/* SPDX-License-Identifier: GPL-2.0-only */
/*
* devfreq : Generic Dynamic Voltage and Frequency Scaling ( DVFS ) Framework
* for Non - CPU Devices .
*
* Copyright ( C ) 2011 Samsung Electronics
* MyungJoo Ham < myungjoo . ham @ samsung . com >
*/
#ifndef __LINUX_DEVFREQ_H__
#define __LINUX_DEVFREQ_H__
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/pm_opp.h>
#include <linux/pm_qos.h>
/* DEVFREQ governor name */
#define DEVFREQ_GOV_SIMPLE_ONDEMAND "simple_ondemand"
#define DEVFREQ_GOV_PERFORMANCE "performance"
#define DEVFREQ_GOV_POWERSAVE "powersave"
#define DEVFREQ_GOV_USERSPACE "userspace"
#define DEVFREQ_GOV_PASSIVE "passive"
/* DEVFREQ notifier interface */
#define DEVFREQ_TRANSITION_NOTIFIER (0 )
/* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */
#define DEVFREQ_PRECHANGE (0 )
#define DEVFREQ_POSTCHANGE (1 )
/* DEVFREQ work timers */
enum devfreq_timer {
DEVFREQ_TIMER_DEFERRABLE = 0 ,
DEVFREQ_TIMER_DELAYED,
DEVFREQ_TIMER_NUM,
};
struct devfreq;
struct devfreq_governor;
struct devfreq_cpu_data;
struct thermal_cooling_device;
/**
* struct devfreq_dev_status - Data given from devfreq user device to
* governors . Represents the performance
* statistics .
* @ total_time : The total time represented by this instance of
* devfreq_dev_status
* @ busy_time : The time that the device was working among the
* total_time .
* @ current_frequency : The operating frequency .
* @ private_data : An entry not specified by the devfreq framework .
* A device and a specific governor may have their
* own protocol with private_data . However , because
* this is governor - specific , a governor using this
* will be only compatible with devices aware of it .
*/
struct devfreq_dev_status {
/* both since the last measure */
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
void *private_data;
};
/*
* The resulting frequency should be at most this . ( this bound is the
* least upper bound ; thus , the resulting freq should be lower or same )
* If the flag is not set , the resulting frequency should be at most the
* bound ( greatest lower bound )
*/
#define DEVFREQ_FLAG_LEAST_UPPER_BOUND 0 x1
/**
* struct devfreq_dev_profile - Devfreq ' s user device profile
* @ initial_freq : The operating frequency when devfreq_add_device ( ) is
* called .
* @ polling_ms : The polling interval in ms . 0 disables polling .
* @ timer : Timer type is either deferrable or delayed timer .
* @ target : The device should set its operating frequency at
* freq or lowest - upper - than - freq value . If freq is
* higher than any operable frequency , set maximum .
* Before returning , target function should set
* freq at the current frequency .
* The " flags " parameter ' s possible values are
* explained above with " DEVFREQ_FLAG_ * " macros .
* @ get_dev_status : The device should provide the current performance
* status to devfreq . Governors are recommended not to
* use this directly . Instead , governors are recommended
* to use devfreq_update_stats ( ) along with
* devfreq . last_status .
* @ get_cur_freq : The device should provide the current frequency
* at which it is operating .
* @ exit : An optional callback that is called when devfreq
* is removing the devfreq object due to error or
* from devfreq_remove_device ( ) call . If the user
* has registered devfreq - > nb at a notifier - head ,
* this is the time to unregister it .
* @ freq_table : Optional list of frequencies to support statistics
* and freq_table must be generated in ascending order .
* @ max_state : The size of freq_table .
*
* @ is_cooling_device : A self - explanatory boolean giving the device a
* cooling effect property .
* @ dev_groups : Optional device - specific sysfs attribute groups that to
* be attached to the devfreq device .
*/
struct devfreq_dev_profile {
unsigned long initial_freq;
unsigned int polling_ms;
enum devfreq_timer timer;
int (*target)(struct device *dev, unsigned long *freq, u32 flags);
int (*get_dev_status)(struct device *dev,
struct devfreq_dev_status *stat);
int (*get_cur_freq)(struct device *dev, unsigned long *freq);
void (*exit )(struct device *dev);
unsigned long *freq_table;
unsigned int max_state;
bool is_cooling_device;
const struct attribute_group **dev_groups;
};
/**
* struct devfreq_stats - Statistics of devfreq device behavior
* @ total_trans : Number of devfreq transitions .
* @ trans_table : Statistics of devfreq transitions .
* @ time_in_state : Statistics of devfreq states .
* @ last_update : The last time stats were updated .
*/
struct devfreq_stats {
unsigned int total_trans;
unsigned int *trans_table;
u64 *time_in_state;
u64 last_update;
};
/**
* struct devfreq - Device devfreq structure
* @ node : list node - contains the devices with devfreq that have been
* registered .
* @ lock : a mutex to protect accessing devfreq .
* @ dev : device registered by devfreq class . dev . parent is the device
* using devfreq .
* @ profile : device - specific devfreq profile
* @ governor : method how to choose frequency based on the usage .
* @ opp_table : Reference to OPP table of dev . parent , if one exists .
* @ nb : notifier block used to notify devfreq object that it should
* reevaluate operable frequencies . Devfreq users may use
* devfreq . nb to the corresponding register notifier call chain .
* @ work : delayed work for load monitoring .
* @ freq_table : current frequency table used by the devfreq driver .
* @ max_state : count of entry present in the frequency table .
* @ previous_freq : previously configured frequency value .
* @ last_status : devfreq user device info , performance statistics
* @ data : devfreq driver pass to governors , governor should not change it .
* @ governor_data : private data for governors , devfreq core doesn ' t touch it .
* @ user_min_freq_req : PM QoS minimum frequency request from user ( via sysfs )
* @ user_max_freq_req : PM QoS maximum frequency request from user ( via sysfs )
* @ scaling_min_freq : Limit minimum frequency requested by OPP interface
* @ scaling_max_freq : Limit maximum frequency requested by OPP interface
* @ stop_polling : devfreq polling status of a device .
* @ suspend_freq : frequency of a device set during suspend phase .
* @ resume_freq : frequency of a device set in resume phase .
* @ suspend_count : suspend requests counter for a device .
* @ stats : Statistics of devfreq device behavior
* @ transition_notifier_list : list head of DEVFREQ_TRANSITION_NOTIFIER notifier
* @ cdev : Cooling device pointer if the devfreq has cooling property
* @ nb_min : Notifier block for DEV_PM_QOS_MIN_FREQUENCY
* @ nb_max : Notifier block for DEV_PM_QOS_MAX_FREQUENCY
*
* This structure stores the devfreq information for a given device .
*
* Note that when a governor accesses entries in struct devfreq in its
* functions except for the context of callbacks defined in struct
* devfreq_governor , the governor should protect its access with the
* struct mutex lock in struct devfreq . A governor may use this mutex
* to protect its own private data in ` ` void * data ` ` as well .
*/
struct devfreq {
struct list_head node;
struct mutex lock;
struct device dev;
struct devfreq_dev_profile *profile;
const struct devfreq_governor *governor;
struct opp_table *opp_table;
struct notifier_block nb;
struct delayed_work work;
unsigned long *freq_table;
unsigned int max_state;
unsigned long previous_freq;
struct devfreq_dev_status last_status;
void *data;
void *governor_data;
struct dev_pm_qos_request user_min_freq_req;
struct dev_pm_qos_request user_max_freq_req;
unsigned long scaling_min_freq;
unsigned long scaling_max_freq;
bool stop_polling;
unsigned long suspend_freq;
unsigned long resume_freq;
atomic_t suspend_count;
/* information for device frequency transitions */
struct devfreq_stats stats;
struct srcu_notifier_head transition_notifier_list;
/* Pointer to the cooling device if used for thermal mitigation */
struct thermal_cooling_device *cdev;
struct notifier_block nb_min;
struct notifier_block nb_max;
};
struct devfreq_freqs {
unsigned long old;
unsigned long new ;
};
#if defined (CONFIG_PM_DEVFREQ)
struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data);
int devfreq_remove_device(struct devfreq *devfreq);
struct devfreq *devm_devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data);
void devm_devfreq_remove_device(struct device *dev, struct devfreq *devfreq);
/* Supposed to be called by PM callbacks */
int devfreq_suspend_device(struct devfreq *devfreq);
int devfreq_resume_device(struct devfreq *devfreq);
void devfreq_suspend(void );
void devfreq_resume(void );
/* update_devfreq() - Reevaluate the device and configure frequency */
int update_devfreq(struct devfreq *devfreq);
/* Helper functions for devfreq user device driver with OPP. */
struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags);
int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq);
int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq);
int devm_devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq);
void devm_devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq);
int devfreq_register_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
int devfreq_unregister_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
int devm_devfreq_register_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
void devm_devfreq_unregister_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
struct devfreq *devfreq_get_devfreq_by_node(struct device_node *node);
struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
const char *phandle_name, int index);
#endif /* CONFIG_PM_DEVFREQ */
/**
* struct devfreq_simple_ondemand_data - ` ` void * data ` ` fed to struct devfreq
* and devfreq_add_device
* @ upthreshold : If the load is over this value , the frequency jumps .
* Specify 0 to use the default . Valid value = 0 to 100 .
* @ downdifferential : If the load is under upthreshold - downdifferential ,
* the governor may consider slowing the frequency down .
* Specify 0 to use the default . Valid value = 0 to 100 .
* downdifferential < upthreshold must hold .
*
* If the fed devfreq_simple_ondemand_data pointer is NULL to the governor ,
* the governor uses the default values .
*/
struct devfreq_simple_ondemand_data {
unsigned int upthreshold;
unsigned int downdifferential;
};
enum devfreq_parent_dev_type {
DEVFREQ_PARENT_DEV,
CPUFREQ_PARENT_DEV,
};
/**
* struct devfreq_passive_data - ` ` void * data ` ` fed to struct devfreq
* and devfreq_add_device
* @ parent : the devfreq instance of parent device .
* @ get_target_freq : Optional callback , Returns desired operating frequency
* for the device using passive governor . That is called
* when passive governor should decide the next frequency
* by using the new frequency of parent devfreq device
* using governors except for passive governor .
* If the devfreq device has the specific method to decide
* the next frequency , should use this callback .
* @ parent_type : the parent type of the device .
* @ this : the devfreq instance of own device .
* @ nb : the notifier block for DEVFREQ_TRANSITION_NOTIFIER or
* CPUFREQ_TRANSITION_NOTIFIER list .
* @ cpu_data_list : the list of cpu frequency data for all cpufreq_policy .
*
* The devfreq_passive_data have to set the devfreq instance of parent
* device with governors except for the passive governor . But , don ' t need to
* initialize the ' this ' and ' nb ' field because the devfreq core will handle
* them .
*/
struct devfreq_passive_data {
/* Should set the devfreq instance of parent device */
struct devfreq *parent;
/* Optional callback to decide the next frequency of passvice device */
int (*get_target_freq)(struct devfreq *this , unsigned long *freq);
/* Should set the type of parent device */
enum devfreq_parent_dev_type parent_type;
/* For passive governor's internal use. Don't need to set them */
struct devfreq *this ;
struct notifier_block nb;
struct list_head cpu_data_list;
};
#if !defined (CONFIG_PM_DEVFREQ)
static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
{
return ERR_PTR(-ENOSYS);
}
static inline int devfreq_remove_device(struct devfreq *devfreq)
{
return 0 ;
}
static inline struct devfreq *devm_devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
{
return ERR_PTR(-ENOSYS);
}
static inline void devm_devfreq_remove_device(struct device *dev,
struct devfreq *devfreq)
{
}
static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
return 0 ;
}
static inline int devfreq_resume_device(struct devfreq *devfreq)
{
return 0 ;
}
static inline void devfreq_suspend(void ) {}
static inline void devfreq_resume(void ) {}
static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
return ERR_PTR(-EINVAL);
}
static inline int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
static inline int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
static inline int devm_devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
static inline void devm_devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
}
static inline int devfreq_register_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
return 0 ;
}
static inline int devfreq_unregister_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
return 0 ;
}
static inline int devm_devfreq_register_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
return 0 ;
}
static inline void devm_devfreq_unregister_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
}
static inline struct devfreq *devfreq_get_devfreq_by_node(struct device_node *node)
{
return ERR_PTR(-ENODEV);
}
static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
const char *phandle_name, int index)
{
return ERR_PTR(-ENODEV);
}
static inline int devfreq_update_stats(struct devfreq *df)
{
return -EINVAL;
}
#endif /* CONFIG_PM_DEVFREQ */
#endif /* __LINUX_DEVFREQ_H__ */
Messung V0.5 in Prozent C=95 H=100 G=97
¤ Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.0.4Bemerkung:
(vorverarbeitet am 2026-09-28)
¤
*Bot Zugriff