/*
* linux / arch / arm / mach - omap1 / time . c
*
* OMAP Timers
*
* Copyright ( C ) 2004 Nokia Corporation
* Partial timer rewrite and additional dynamic tick timer support by
* Tony Lindgen < tony @ atomide . com > and
* Tuukka Tikkanen < tuukka . tikkanen @ elektrobit . com >
*
* MPU timer code based on the older MPU timer code for OMAP
* Copyright ( C ) 2000 RidgeRun , Inc .
* Author : Greg Lonnon < glonnon @ ridgerun . com >
*
* This program is free software ; you can redistribute it and / or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation ; either version 2 of the License , or ( at your
* option ) any later version .
*
* THIS SOFTWARE IS PROVIDED ` ` AS IS ' ' AND ANY EXPRESS OR IMPLIED
* WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED . IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT , INDIRECT ,
* INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL DAMAGES ( INCLUDING , BUT
* NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ; LOSS OF
* USE , DATA , OR PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TORT
* ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
*
* You should have received a copy of the GNU General Public License along
* with this program ; if not , write to the Free Software Foundation , Inc . ,
* 675 Mass Ave , Cambridge , MA 02139 , USA .
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/sched_clock.h>
#include <asm /irq.h>
#include <asm /mach/irq.h>
#include <asm /mach/time.h>
#include "hardware.h"
#include "mux.h"
#include "iomap.h"
#include "common.h"
#include "clock.h"
#ifdef CONFIG_OMAP_MPU_TIMER
#define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE
#define OMAP_MPU_TIMER_OFFSET 0 x100
typedef struct {
u32 cntl; /* CNTL_TIMER, R/W */
u32 load_tim; /* LOAD_TIM, W */
u32 read_tim; /* READ_TIM, R */
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long notrace omap_mpu_timer_read(int nr)
{
omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
return readl(&timer->read_tim);
}
static inline void omap_mpu_set_autoreset(int nr)
{
omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_remove_autoreset(int nr)
{
omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
}
static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
int autoreset)
{
omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
if (autoreset)
timerflags |= MPU_TIMER_AR;
writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
udelay(1 );
writel(load_val, &timer->load_tim);
udelay(1 );
writel(timerflags, &timer->cntl);
}
static inline void omap_mpu_timer_stop(int nr)
{
omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
}
/*
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* MPU timer 1 . . . count down to zero , interrupt , reload
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*/
static int omap_mpu_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
omap_mpu_timer_start(0 , cycles, 0 );
return 0 ;
}
static int omap_mpu_set_oneshot(struct clock_event_device *evt)
{
omap_mpu_timer_stop(0 );
omap_mpu_remove_autoreset(0 );
return 0 ;
}
static int omap_mpu_set_periodic(struct clock_event_device *evt)
{
omap_mpu_set_autoreset(0 );
return 0 ;
}
static struct clock_event_device clockevent_mpu_timer1 = {
.name = "mpu_timer1" ,
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = omap_mpu_set_next_event,
.set_state_periodic = omap_mpu_set_periodic,
.set_state_oneshot = omap_mpu_set_oneshot,
};
static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_mpu_timer1;
evt->event_handler(evt);
return IRQ_HANDLED;
}
static __init void omap_init_mpu_timer(unsigned long rate)
{
if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1" , NULL))
pr_err("Failed to request irq %d (mpu_timer1)\n" , INT_TIMER1);
omap_mpu_timer_start(0 , (rate / HZ) - 1 , 1 );
clockevent_mpu_timer1.cpumask = cpumask_of(0 );
clockevents_config_and_register(&clockevent_mpu_timer1, rate,
1 , -1 );
}
/*
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* MPU timer 2 . . . free running 32 - bit clock source and scheduler clock
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*/
static u64 notrace omap_mpu_read_sched_clock(void )
{
return ~omap_mpu_timer_read(1 );
}
static void __init omap_init_clocksource(unsigned long rate)
{
omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1 );
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n" ;
omap_mpu_timer_start(1 , ~0 , 1 );
sched_clock_register(omap_mpu_read_sched_clock, 32 , rate);
if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2" , rate,
300 , 32 , clocksource_mmio_readl_down))
printk(err, "mpu_timer2" );
}
static void __init omap_mpu_timer_init(void )
{
struct clk *ck_ref = clk_get(NULL, "ck_ref" );
unsigned long rate;
BUG_ON(IS_ERR(ck_ref));
rate = clk_get_rate(ck_ref);
clk_put(ck_ref);
/* PTV = 0 */
rate /= 2 ;
omap_init_mpu_timer(rate);
omap_init_clocksource(rate);
}
#else
static inline void omap_mpu_timer_init(void )
{
pr_err("Bogus timer, should not happen\n" );
}
#endif /* CONFIG_OMAP_MPU_TIMER */
/*
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* Timer initialization
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*/
void __init omap1_timer_init(void )
{
omap1_clk_init();
omap1_mux_init();
if (omap_32k_timer_init() != 0 )
omap_mpu_timer_init();
}
Messung V0.5 in Prozent C=97 H=93 G=94
¤ Dauer der Verarbeitung: 0.7 Sekunden
(vorverarbeitet am 2026-09-28)
¤
*© Formatika GbR, Deutschland