Quelle  rk3588-h96-max-v58.dts   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3588.dtsi"

/ {
 model = "H96 Max V58 TV Box";
 compatible = "haochuangyi,h96-max-v58", "rockchip,rk3588";

 aliases {
  ethernet0 = &gmac1;
  mmc0 = &sdhci;
 };

 adc-keys {
  compatible = "adc-keys";
  io-channels = <&saradc 1>;
  io-channel-names = "buttons";
  keyup-threshold-microvolt = <1800000>;
  poll-interval = <100>;

  button-function {
   label = "Reset";
   linux,code = <KEY_VENDOR>;
   press-threshold-microvolt = <1750>;
  };
 };

 chosen {
  stdout-path = "serial2:1500000n8";
 };

 hdmi0-con {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi0_con_in: endpoint {
    remote-endpoint = <&hdmi0_out_con>;
   };
  };
 };

 ir-receiver {
  compatible = "gpio-ir-receiver";
  gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&ir_receiver_pin>;
 };

 leds {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&led_pins>;

  led {
   color = <LED_COLOR_ID_BLUE>;
   function = LED_FUNCTION_STATUS;
   gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
  };
 };

 vcc_1v1_nldo_s3: regulator-1v1 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_1v1_nldo_s3";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <1100000>;
  regulator-max-microvolt = <1100000>;
  vin-supply = <&vcc5v0_sys>;
 };

 pcie_3v3: regulator-3v3-pcie {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&pcie2_0_pow>;
  pinctrl-names = "default";
  regulator-name = "pcie_3v3";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc5v0_sys>;
 };

 wl_en_3v3: regulator-3v3-wlen {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&wl_en>;
  pinctrl-names = "default";
  /*
   * Needs to be brought up before the PCIe driver is probed,
   * otherwise detecting the WLAN module requires rescanning
   * the bus, and even then it fails half of the time during
   * firmware load
   */
  regulator-always-on;
  regulator-boot-on;
  regulator-name = "wl_en_3v3";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_host: regulator-5v0-host {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_host";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  enable-active-high;
  gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc5v0_host_en>;
  pinctrl-names = "default";
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_otg: regulator-5v0-otg {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_otg";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  enable-active-high;
  gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc5v0_otg_en>;
  pinctrl-names = "default";
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_sys: regulator-5v0-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 spdif_dit: spdif-dit {
  compatible = "linux,spdif-dit";
  #sound-dai-cells = <0>;
 };

 spdif_sound: spdif-sound {
  compatible = "simple-audio-card";
  simple-audio-card,name = "SPDIF";

  simple-audio-card,cpu {
   sound-dai = <&spdif_tx0>;
  };

  simple-audio-card,codec {
   sound-dai = <&spdif_dit>;
  };
 };
};

&combphy0_ps {
 status = "okay";
};

&combphy1_ps {
 status = "okay";
};

&combphy2_psu {
 status = "okay";
};

&cpu_b0 {
 cpu-supply = <&vdd_cpu_big0_s0>;
};

&cpu_b1 {
 cpu-supply = <&vdd_cpu_big0_s0>;
};

&cpu_b2 {
 cpu-supply = <&vdd_cpu_big1_s0>;
};

&cpu_b3 {
 cpu-supply = <&vdd_cpu_big1_s0>;
};

&cpu_l0 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l1 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l2 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l3 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&gpu {
 mali-supply = <&vdd_gpu_s0>;
 status = "okay";
};

&hdmi0 {
 status = "okay";
};

&hdmi0_in {
 hdmi0_in_vp0: endpoint {
  remote-endpoint = <&vp0_out_hdmi0>;
 };
};

&hdmi0_out {
 hdmi0_out_con: endpoint {
  remote-endpoint = <&hdmi0_con_in>;
 };
};

&hdptxphy0 {
 status = "okay";
};

&i2c0 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c0m2_xfer>;
 status = "okay";

 vdd_cpu_big0_s0: regulator@42 {
  compatible = "rockchip,rk8602";
  reg = <0x42>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu_big0_s0";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <550000>;
  regulator-max-microvolt = <1050000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc5v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };

 vdd_cpu_big1_s0: regulator@43 {
  compatible = "rockchip,rk8603", "rockchip,rk8602";
  reg = <0x43>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu_big1_s0";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <550000>;
  regulator-max-microvolt = <1050000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc5v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };
};

&i2c6 {
 status = "okay";

 hym8563: rtc@51 {
  compatible = "haoyu,hym8563";
  reg = <0x51>;
  #clock-cells = <0>;
  clock-output-names = "hym8563";
  pinctrl-names = "default";
  pinctrl-0 = <&hym8563_int>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
  wakeup-source;
 };
};

&gmac1 {
 clock_in_out = "output";
 phy-handle = <&rgmii_phy1>;
 phy-mode = "rgmii-id";
 pinctrl-0 = <&gmac1_miim
       &gmac1_tx_bus2
       &gmac1_rx_bus2
       &gmac1_rgmii_clk
       &gmac1_rgmii_bus>;
 pinctrl-names = "default";
 status = "okay";
};

&mdio1 {
 rgmii_phy1: ethernet-phy@1 {
  /* RTL8211F */
  compatible = "ethernet-phy-id001c.c916";
  reg = <0x1>;
  pinctrl-names = "default";
  pinctrl-0 = <&rtl8211f_rst>;
  reset-assert-us = <20000>;
  reset-deassert-us = <100000>;
  reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 };
};

&pcie2x1l0 {
 pinctrl-names = "default";
 pinctrl-0 = <&pcie2_0_rst>;
 reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
 status = "okay";

 pcie@0,0 {
  reg = <0x200000 0 0 0 0>;
  #address-cells = <3>;
  #size-cells = <2>;
  ranges;
  device_type = "pci";
  bus-range = <0x20 0x2f>;

  wifi: wifi@0,0 {
   compatible = "pci14e4,449d";
   reg = <0x210000 0 0 0 0>;
   clocks = <&hym8563>;
   clock-names = "lpo";
  };
 };
};

&pd_gpu {
 domain-supply = <&vdd_gpu_s0>;
};

&pinctrl {
 hym8563 {
  hym8563_int: hym8563-int {
   rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 ir-receiver {
  ir_receiver_pin: ir-receiver-pin {
   rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 leds {
  led_pins: led-pins {
   rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pcie2 {
  pcie2_0_rst: pcie2-0-rst {
   rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  pcie2_0_pow: pcie2-0-pow {
   rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 rtl8211f {
  rtl8211f_rst: rtl8211f-rst {
   rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
  };

 };

 usb {
  vcc5v0_host_en: vcc5v0-host-en {
   rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc5v0_otg_en: vcc5v0-otg-en {
   rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 wifibt {
  wl_en: wl-en {
   rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
  };

  wl_wake_host: wl-wake-host {
   rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
  };

  bt_en: bt-en {
   rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
  };

  bt_wake: bt-wake {
   rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
  };

  bt_wake_host: bt-wake-host {
   rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
  };
 };
};

&saradc {
 vref-supply = <&avcc_1v8_s0>;
 status = "okay";
};

&sdhci {
 bus-width = <8>;
 no-sdio;
 no-sd;
 non-removable;
 mmc-hs400-1_8v;
 mmc-hs400-enhanced-strobe;
 status = "okay";
};

&spdif_tx0 {
 pinctrl-names = "default";
 pinctrl-0 = <&spdif0m1_tx>;
 status = "okay";
};

&spi2 {
 assigned-clocks = <&cru CLK_SPI2>;
 assigned-clock-rates = <200000000>;
 num-cs = <1>;
 pinctrl-names = "default";
 pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
 status = "okay";

 pmic@0 {
  compatible = "rockchip,rk806";
  reg = <0x0>;
  interrupt-parent = <&gpio0>;
  interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
       <&rk806_dvs2_null>, <&rk806_dvs3_null>;
  spi-max-frequency = <1000000>;
  system-power-controller;

  vcc1-supply = <&vcc5v0_sys>;
  vcc2-supply = <&vcc5v0_sys>;
  vcc3-supply = <&vcc5v0_sys>;
  vcc4-supply = <&vcc5v0_sys>;
  vcc5-supply = <&vcc5v0_sys>;
  vcc6-supply = <&vcc5v0_sys>;
  vcc7-supply = <&vcc5v0_sys>;
  vcc8-supply = <&vcc5v0_sys>;
  vcc9-supply = <&vcc5v0_sys>;
  vcc10-supply = <&vcc5v0_sys>;
  vcc11-supply = <&vcc_2v0_pldo_s3>;
  vcc12-supply = <&vcc5v0_sys>;
  vcc13-supply = <&vcc_1v1_nldo_s3>;
  vcc14-supply = <&vcc_1v1_nldo_s3>;
  vcca-supply = <&vcc5v0_sys>;

  gpio-controller;
  #gpio-cells = <2>;

  rk806_dvs1_null: dvs1-null-pins {
   pins = "gpio_pwrctrl1";
   function = "pin_fun0";
  };

  rk806_dvs2_null: dvs2-null-pins {
   pins = "gpio_pwrctrl2";
   function = "pin_fun0";
  };

  rk806_dvs3_null: dvs3-null-pins {
   pins = "gpio_pwrctrl3";
   function = "pin_fun0";
  };

  regulators {
   vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
    regulator-name = "vdd_gpu_s0";
    regulator-boot-on;
    regulator-min-microvolt = <550000>;
    regulator-max-microvolt = <950000>;
    regulator-ramp-delay = <12500>;
    regulator-enable-ramp-delay = <400>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
    regulator-name = "vdd_cpu_lit_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <550000>;
    regulator-max-microvolt = <950000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_log_s0: dcdc-reg3 {
    regulator-name = "vdd_log_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <675000>;
    regulator-max-microvolt = <750000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <750000>;
    };
   };

   vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
    regulator-name = "vdd_vdenc_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <550000>;
    regulator-max-microvolt = <950000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_ddr_s0: dcdc-reg5 {
    regulator-name = "vdd_ddr_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <675000>;
    regulator-max-microvolt = <900000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <850000>;
    };
   };

   vdd2_ddr_s3: dcdc-reg6 {
    regulator-name = "vdd2_ddr_s3";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vcc_2v0_pldo_s3: dcdc-reg7 {
    regulator-name = "vdd_2v0_pldo_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <2000000>;
    regulator-max-microvolt = <2000000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <2000000>;
    };
   };

   vcc_3v3_s3: dcdc-reg8 {
    regulator-name = "vcc_3v3_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vddq_ddr_s0: dcdc-reg9 {
    regulator-name = "vddq_ddr_s0";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8_s3: dcdc-reg10 {
    regulator-name = "vcc_1v8_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   avcc_1v8_s0: pldo-reg1 {
    regulator-name = "avcc_1v8_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8_s0: pldo-reg2 {
    regulator-name = "vcc_1v8_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   avdd_1v2_s0: pldo-reg3 {
    regulator-name = "avdd_1v2_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1200000>;
    regulator-max-microvolt = <1200000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_3v3_s0: pldo-reg4 {
    regulator-name = "vcc_3v3_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vccio_sd_s0: pldo-reg5 {
    regulator-name = "vccio_sd_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   pldo6_s3: pldo-reg6 {
    regulator-name = "pldo6_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vdd_0v75_s3: nldo-reg1 {
    regulator-name = "vdd_0v75_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <750000>;
    regulator-max-microvolt = <750000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <750000>;
    };
   };

   vdd_ddr_pll_s0: nldo-reg2 {
    regulator-name = "vdd_ddr_pll_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <850000>;
    regulator-max-microvolt = <850000>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <850000>;
    };
   };

   avdd_0v75_s0: nldo-reg3 {
    regulator-name = "avdd_0v75_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <750000>;
    regulator-max-microvolt = <750000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_0v85_s0: nldo-reg4 {
    regulator-name = "vdd_0v85_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <850000>;
    regulator-max-microvolt = <850000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_0v75_s0: nldo-reg5 {
    regulator-name = "vdd_0v75_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <750000>;
    regulator-max-microvolt = <750000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };
  };
 };
};

&tsadc {
 status = "okay";
};

&u2phy0 {
 status = "okay";
};

&u2phy0_otg {
 phy-supply = <&vcc5v0_otg>;
 status = "okay";
};

&u2phy1 {
 status = "okay";
};

&u2phy1_otg {
 phy-supply = <&vcc5v0_host>;
 status = "okay";
};

&uart2 {
 pinctrl-0 = <&uart2m0_xfer>;
 status = "okay";
};

&uart9 {
 pinctrl-0 = <&uart9m0_xfer &uart9m0_ctsn &uart9m0_rtsn>;
 pinctrl-names = "default";
 uart-has-rtscts;
 status = "okay";

 bluetooth {
  compatible = "brcm,bcm43438-bt";
  clocks = <&hym8563>;
  clock-names = "lpo";
  device-wakeup-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
  pinctrl-0 = <&bt_en>, <&bt_wake_host>, <&bt_wake>;
  pinctrl-names = "default";
  shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
 };
};

&usbdp_phy0 {
 status = "okay";
};

&usbdp_phy1 {
 status = "okay";
};

&usb_host0_xhci {
 dr_mode = "host";
 status = "okay";
};

&usb_host1_xhci {
 dr_mode = "host";
 status = "okay";
};

&vop_mmu {
 status = "okay";
};

&vop {
 status = "okay";
};

&vp0 {
 vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
  reg = <ROCKCHIP_VOP2_EP_HDMI0>;
  remote-endpoint = <&hdmi0_in_vp0>;
 };
};