// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright ( C ) 2004 , 2007 - 2010 , 2011 - 2012 Synopsys , Inc . ( www . synopsys . com )
*
* RajeshwarR : Dec 11 , 2007
* - - Added support for Inter Processor Interrupts
*
* Vineetg : Nov 1 st , 2007
* - - Initial Write ( Borrowed heavily from ARM )
*/
#include <linux/spinlock.h>
#include <linux/sched/mm.h>
#include <linux/interrupt.h>
#include <linux/profile.h>
#include <linux/mm.h>
#include <linux/cpu.h>
#include <linux/irq.h>
#include <linux/atomic.h>
#include <linux/cpumask.h>
#include <linux/reboot.h>
#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/of_fdt.h>
#include <asm /mach_desc.h>
#include <asm /setup.h>
#include <asm /smp.h>
#include <asm /processor.h>
#ifndef CONFIG_ARC_HAS_LLSC
arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
#endif
struct plat_smp_ops __weak plat_smp_ops;
/* XXX: per cpu ? Only needed once in early secondary boot */
struct task_struct *secondary_idle_tsk;
static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
{
unsigned long dt_root = of_get_flat_dt_root();
const char *buf;
buf = of_get_flat_dt_prop(dt_root, name, NULL);
if (!buf)
return -EINVAL;
if (cpulist_parse(buf, cpumask))
return -EINVAL;
return 0 ;
}
/*
* Read from DeviceTree and setup cpu possible mask . If there is no
* " possible - cpus " property in DeviceTree pretend all [ 0 . . NR_CPUS - 1 ] exist .
*/
static void __init arc_init_cpu_possible(void )
{
struct cpumask cpumask;
if (arc_get_cpu_map("possible-cpus" , &cpumask)) {
pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n" ,
NR_CPUS);
cpumask_setall(&cpumask);
}
if (!cpumask_test_cpu(0 , &cpumask))
panic("Master cpu (cpu[0]) is missed in cpu possible mask!" );
init_cpu_possible(&cpumask);
}
/*
* Called from setup_arch ( ) before calling setup_processor ( )
*
* - Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system .
* - Call early smp init hook . This can initialize a specific multi - core
* IP which is say common to several platforms ( hence not part of
* platform specific int_early ( ) hook )
*/
void __init smp_init_cpus(void )
{
arc_init_cpu_possible();
if (plat_smp_ops.init_early_smp)
plat_smp_ops.init_early_smp();
}
/* called from init ( ) => process 1 */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
/*
* if platform didn ' t set the present map already , do it now
* boot cpu is set to present already by init / main . c
*/
if (num_present_cpus() <= 1 )
init_cpu_present(cpu_possible_mask);
}
void __init smp_cpus_done(unsigned int max_cpus)
{
}
/*
* Default smp boot helper for Run - on - reset case where all cores start off
* together . Non - masters need to wait for Master to start running .
* This is implemented using a flag in memory , which Non - masters spin - wait on .
* Master sets it to cpu - id of core to " ungate " it .
*/
static volatile int wake_flag;
#ifdef CONFIG_ISA_ARCOMPACT
#define __boot_read(f) f
#define __boot_write(f, v) f = v
#else
#define __boot_read(f) arc_read_uncached_32(&f)
#define __boot_write(f, v) arc_write_uncached_32(&f, v)
#endif
static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
{
BUG_ON(cpu == 0 );
__boot_write(wake_flag, cpu);
}
void arc_platform_smp_wait_to_boot(int cpu)
{
/* for halt-on-reset, we've waited already */
if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
return ;
while (__boot_read(wake_flag) != cpu)
;
__boot_write(wake_flag, 0 );
}
const char *arc_platform_smp_cpuinfo(void )
{
return plat_smp_ops.info ? : "" ;
}
/*
* The very first " C " code executed by secondary
* Called from asm stub in head . S
* " current " / R25 already setup by low level boot code
*/
void start_kernel_secondary(void )
{
struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();
/* MMU, Caches, Vector Table, Interrupts etc */
setup_processor();
mmget(mm);
mmgrab(mm);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
/* Some SMP H/w setup - for each cpu */
if (plat_smp_ops.init_per_cpu)
plat_smp_ops.init_per_cpu(cpu);
if (machine_desc->init_per_cpu)
machine_desc->init_per_cpu(cpu);
notify_cpu_starting(cpu);
set_cpu_online(cpu, true );
pr_info("## CPU%u LIVE ##: Executing Code...\n" , cpu);
local_irq_enable();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
}
/*
* Called from kernel_init ( ) - > smp_init ( ) - for each CPU
*
* At this point , Secondary Processor is " HALT " ed :
* - It booted , but was halted in head . S
* - It was configured to halt - on - reset
* So need to wake it up .
*
* Essential requirements being where to run from ( PC ) and stack ( SP )
*/
int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
unsigned long wait_till;
secondary_idle_tsk = idle;
pr_info("Idle Task [%d] %p" , cpu, idle);
pr_info("Trying to bring up CPU%u ...\n" , cpu);
if (plat_smp_ops.cpu_kick)
plat_smp_ops.cpu_kick(cpu,
(unsigned long )first_lines_of_secondary);
else
arc_default_smp_cpu_kick(cpu, (unsigned long )NULL);
/* wait for 1 sec after kicking the secondary */
wait_till = jiffies + HZ;
while (time_before(jiffies, wait_till)) {
if (cpu_online(cpu))
break ;
}
if (!cpu_online(cpu)) {
pr_info("Timeout: CPU%u FAILED to come up !!!\n" , cpu);
return -1 ;
}
secondary_idle_tsk = NULL;
return 0 ;
}
/*****************************************************************************/
/* Inter Processor Interrupt Handling */
/*****************************************************************************/
enum ipi_msg_type {
IPI_EMPTY = 0 ,
IPI_RESCHEDULE = 1 ,
IPI_CALL_FUNC,
IPI_CPU_STOP,
};
/*
* In arches with IRQ for each msg type ( above ) , receiver can use IRQ - id to
* figure out what msg was sent . For those which don ' t ( ARC has dedicated IPI
* IRQ ) , the msg - type needs to be conveyed via per - cpu data
*/
static DEFINE_PER_CPU(unsigned long , ipi_data);
static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
{
unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu);
unsigned long old, new ;
unsigned long flags;
pr_debug("%d Sending msg [%d] to %d\n" , smp_processor_id(), msg, cpu);
local_irq_save(flags);
/*
* Atomically write new msg bit ( in case others are writing too ) ,
* and read back old value
*/
do {
new = old = *ipi_data_ptr;
new |= 1 U << msg;
} while (cmpxchg(ipi_data_ptr, old, new ) != old);
/*
* Call the platform specific IPI kick function , but avoid if possible :
* Only do so if there ' s no pending msg from other concurrent sender ( s ) .
* Otherwise , receiver will see this msg as well when it takes the
* IPI corresponding to that msg . This is true , even if it is already in
* IPI handler , because ! @ old means it has not yet dequeued the msg ( s )
* so @ new msg can be a free - loader
*/
if (plat_smp_ops.ipi_send && !old)
plat_smp_ops.ipi_send(cpu);
local_irq_restore(flags);
}
static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
{
unsigned int cpu;
for_each_cpu(cpu, callmap)
ipi_send_msg_one(cpu, msg);
}
void arch_smp_send_reschedule(int cpu)
{
ipi_send_msg_one(cpu, IPI_RESCHEDULE);
}
void smp_send_stop(void )
{
struct cpumask targets;
cpumask_copy(&targets, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &targets);
ipi_send_msg(&targets, IPI_CPU_STOP);
}
void arch_send_call_function_single_ipi(int cpu)
{
ipi_send_msg_one(cpu, IPI_CALL_FUNC);
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
ipi_send_msg(mask, IPI_CALL_FUNC);
}
/*
* ipi_cpu_stop - handle IPI from smp_send_stop ( )
*/
static void ipi_cpu_stop(void )
{
machine_halt();
}
static inline int __do_IPI(unsigned long msg)
{
int rc = 0 ;
switch (msg) {
case IPI_RESCHEDULE:
scheduler_ipi();
break ;
case IPI_CALL_FUNC:
generic_smp_call_function_interrupt();
break ;
case IPI_CPU_STOP:
ipi_cpu_stop();
break ;
default :
rc = 1 ;
}
return rc;
}
/*
* arch - common ISR to handle for inter - processor interrupts
* Has hooks for platform specific IPI
*/
static irqreturn_t do_IPI(int irq, void *dev_id)
{
unsigned long pending;
unsigned long __maybe_unused copy;
pr_debug("IPI [%ld] received on cpu %d\n" ,
*this_cpu_ptr(&ipi_data), smp_processor_id());
if (plat_smp_ops.ipi_clear)
plat_smp_ops.ipi_clear(irq);
/*
* " dequeue " the msg corresponding to this IPI ( and possibly other
* piggybacked msg from elided IPIs : see ipi_send_msg_one ( ) above )
*/
copy = pending = xchg(this_cpu_ptr(&ipi_data), 0 );
do {
unsigned long msg = __ffs(pending);
int rc;
rc = __do_IPI(msg);
if (rc)
pr_info("IPI with bogus msg %ld in %ld\n" , msg, copy);
pending &= ~(1 U << msg);
} while (pending);
return IRQ_HANDLED;
}
/*
* API called by platform code to hookup arch - common ISR to their IPI IRQ
*
* Note : If IPI is provided by platform ( vs . say ARC MCIP ) , their intc setup / map
* function needs to call irq_set_percpu_devid ( ) for IPI IRQ , otherwise
* request_percpu_irq ( ) below will fail
*/
static DEFINE_PER_CPU(int , ipi_dev);
int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
{
int *dev = per_cpu_ptr(&ipi_dev, cpu);
unsigned int virq = irq_find_mapping(NULL, hwirq);
if (!virq)
panic("Cannot find virq for root domain and hwirq=%lu" , hwirq);
/* Boot cpu calls request, all call enable */
if (!cpu) {
int rc;
rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt" , dev);
if (rc)
panic("Percpu IRQ request failed for %u\n" , virq);
}
enable_percpu_irq(virq, 0 );
return 0 ;
}
Messung V0.5 in Prozent C=95 H=88 G=91
¤ Dauer der Verarbeitung: 0.11 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland