Quelle sysfs-bus-nfit Sprache: Sparc

For all of the nmem device attributes under ``nfit/*``, see the 'NVDIMM Firmware
Interface Table (NFIT)' section in the ACPI specification
(http://www.uefi.org/specifications) for more details.

What:  /sys/bus/nd/devices/nmemX/nfit/serial
Date:  Jun, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Serial number of the NVDIMM (non-volatile dual in-line
  memory module), assigned by the module vendor.

What:  /sys/bus/nd/devices/nmemX/nfit/handle
Date:  Apr, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) The address (given by the _ADR object) of the device on its
  parent bus of the NVDIMM device containing the NVDIMM region.

What:  /sys/bus/nd/devices/nmemX/nfit/device
Date:  Apr, 2015
KernelVersion: v4.1
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Device id for the NVDIMM, assigned by the module vendor.

What:  /sys/bus/nd/devices/nmemX/nfit/rev_id
Date:  Jun, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Revision of the NVDIMM, assigned by the module vendor.

What:  /sys/bus/nd/devices/nmemX/nfit/phys_id
Date:  Apr, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Handle (i.e., instance number) for the SMBIOS (system
  management BIOS) Memory Device structure describing the NVDIMM
  containing the NVDIMM region.

What:  /sys/bus/nd/devices/nmemX/nfit/flags
Date:  Jun, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) The flags in the NFIT memory device sub-structure indicate
  the state of the data on the nvdimm relative to its energy
  source or last "flush to persistence".

  The attribute is a translation of the 'NVDIMM State Flags' field
  in section 5.2.25.3 'NVDIMM Region Mapping' Structure of the
  ACPI specification 6.2.

  The health states are "save_fail", "restore_fail", "flush_fail",
  "not_armed", "smart_event", "map_fail" and "smart_notify".

What:  /sys/bus/nd/devices/nmemX/nfit/format
What:  /sys/bus/nd/devices/nmemX/nfit/format1
What:  /sys/bus/nd/devices/nmemX/nfit/formats
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) The interface codes indicate support for persistent memory
  mapped directly into system physical address space and / or a
  block aperture access mechanism to the NVDIMM media.
  The 'formats' attribute displays the number of supported
  interfaces.

  This layout is compatible with existing libndctl binaries that
  only expect one code per-dimm as they will ignore
  nmemX/nfit/formats and nmemX/nfit/formatN.

What:  /sys/bus/nd/devices/nmemX/nfit/vendor
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Vendor id of the NVDIMM.

What:  /sys/bus/nd/devices/nmemX/nfit/dsm_mask
Date:  May, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) The bitmask indicates the supported device specific control
  functions relative to the NVDIMM command family supported by the
  device

What:  /sys/bus/nd/devices/nmemX/nfit/family
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Displays the NVDIMM family command sets. Values
  0, 1, 2 and 3 correspond to NVDIMM_FAMILY_INTEL,
  NVDIMM_FAMILY_HPE1, NVDIMM_FAMILY_HPE2 and NVDIMM_FAMILY_MSFT
  respectively.

  See the specifications for these command families here:
  http://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf
  https://github.com/HewlettPackard/hpe-nvm/blob/master/Documentation/
  https://msdn.microsoft.com/library/windows/hardware/mt604741"

What:  /sys/bus/nd/devices/nmemX/nfit/id
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) ACPI specification 6.2 section 5.2.25.9, defines an
  identifier for an NVDIMM, which reflects the id attribute.

What:  /sys/bus/nd/devices/nmemX/nfit/subsystem_vendor
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Sub-system vendor id of the NVDIMM non-volatile memory
  subsystem controller.

What:  /sys/bus/nd/devices/nmemX/nfit/subsystem_rev_id
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Sub-system revision id of the NVDIMM non-volatile memory subsystem
  controller, assigned by the non-volatile memory subsystem
  controller vendor.

What:  /sys/bus/nd/devices/nmemX/nfit/subsystem_device
Date:  Apr, 2016
KernelVersion: v4.7
Contact: nvdimm@lists.linux.dev
Description:
  (RO) Sub-system device id for the NVDIMM non-volatile memory
  subsystem controller, assigned by the non-volatile memory
  subsystem controller vendor.

What:  /sys/bus/nd/devices/ndbusX/nfit/revision
Date:  Jun, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) ACPI NFIT table revision number.

What:  /sys/bus/nd/devices/ndbusX/nfit/scrub
Date:  Sep, 2016
KernelVersion: v4.9
Contact: nvdimm@lists.linux.dev
Description:
  (RW) This shows the number of full Address Range Scrubs (ARS)
  that have been completed since driver load time. Userspace can
  wait on this using select/poll etc. A '+' at the end indicates
  an ARS is in progress

  Writing a value of 1 triggers an ARS scan.

What:  /sys/bus/nd/devices/ndbusX/nfit/hw_error_scrub
Date:  Sep, 2016
KernelVersion: v4.9
Contact: nvdimm@lists.linux.dev
Description:
  (RW) Provides a way to toggle the behavior between just adding
  the address (cache line) where the MCE happened to the poison
  list and doing a full scrub. The former (selective insertion of
  the address) is done unconditionally.

  This attribute can have the following values written to it:

  '0': Switch to the default mode where an exception will only
  insert the address of the memory error into the poison and
  badblocks lists.
  '1': Enable a full scrub to happen if an exception for a memory
  error is received.

What:  /sys/bus/nd/devices/ndbusX/nfit/dsm_mask
Date:  Jun, 2017
KernelVersion: v4.13
Contact: nvdimm@lists.linux.dev
Description:
  (RO) The bitmask indicates the supported bus specific control
  functions. See the section named 'NVDIMM Root Device _DSMs' in
  the ACPI specification.

What:  /sys/bus/nd/devices/ndbusX/nfit/firmware_activate_noidle
Date:  Apr, 2020
KernelVersion: v5.8
Contact: nvdimm@lists.linux.dev
Description:
  (RW) The Intel platform implementation of firmware activate
  support exposes an option let the platform force idle devices in
  the system over the activation event, or trust that the OS will
  do it. The safe default is to let the platform force idle
  devices since the kernel is already in a suspend state, and on
  the chance that a driver does not properly quiesce bus-mastering
  after a suspend callback the platform will handle it.  However,
  the activation might abort if, for example, platform firmware
  determines that the activation time exceeds the max PCI-E
  completion timeout. Since the platform does not know whether the
  OS is running the activation from a suspend context it aborts,
  but if the system owner trusts driver suspend callback to be
  sufficient then 'firmware_activation_noidle' can be
  enabled to bypass the activation abort.

What:  /sys/bus/nd/devices/regionX/nfit/range_index
Date:  Jun, 2015
KernelVersion: v4.2
Contact: nvdimm@lists.linux.dev
Description:
  (RO) A unique number provided by the BIOS to identify an address
  range. Used by NVDIMM Region Mapping Structure to uniquely refer
  to this structure. Value of 0 is reserved and not used as an
  index.

Messung V0.5 in Prozent

¤ Dauer der Verarbeitung: 0.13 Sekunden (vorverarbeitet am 2026-09-27) ¤

Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.