Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/rockchip/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 1 kB image not shown  

Quelle  rk3566-radxa-zero-3w.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include "rk3566-radxa-zero-3.dtsi"

/ {
 model = "Radxa ZERO 3W";
 compatible = "radxa,zero-3w", "rockchip,rk3566";

 aliases {
  mmc0 = &sdhci;
  mmc1 = &sdmmc0;
  mmc2 = &sdmmc1;
 };

 sdio_pwrseq: sdio-pwrseq {
  compatible = "mmc-pwrseq-simple";
  clocks = <&rk817 1>;
  clock-names = "ext_clock";
  pinctrl-names = "default";
  pinctrl-0 = <&wifi_reg_on_h>;
  post-power-on-delay-ms = <100>;
  power-off-delay-us = <5000000>;
  reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
 };
};

&pinctrl {
 bluetooth {
  bt_reg_on_h: bt-reg-on-h {
   rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  bt_wake_host_h: bt-wake-host-h {
   rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  host_wake_bt_h: host-wake-bt-h {
   rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 wifi {
  wifi_reg_on_h: wifi-reg-on-h {
   rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  wifi_wake_host_h: wifi-wake-host-h {
   rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

&sdhci {
 bus-width = <8>;
 cap-mmc-highspeed;
 max-frequency = <200000000>;
 mmc-hs200-1_8v;
 no-sd;
 no-sdio;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
 vmmc-supply = <&vcc_3v3>;
 vqmmc-supply = <&vcc_1v8>;
 status = "okay";
};

&sdmmc1 {
 bus-width = <4>;
 cap-sd-highspeed;
 cap-sdio-irq;
 keep-power-in-suspend;
 mmc-pwrseq = <&sdio_pwrseq>;
 no-mmc;
 no-sd;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
 sd-uhs-sdr104;
 vmmc-supply = <&vcc_3v3>;
 vqmmc-supply = <&vcc_1v8>;
 status = "okay";
};

&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 uart-has-rtscts;
 status = "okay";
};

[ Dauer der Verarbeitung: 0.2 Sekunden  (vorverarbeitet)  ]