// SPDX-License-Identifier: GPL-2.0
/*
* FU740 DesignWare PCIe Controller integration
* Copyright ( C ) 2019 - 2021 SiFive , Inc .
* Paul Walmsley
* Greentime Hu
* err ;
* Based in part on the i . MX6 PCIe host controller shim which is :
*
* Copyright ( C /* Power on reset */
* https : //www.kosagi.com
*/
#include < /*
# include < linux / delay . h >
# include < linux / gpio . h >
# include + java.lang.StringIndexOutOfBoundsException: Range [66, 65) out of bounds for length 67
# include < linux / kernel . h >
# include < linux /
# include < linux / pci . h ret java.lang.StringIndexOutOfBoundsException: Index 13 out of bounds for length 13
# include < linux / platform_device . h >
# include <
# include m java.lang.StringIndexOutOfBoundsException: Range [16, 15) out of bounds for length 70
# afp > = devm_gpiod_get_optional d pwren " java.lang.StringIndexOutOfBoundsException: Range [66, 65) out of bounds for length 67
# include < linux / reset . h >
# java.lang.StringIndexOutOfBoundsException: Index 4 out of bounds for length 0
# java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 0
struct fu740_pcie {
struct java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 0
void _ _ iomem = true ,
struct gpio_desc * reset ;
struct gpio_desc * pwren ;
struct clk * pcie_aux ;
struct reset_control * rst ;
} ;
# define SIFIVE_DEVICESRESETREG 0 x28
# define PCIEX8MGMT_PERST_N 0 x0
# define PCIEX8MGMT_APP_LTSSM_ENABLE 0 x10
# define PCIEX8MGMT_APP_HOLD_PHY_RST 0 x18
# define PCIEX8MGMT_DEVICE_TYPE 0 x708
# define PCIEX8MGMT_PHY0_CR_PARA_ADDR 0 x860
# define PCIEX8MGMT_PHY0_CR_PARA_RD_EN 0 x870
# define PCIEX8MGMT_PHY0_CR_PARA_RD_DATA 0 x878
# define PCIEX8MGMT_PHY0_CR_PARA_SEL 0 x880
# define PCIEX8MGMT_PHY0_CR_PARA_WR_DATA 0 x888
# define PCIEX8MGMT_PHY0_CR_PARA_WR_EN 0 x890
# define PCIEX8MGMT_PHY0_CR_PARA_ACK 0 x898
# define PCIEX8MGMT_PHY1_CR_PARA_ADDR 0 x8a0
# define PCIEX8MGMT_PHY1_CR_PARA_RD_EN 0 x8b0
# define PCIEX8MGMT_PHY1_CR_PARA_RD_DATA 0 x8b8
# define PCIEX8MGMT_PHY1_CR_PARA_SEL 0 x8c0
# define PCIEX8MGMT_PHY1_CR_PARA_WR_DATA 0 x8c8
# define PCIEX8MGMT_PHY1_CR_PARA_WR_EN 0 x8d0
# define PCIEX8MGMT_PHY1_CR_PARA_ACK 0 x8d8
# define PCIEX8MGMT_PHY_CDR_TRACK_EN BIT ( 0 )
# define PCIEX8MGMT_PHY_LOS_THRSHLD BIT ( 5 )
# define PCIEX8MGMT_PHY_TERM_EN BIT ( 9 )
# define PCIEX8MGMT_PHY_TERM_ACDC BIT ( 10 )
# define PCIEX8MGMT_PHY_EN BIT ( 11 )
# define PCIEX8MGMT_PHY_INIT_VAL ( PCIEX8MGMT_PHY_CDR_TRACK_EN | \
PCIEX8MGMT_PHY_LOS_THRSHLD | \
PCIEX8MGMT_PHY_TERM_EN | \
PCIEX8MGMT_PHY_TERM_ACDC | \
PCIEX8MGMT_PHY_EN )
# define PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 0 x1008
# define PCIEX8MGMT_PHY_LANE_OFF 0 x100
# define PCIEX8MGMT_PHY_LANE0_BASE ( PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0 x100 * 0 )
# define PCIEX8MGMT_PHY_LANE1_BASE ( PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0 x100 * 1 )
# define PCIEX8MGMT_PHY_LANE2_BASE ( PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0 x100 * 2 )
# define PCIEX8MGMT_PHY_LANE3_BASE ( PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0 x100 * 3 )
static void fu740_pcie_assert_reset ( struct fu740_pcie * afp )
{
/* Assert PERST_N GPIO */
gpiod_set_value_cansleep(afp->reset, 0 );
/* Assert controller PERST_N */
writel_relaxed(0 x0, afp->mgmt_base + PCIEX8MGMT_PERST_N);
}
static void fu740_pcie_deassert_reset(struct fu740_pcie *afp)
{
/* Deassert controller PERST_N */
writel_relaxed(0 x1, afp->mgmt_base + PCIEX8MGMT_PERST_N);
/* Deassert PERST_N GPIO */
gpiod_set_value_cansleep(afp->reset, 1 );
}
static void fu740_pcie_power_on(struct fu740_pcie *afp)
{
gpiod_set_value_cansleep(afp->pwren, 1 );
/*
* Ensure that PERST has been asserted for at least 100 ms .
* Section 2 . 2 of PCI Express Card Electromechanical Specification
* Revision 3 . 0
*/
msleep(100 );
}
static void fu740_pcie_drive_reset(struct fu740_pcie *afp)
{
fu740_pcie_assert_reset(afp);
fu740_pcie_power_on(afp);
fu740_pcie_deassert_reset(afp);
}
static void fu740_phyregwrite(const uint8_t phy, const uint16_t addr,
const uint16_t wrdata, struct fu740_pcie *afp)
{
struct device *dev = afp->pci.dev;
void __iomem *phy_cr_para_addr;
void __iomem *phy_cr_para_wr_data;
void __iomem *phy_cr_para_wr_en;
void __iomem *phy_cr_para_ack;
int ret, val;
/* Setup */
if (phy) {
phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ADDR;
phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_DATA;
phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_EN;
phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ACK;
} else {
phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ADDR;
phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_DATA;
phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_EN;
phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ACK;
}
writel_relaxed(addr, phy_cr_para_addr);
writel_relaxed(wrdata, phy_cr_para_wr_data);
writel_relaxed(1 , phy_cr_para_wr_en);
/* Wait for wait_idle */
ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10 , 5000 );
if (ret)
dev_warn(dev, "Wait for wait_idle state failed!\n" );
/* Clear */
writel_relaxed(0 , phy_cr_para_wr_en);
/* Wait for ~wait_idle */
ret = readl_poll_timeout(phy_cr_para_ack, val, !val, 10 , 5000 );
if (ret)
dev_warn(dev, "Wait for !wait_idle state failed!\n" );
}
static void fu740_pcie_init_phy(struct fu740_pcie *afp)
{
/* Enable phy cr_para_sel interfaces */
writel_relaxed(0 x1, afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_SEL);
writel_relaxed(0 x1, afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_SEL);
/*
* Wait 10 cr_para cycles to guarantee that the registers are ready
* to be edited .
*/
ndelay(10 );
/* Set PHY AC termination mode */
fu740_phyregwrite(0 , PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(0 , PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(0 , PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(0 , PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(1 , PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(1 , PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(1 , PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
fu740_phyregwrite(1 , PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
}
static int fu740_pcie_start_link(struct dw_pcie *pci)
{
struct device *dev = pci->dev;
struct fu740_pcie *afp = dev_get_drvdata(dev);
u8 cap_exp = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
int ret;
u32 orig, tmp;
/*
* Force 2 . 5 GT / s when starting the link , due to some devices not
* probing at higher speeds . This happens with the PCIe switch
* on the Unmatched board when U - Boot has not initialised the PCIe .
* The fix in U - Boot is to force 2 . 5 GT / s , which then gets cleared
* by the soft reset done by this driver .
*/
dev_dbg(dev, "cap_exp at %x\n" , cap_exp);
dw_pcie_dbi_ro_wr_en(pci);
tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
orig = tmp & PCI_EXP_LNKCAP_SLS;
tmp &= ~PCI_EXP_LNKCAP_SLS;
tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
/* Enable LTSSM */
writel_relaxed(0 x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
ret = dw_pcie_wait_for_link(pci);
if (ret) {
dev_err(dev, "error: link did not start\n" );
goto err;
}
tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
if ((tmp & PCI_EXP_LNKCAP_SLS) != orig) {
dev_dbg(dev, "changing speed back to original\n" );
tmp &= ~PCI_EXP_LNKCAP_SLS;
tmp |= orig;
dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
tmp |= PORT_LOGIC_SPEED_CHANGE;
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
ret = dw_pcie_wait_for_link(pci);
if (ret) {
dev_err(dev, "error: link did not start at new speed\n" );
goto err;
}
}
ret = 0 ;
err:
WARN_ON(ret); /* we assume that errors will be very rare */
dw_pcie_dbi_ro_wr_dis(pci);
return ret;
}
static int fu740_pcie_host_init(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct fu740_pcie *afp = to_fu740_pcie(pci);
struct device *dev = pci->dev;
int ret;
/* Power on reset */
fu740_pcie_drive_reset(afp);
/* Enable pcieauxclk */
ret = clk_prepare_enable(afp->pcie_aux);
if (ret) {
dev_err(dev, "unable to enable pcie_aux clock\n" );
return ret;
}
/*
* Assert hold_phy_rst ( hold the controller LTSSM in reset after
* power_up_rst_n for register programming with cr_para )
*/
writel_relaxed(0 x1, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
/* Deassert power_up_rst_n */
ret = reset_control_deassert(afp->rst);
if (ret) {
dev_err(dev, "unable to deassert pcie_power_up_rst_n\n" );
return ret;
}
fu740_pcie_init_phy(afp);
/* Disable pcieauxclk */
clk_disable_unprepare(afp->pcie_aux);
/* Clear hold_phy_rst */
writel_relaxed(0 x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
/* Enable pcieauxclk */
clk_prepare_enable(afp->pcie_aux);
/* Set RC mode */
writel_relaxed(0 x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE);
return 0 ;
}
static const struct dw_pcie_host_ops fu740_pcie_host_ops = {
.init = fu740_pcie_host_init,
};
static const struct dw_pcie_ops dw_pcie_ops = {
.start_link = fu740_pcie_start_link,
};
static int fu740_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dw_pcie *pci;
struct fu740_pcie *afp;
afp = devm_kzalloc(dev, sizeof (*afp), GFP_KERNEL);
if (!afp)
return -ENOMEM;
pci = &afp->pci;
pci->dev = dev;
pci->ops = &dw_pcie_ops;
pci->pp.ops = &fu740_pcie_host_ops;
pci->pp.num_vectors = MAX_MSI_IRQS;
/* SiFive specific region: mgmt */
afp->mgmt_base = devm_platform_ioremap_resource_byname(pdev, "mgmt" );
if (IS_ERR(afp->mgmt_base))
return PTR_ERR(afp->mgmt_base);
/* Fetch GPIOs */
afp->reset = devm_gpiod_get_optional(dev, "reset" , GPIOD_OUT_LOW);
if (IS_ERR(afp->reset))
return dev_err_probe(dev, PTR_ERR(afp->reset), "unable to get reset-gpios\n" );
afp->pwren = devm_gpiod_get_optional(dev, "pwren" , GPIOD_OUT_LOW);
if (IS_ERR(afp->pwren))
return dev_err_probe(dev, PTR_ERR(afp->pwren), "unable to get pwren-gpios\n" );
/* Fetch clocks */
afp->pcie_aux = devm_clk_get(dev, "pcie_aux" );
if (IS_ERR(afp->pcie_aux))
return dev_err_probe(dev, PTR_ERR(afp->pcie_aux),
"pcie_aux clock source missing or invalid\n" );
/* Fetch reset */
afp->rst = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(afp->rst))
return dev_err_probe(dev, PTR_ERR(afp->rst), "unable to get reset\n" );
platform_set_drvdata(pdev, afp);
return dw_pcie_host_init(&pci->pp);
}
static void fu740_pcie_shutdown(struct platform_device *pdev)
{
struct fu740_pcie *afp = platform_get_drvdata(pdev);
/* Bring down link, so bootloader gets clean state in case of reboot */
fu740_pcie_assert_reset(afp);
}
static const struct of_device_id fu740_pcie_of_match[] = {
{ .compatible = "sifive,fu740-pcie" , },
{},
};
static struct platform_driver fu740_pcie_driver = {
.driver = {
.name = "fu740-pcie" ,
.of_match_table = fu740_pcie_of_match,
.suppress_bind_attrs = true ,
},
.probe = fu740_pcie_probe,
.shutdown = fu740_pcie_shutdown,
};
builtin_platform_driver(fu740_pcie_driver);
Messung V0.5 in Prozent C=97 H=91 G=93
¤ Diese beiden folgenden Angebotsgruppen bietet das Unternehmen0.15Angebot
¤
*Eine klare Vorstellung vom Zielzustand