/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project .
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License , v . 2 . 0 . If a copy of the MPL was not distributed with this
* file , You can obtain one at http : //mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice :
*
* Licensed to the Apache Software Foundation ( ASF ) under one or more
* contributor license agreements . See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership . The ASF licenses this file to you under the Apache
* License , Version 2 . 0 ( the " License " ) ; you may not use this file
* except in compliance with the License . You may obtain a copy of
* the License at http : //www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sal/config.h>
#include <cassert>
#include <string_view>
#include <unotools/configpaths.hxx>
#include <rtl/ustring.hxx>
#include <rtl/ustrbuf.hxx>
#include <osl/diagnose.h>
#include <o3tl/string_view.hxx>
namespace utl
{
static
void lcl_resolveCharEntities(OUString & aLocalString)
{
sal_Int32 nEscapePos=aLocalString.indexOf('&' );
if (nEscapePos < 0 ) return ;
OUStringBuffer aResult;
sal_Int32 nStart = 0 ;
do
{
sal_Unicode ch = 0 ;
if (aLocalString.match("&" ,nEscapePos))
ch = '&' ;
else if (aLocalString.match("'" ,nEscapePos))
ch = '\' ';
else if (aLocalString.match(""" ,nEscapePos))
ch = '"' ;
OSL_ENSURE(ch,"Configuration path contains '&' that is not part of a valid character escape" );
if (ch)
{
aResult.append(aLocalString.subView(nStart,nEscapePos-nStart) + OUStringChar(ch));
sal_Int32 nEscapeEnd=aLocalString.indexOf(';' ,nEscapePos);
nStart = nEscapeEnd+1 ;
nEscapePos=aLocalString.indexOf('&' ,nStart);
}
else
{
nEscapePos=aLocalString.indexOf('&' ,nEscapePos+1 );
}
}
while ( nEscapePos > 0 );
aResult.append(aLocalString.subView(nStart));
aLocalString = aResult.makeStringAndClear();
}
bool splitLastFromConfigurationPath(std::u16string_view _sInPath,
OUString& _rsOutPath,
OUString& _rsLocalName)
{
size_t nStart,nEnd;
size_t nPos = _sInPath.size();
// for backwards compatibility, strip trailing slash
if (nPos > 1 && _sInPath[ nPos - 1 ] == '/' )
{
--nPos;
}
// check for set element ['xxx'] or ["yyy"]
bool decode;
if (nPos > 0 && _sInPath[ nPos - 1 ] == ']' )
{
decode = true ;
if (nPos < 3 ) { // expect at least chQuote + chQuote + ']' at _sInPath[nPos-3..nPos-1]
goto invalid;
}
nPos -= 2 ;
sal_Unicode chQuote = _sInPath[nPos];
if (chQuote == '\' ' || chQuote == ' \"')
{
nEnd = nPos;
nPos = _sInPath.rfind(chQuote,nEnd - 1 );
if (nPos == std::u16string_view::npos) {
goto invalid;
}
nStart = nPos + 1 ;
}
else
{
goto invalid;
}
OSL_ENSURE(nPos > 0 && _sInPath[nPos - 1 ] == '[' , "Invalid config path: unmatched quotes or brackets" );
if (nPos > 1 && _sInPath[nPos - 1 ] == '[' )
// expect at least '/' + '[' at _sInPath[nPos-2..nPos-1]
{
nPos = _sInPath.rfind('/' ,nPos - 2 );
if (nPos == std::u16string_view::npos) {
goto invalid;
}
}
else
{
goto invalid;
}
}
else
{
decode = false ;
nEnd = nPos;
if (nEnd == 0 ) {
goto invalid;
}
nPos = _sInPath.rfind('/' ,nEnd - 1 );
if (nPos == std::u16string_view::npos) {
goto invalid;
}
nStart = nPos + 1 ;
}
assert( nPos != std::u16string_view::npos &&
nPos < nStart &&
nStart <= nEnd &&
nEnd <= _sInPath.size() );
assert(_sInPath[nPos] == '/' );
OSL_ENSURE(nPos != 0 , "Invalid config child path: immediate child of root" );
_rsLocalName = _sInPath.substr(nStart, nEnd-nStart);
_rsOutPath = (nPos > 0 ) ? OUString(_sInPath.substr(0 ,nPos)) : OUString();
if (decode) {
lcl_resolveCharEntities(_rsLocalName);
}
return true ;
invalid:
_rsOutPath.clear();
_rsLocalName = _sInPath;
return false ;
}
OUString extractFirstFromConfigurationPath(OUString const & _sInPath, OUString* _sOutPath)
{
sal_Int32 nSep = _sInPath.indexOf('/' );
sal_Int32 nBracket = _sInPath.indexOf('[' );
sal_Int32 nStart = nBracket + 1 ;
sal_Int32 nEnd = nSep;
if (0 <= nBracket) // found a bracket-quoted relative path
{
if (nSep < 0 || nBracket < nSep) // and the separator comes after it
{
sal_Unicode chQuote = _sInPath[nStart];
if (chQuote == '\' ' || chQuote == ' \"')
{
++nStart;
nEnd = _sInPath.indexOf(chQuote, nStart+1 );
nBracket = nEnd+1 ;
}
else
{
nEnd = _sInPath.indexOf(']' ,nStart);
nBracket = nEnd;
}
OSL_ENSURE(nEnd > nStart && _sInPath[nBracket] == ']' , "Invalid config path: improper mismatch of quote or bracket" );
OSL_ENSURE((nBracket+1 == _sInPath.getLength() && nSep == -1 ) || (_sInPath[nBracket+1 ] == '/' && nSep == nBracket+1 ), "Invalid config path: brackets not followed by slash" );
}
else // ... but our initial element name is in simple form
nStart = 0 ;
}
OUString sResult = (nEnd >= 0 ) ? _sInPath.copy(nStart, nEnd-nStart) : _sInPath;
lcl_resolveCharEntities(sResult);
if (_sOutPath != nullptr)
{
*_sOutPath = (nSep >= 0 ) ? _sInPath.copy(nSep + 1 ) : OUString();
}
return sResult;
}
// find the position after the prefix in the nested path
static sal_Int32 lcl_findPrefixEnd(std::u16string_view _sNestedPath, std::u16string_view _sPrefixPath)
{
// TODO: currently handles only exact prefix matches
size_t nPrefixLength = _sPrefixPath.size();
OSL_ENSURE(nPrefixLength == 0 || _sPrefixPath[nPrefixLength-1 ] != '/' ,
"Cannot handle slash-terminated prefix paths" );
bool bIsPrefix;
if (_sNestedPath.size() > nPrefixLength)
{
bIsPrefix = _sNestedPath[nPrefixLength] == '/' &&
o3tl::starts_with(_sNestedPath, _sPrefixPath);
++nPrefixLength;
}
else if (_sNestedPath.size() == nPrefixLength)
{
bIsPrefix = _sNestedPath == _sPrefixPath;
}
else
{
bIsPrefix = false ;
}
return bIsPrefix ? nPrefixLength : 0 ;
}
bool isPrefixOfConfigurationPath(std::u16string_view _sNestedPath,
std::u16string_view _sPrefixPath)
{
return _sPrefixPath.empty() || lcl_findPrefixEnd(_sNestedPath,_sPrefixPath) != 0 ;
}
OUString dropPrefixFromConfigurationPath(OUString const & _sNestedPath,
std::u16string_view _sPrefixPath)
{
if ( sal_Int32 nPrefixEnd = lcl_findPrefixEnd(_sNestedPath,_sPrefixPath) )
{
return _sNestedPath.copy(nPrefixEnd);
}
else
{
OSL_ENSURE(_sPrefixPath.empty(), "Path does not start with expected prefix" );
return _sNestedPath;
}
}
static
OUString lcl_wrapName(std::u16string_view _sContent, const OUString& _sType)
{
const sal_Unicode * const pBeginContent = _sContent.data();
const sal_Unicode * const pEndContent = pBeginContent + _sContent.size();
OSL_PRECOND(!_sType.isEmpty(), "Unexpected config type name: empty" );
OSL_PRECOND(pBeginContent <= pEndContent, "Invalid config name: empty" );
if (pBeginContent == pEndContent)
return _sType;
OUStringBuffer aNormalized(_sType.getLength() + _sContent.size() + 4 ); // reserve approximate size initially
// prefix: type, opening bracket and quote
aNormalized.append( _sType + "['" );
// content: copy over each char and handle escaping
for (const sal_Unicode* pCur = pBeginContent; pCur != pEndContent; ++pCur)
{
// append (escape if needed)
switch (*pCur)
{
case u'&' : aNormalized.append( "&" ); break ;
case u'\' ': aNormalized.append( "'" ); break;
case u'\"' : aNormalized.append( """ ); break ;
default : aNormalized.append( *pCur );
}
}
// suffix: closing quote and bracket
aNormalized.append( "']" );
return aNormalized.makeStringAndClear();
}
OUString wrapConfigurationElementName(std::u16string_view _sElementName)
{
return lcl_wrapName(_sElementName, u"*" _ustr );
}
OUString wrapConfigurationElementName(std::u16string_view _sElementName,
OUString const & _sTypeName)
{
// todo: check that _sTypeName is valid
return lcl_wrapName(_sElementName, _sTypeName);
}
} // namespace utl
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
Messung V0.5 in Prozent C=94 H=77 G=85
¤ Dauer der Verarbeitung: 0.2 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland