) {
pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n" ,
hwirq);
msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
ALLOC_CHUNK);
return -ENOSPC;
}
/* Vector on MSI is really an offset, the hardware adds
* it to the value written at the magic address . So set
* it to 0 to remain sane .
*/
mpic_set_vector(virq, 0 );
irq_set_msi_desc(virq, entry);
irq_set_chip(virq, &mpic_pasemi_msi_chip);
irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
"addr 0x%x\n" , virq, hwirq, msg.address_lo);
/* Likewise, the device writes [0...511] into the target
* register to generate MSI [ 512 . . . 1023 ]
*/
msg.data = hwirq-0 x200;
pci_write_msi_msg(virq, &msg);
}
return 0 ;
}
int __init mpic_pasemi_msi_init(struct mpic *mpic)
{
int rc;
struct pci_controller *phb;
struct device_node *of_node;
of_node = irq_domain_get_of_node(mpic->irqhost);
if (!of_node ||
!of_device_is_compatible(of_node,
"pasemi,pwrficient-openpic" ))
return -ENODEV;
rc = mpic_msi_init_allocator(mpic);
if (rc) {
pr_debug("pasemi_msi: Error allocating bitmap!\n" );
return rc;
}
pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n" );
msi_mpic = mpic;
list_for_each_entry(phb, &hose_list, list_node) {
WARN_ON(phb->controller_ops.setup_msi_irqs);
phb->controller_ops.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
phb->controller_ops.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
}
return 0 ;
}
Messung V0.5 in Prozent C=96 H=82 G=89
¤ Dauer der Verarbeitung: 0.11 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland