Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/rockchip/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 11 kB image not shown  

Quelle  px30-evb.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
 */

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "px30.dtsi"

/ {
 model = "Rockchip PX30 EVB";
 compatible = "rockchip,px30-evb", "rockchip,px30";

 aliases {
  ethernet0 = &gmac;
  mmc0 = &sdmmc;
  mmc1 = &sdio;
  mmc2 = &emmc;
 };

 chosen {
  stdout-path = "serial5:115200n8";
 };

 adc-keys {
  compatible = "adc-keys";
  io-channels = <&saradc 2>;
  io-channel-names = "buttons";
  keyup-threshold-microvolt = <1800000>;
  poll-interval = <100>;

  button-esc {
   label = "esc";
   linux,code = <KEY_ESC>;
   press-threshold-microvolt = <1310000>;
  };

  button-home {
   label = "home";
   linux,code = <KEY_HOME>;
   press-threshold-microvolt = <624000>;
  };

  button-menu {
   label = "menu";
   linux,code = <KEY_MENU>;
   press-threshold-microvolt = <987000>;
  };

  button-down {
   label = "volume down";
   linux,code = <KEY_VOLUMEDOWN>;
   press-threshold-microvolt = <300000>;
  };

  button-up {
   label = "volume up";
   linux,code = <KEY_VOLUMEUP>;
   press-threshold-microvolt = <17000>;
  };
 };

 backlight: backlight {
  compatible = "pwm-backlight";
  pwms = <&pwm1 0 25000 0>;
  power-supply = <&vcc3v3_lcd>;
 };

 emmc_pwrseq: emmc-pwrseq {
  compatible = "mmc-pwrseq-emmc";
  pinctrl-0 = <&emmc_reset>;
  pinctrl-names = "default";
  reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
 };

 sdio_pwrseq: sdio-pwrseq {
  compatible = "mmc-pwrseq-simple";
  pinctrl-names = "default";
  pinctrl-0 = <&wifi_enable_h>;

  /*
   * On the module itself this is one of these (depending
   * on the actual card populated):
   * - SDIO_RESET_L_WL_REG_ON
   * - PDN (power down when low)
   */
  reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
 };

 vcc5v0_sys: regulator-vccsys {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };
};

&cpu0 {
 cpu-supply = <&vdd_arm>;
};

&cpu1 {
 cpu-supply = <&vdd_arm>;
};

&cpu2 {
 cpu-supply = <&vdd_arm>;
};

&cpu3 {
 cpu-supply = <&vdd_arm>;
};

&csi_dphy {
 status = "okay";
};

&display_subsystem {
 status = "okay";
};

&dsi {
 #address-cells = <1>;
 #size-cells = <0>;
 status = "okay";

 ports {
  mipi_out: port@1 {
   reg = <1>;

   mipi_out_panel: endpoint {
    remote-endpoint = <&mipi_in_panel>;
   };
  };
 };

 panel@0 {
  compatible = "xinpeng,xpp055c272";
  reg = <0>;
  backlight = <&backlight>;
  iovcc-supply = <&vcc_1v8>;
  vci-supply = <&vcc3v3_lcd>;

  port {
   mipi_in_panel: endpoint {
    remote-endpoint = <&mipi_out_panel>;
   };
  };
 };
};

&dsi_dphy {
 status = "okay";
};

&emmc {
 cap-mmc-highspeed;
 mmc-hs200-1_8v;
 non-removable;
 mmc-pwrseq = <&emmc_pwrseq>;
 vmmc-supply = <&vcc_3v0>;
 vqmmc-supply = <&vccio_flash>;
 status = "okay";
};

&gmac {
 clock_in_out = "output";
 phy-supply = <&vcc_rmii>;
 snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
 snps,reset-active-low;
 snps,reset-delays-us = <0 50000 50000>;
 status = "okay";
};

&gpu {
 mali-supply = <&vdd_log>;
 status = "okay";
};

&i2c0 {
 status = "okay";

 rk809: pmic@20 {
  compatible = "rockchip,rk809";
  reg = <0x20>;
  interrupt-parent = <&gpio0>;
  interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&pmic_int>;
  system-power-controller;
  wakeup-source;
  #clock-cells = <0>;
  clock-output-names = "xin32k";

  vcc1-supply = <&vcc5v0_sys>;
  vcc2-supply = <&vcc5v0_sys>;
  vcc3-supply = <&vcc5v0_sys>;
  vcc4-supply = <&vcc5v0_sys>;
  vcc5-supply = <&vcc3v3_sys>;
  vcc6-supply = <&vcc3v3_sys>;
  vcc7-supply = <&vcc3v3_sys>;
  vcc8-supply = <&vcc3v3_sys>;
  vcc9-supply = <&vcc5v0_sys>;

  regulators {
   vdd_log: DCDC_REG1 {
    regulator-name = "vdd_log";
    regulator-min-microvolt = <950000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <950000>;
    };
   };

   vdd_arm: DCDC_REG2 {
    regulator-name = "vdd_arm";
    regulator-min-microvolt = <950000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <950000>;
    };
   };

   vcc_ddr: DCDC_REG3 {
    regulator-name = "vcc_ddr";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vcc_3v0: vcc_rmii: DCDC_REG4 {
    regulator-name = "vcc_3v0";
    regulator-min-microvolt = <3000000>;
    regulator-max-microvolt = <3000000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3000000>;
    };
   };

   vcc3v3_sys: DCDC_REG5 {
    regulator-name = "vcc3v3_sys";
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vcc_1v0: LDO_REG1 {
    regulator-name = "vcc_1v0";
    regulator-min-microvolt = <1000000>;
    regulator-max-microvolt = <1000000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1000000>;
    };
   };

   vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
    regulator-name = "vcc_1v8";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vdd_1v0: LDO_REG3 {
    regulator-name = "vdd_1v0";
    regulator-min-microvolt = <1000000>;
    regulator-max-microvolt = <1000000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1000000>;
    };
   };

   vcc3v0_pmu: LDO_REG4 {
    regulator-name = "vcc3v0_pmu";
    regulator-min-microvolt = <3000000>;
    regulator-max-microvolt = <3000000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3000000>;
    };
   };

   vccio_sd: LDO_REG5 {
    regulator-name = "vccio_sd";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vcc_sd: LDO_REG6 {
    regulator-name = "vcc_sd";
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vcc2v8_dvp: LDO_REG7 {
    regulator-name = "vcc2v8_dvp";
    regulator-min-microvolt = <2800000>;
    regulator-max-microvolt = <2800000>;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <2800000>;
    };
   };

   vcc1v8_dvp: LDO_REG8 {
    regulator-name = "vcc1v8_dvp";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vcc1v5_dvp: LDO_REG9 {
    regulator-name = "vcc1v5_dvp";
    regulator-min-microvolt = <1500000>;
    regulator-max-microvolt = <1500000>;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <1500000>;
    };
   };

   vcc3v3_lcd: SWITCH_REG1 {
    regulator-name = "vcc3v3_lcd";
    regulator-boot-on;
   };

   vcc5v0_host: SWITCH_REG2 {
    regulator-name = "vcc5v0_host";
    regulator-always-on;
    regulator-boot-on;
   };
  };
 };
};

&i2c1 {
 status = "okay";

 sensor@d {
  compatible = "asahi-kasei,ak8963";
  reg = <0x0d>;
  gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
  vdd-supply = <&vcc3v0_pmu>;
  mount-matrix = "1", /* x0 */
          "0", /* y0 */
          "0", /* z0 */
          "0", /* x1 */
          "1", /* y1 */
          "0", /* z1 */
          "0", /* x2 */
          "0", /* y2 */
          "1"; /* z2 */
 };

 touchscreen@14 {
  compatible = "goodix,gt1151";
  reg = <0x14>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
  irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
  VDDIO-supply = <&vcc3v3_lcd>;
 };

 sensor@4c {
  compatible = "fsl,mma7660";
  reg = <0x4c>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
 };
};

&i2c2 {
 status = "okay";

 clock-frequency = <100000>;

 /* These are relatively safe rise/fall times; TODO: measure */
 i2c-scl-falling-time-ns = <50>;
 i2c-scl-rising-time-ns = <300>;

 ov5695: ov5695@36 {
  compatible = "ovti,ov5695";
  reg = <0x36>;
  avdd-supply = <&vcc2v8_dvp>;
  clocks = <&cru SCLK_CIF_OUT>;
  clock-names = "xvclk";
  dvdd-supply = <&vcc1v5_dvp>;
  dovdd-supply = <&vcc1v8_dvp>;
  pinctrl-names = "default";
  pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
  reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;

  port {
   ucam_out: endpoint {
    remote-endpoint = <&mipi_in_ucam>;
    data-lanes = <1 2>;
   };
  };
 };
};

&i2s1_2ch {
 status = "okay";
};

&io_domains {
 status = "okay";

 vccio1-supply = <&vccio_sdio>;
 vccio2-supply = <&vccio_sd>;
 vccio3-supply = <&vcc_3v0>;
 vccio4-supply = <&vcc3v0_pmu>;
 vccio5-supply = <&vcc_3v0>;
 vccio6-supply = <&vccio_flash>;
};

&isp {
 status = "okay";

 ports {
  port@0 {
   mipi_in_ucam: endpoint {
    data-lanes = <1 2>;
    remote-endpoint = <&ucam_out>;
   };
  };
 };
};

&isp_mmu {
 status = "okay";
};

&pinctrl {
 headphone {
  hp_det: hp-det {
   rockchip,pins =
    <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
  };
 };

 emmc {
  emmc_reset: emmc-reset {
   rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pmic {
  pmic_int: pmic_int {
   rockchip,pins =
    <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
  };

  soc_slppin_gpio: soc_slppin_gpio {
   rockchip,pins =
    <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
  };

  soc_slppin_slp: soc_slppin_slp {
   rockchip,pins =
    <0 RK_PA4 1 &pcfg_pull_none>;
  };

  soc_slppin_rst: soc_slppin_rst {
   rockchip,pins =
    <0 RK_PA4 2 &pcfg_pull_none>;
  };
 };

 sdio-pwrseq {
  wifi_enable_h: wifi-enable-h {
   rockchip,pins =
    <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 cif-m0 {
  cif_clkout_m0: cif-clkout-m0 {
   rockchip,pins =
    <2 RK_PB3 1 &pcfg_pull_none_12ma>;
  };
 };

 mipi {
  mipi_pdn: mipi-pdn {
   rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

&pmu_io_domains {
 status = "okay";

 pmuio1-supply = <&vcc3v0_pmu>;
 pmuio2-supply = <&vcc3v0_pmu>;
};

&pwm1 {
 status = "okay";
};

&saradc {
 vref-supply = <&vcc_1v8>;
 status = "okay";
};

&sdmmc {
 cap-mmc-highspeed;
 cap-sd-highspeed;
 card-detect-delay = <800>;
 sd-uhs-sdr12;
 sd-uhs-sdr25;
 sd-uhs-sdr50;
 sd-uhs-sdr104;
 vmmc-supply = <&vcc_sd>;
 vqmmc-supply = <&vccio_sd>;
 status = "okay";
};

&sdio {
 cap-sd-highspeed;
 keep-power-in-suspend;
 non-removable;
 mmc-pwrseq = <&sdio_pwrseq>;
 sd-uhs-sdr104;
 status = "okay";
};

&tsadc {
 rockchip,hw-tshut-mode = <1>;
 rockchip,hw-tshut-polarity = <1>;
 status = "okay";
};

&u2phy {
 status = "okay";

 u2phy_host: host-port {
  status = "okay";
 };

 u2phy_otg: otg-port {
  status = "okay";
 };
};

&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart1_xfer &uart1_cts>;
 status = "okay";
};

&uart5 {
 status = "okay";
};

&usb20_otg {
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_host0_ohci {
 status = "okay";
};

&vopb {
 status = "okay";
};

&vopb_mmu {
 status = "okay";
};

&vopl {
 status = "okay";
};

&vopl_mmu {
 status = "okay";
};

[ Dauer der Verarbeitung: 0.4 Sekunden  (vorverarbeitet)  ]