(Firefox Browser Version 153.0.1©)  

Quellcode-Bibliothek dwmac_lib.c  Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*******************************************************************************
  Copyright (C) 2007-2009  STMicroelectronics Ltd


  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/


#include <linux/io.h>
#include <linux/iopoll.h>
#include "common.h"
#include "dwmac_dma.h"
#include "stmmac.h"

#define GMAC_HI_REG_AE  0x80000000

int dwmac_dma_reset(void __iomem *ioaddr)
{
 u32 value = readl(ioaddr + DMA_BUS_MODE);

 /* DMA SW reset */
 value |= DMA_BUS_MODE_SFT_RESET;
 writel(value, ioaddr + DMA_BUS_MODE);

 return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
     !(value & DMA_BUS_MODE_SFT_RESET),
     10000, 200000);
}

/* CSR1 enables the transmit DMA to check for new descriptor */
void dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan)
{
 writel(1, ioaddr + DMA_CHAN_XMT_POLL_DEMAND(chan));
}

void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
     u32 chan, bool rx, bool tx)
{
 u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));

 if (rx)
  value |= DMA_INTR_DEFAULT_RX;
 if (tx)
  value |= DMA_INTR_DEFAULT_TX;

 writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
}

void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
      u32 chan, bool rx, bool tx)
{
 u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));

 if (rx)
  value &= ~DMA_INTR_DEFAULT_RX;
 if (tx)
  value &= ~DMA_INTR_DEFAULT_TX;

 writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
}

void dwmac_dma_start_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
   u32 chan)
{
 u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 value |= DMA_CONTROL_ST;
 writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
}

void dwmac_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan)
{
 u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 value &= ~DMA_CONTROL_ST;
 writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
}

void dwmac_dma_start_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
   u32 chan)
{
 u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 value |= DMA_CONTROL_SR;
 writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
}

void dwmac_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan)
{
 u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 value &= ~DMA_CONTROL_SR;
 writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
}

#ifdef DWMAC_DMA_DEBUG
static void show_tx_process_state(unsigned int status)
{
 unsigned int state;
 state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;

 switch (state) {
 case 0:
  pr_debug("- TX (Stopped): Reset or Stop command\n");
  break;
 case 1:
  pr_debug("- TX (Running): Fetching the Tx desc\n");
  break;
 case 2:
  pr_debug("- TX (Running): Waiting for end of tx\n");
  break;
 case 3:
  pr_debug("- TX (Running): Reading the data "
         "and queuing the data into the Tx buf\n");
  break;
 case 6:
  pr_debug("- TX (Suspended): Tx Buff Underflow "
         "or an unavailable Transmit descriptor\n");
  break;
 case 7:
  pr_debug("- TX (Running): Closing Tx descriptor\n");
  break;
 default:
  break;
 }
}

static void show_rx_process_state(unsigned int status)
{
 unsigned int state;
 state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;

 switch (state) {
 case 0:
  pr_debug("- RX (Stopped): Reset or Stop command\n");
  break;
 case 1:
  pr_debug("- RX (Running): Fetching the Rx desc\n");
  break;
 case 2:
  pr_debug("- RX (Running): Checking for end of pkt\n");
  break;
 case 3:
  pr_debug("- RX (Running): Waiting for Rx pkt\n");
  break;
 case 4:
  pr_debug("- RX (Suspended): Unavailable Rx buf\n");
  break;
 case 5:
  pr_debug("- RX (Running): Closing Rx descriptor\n");
  break;
 case 6:
  pr_debug("- RX(Running): Flushing the current frame"
         " from the Rx buf\n");
  break;
 case 7:
  pr_debug("- RX (Running): Queuing the Rx frame"
         " from the Rx buf into memory\n");
  break;
 default:
  break;
 }
}
#endif

int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
   struct stmmac_extra_stats *x, u32 chan, u32 dir)
{
 struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
 int ret = 0;
 /* read the status register (CSR5) */
 u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));

#ifdef DWMAC_DMA_DEBUG
 /* Enable it to monitor DMA rx/tx status in case of critical problems */
 pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status);
 show_tx_process_state(intr_status);
 show_rx_process_state(intr_status);
#endif

 if (dir == DMA_DIR_RX)
  intr_status &= DMA_STATUS_MSK_RX;
 else if (dir == DMA_DIR_TX)
  intr_status &= DMA_STATUS_MSK_TX;

 /* ABNORMAL interrupts */
 if (unlikely(intr_status & DMA_STATUS_AIS)) {
  if (unlikely(intr_status & DMA_STATUS_UNF)) {
   ret = tx_hard_error_bump_tc;
   x->tx_undeflow_irq++;
  }
  if (unlikely(intr_status & DMA_STATUS_TJT))
   x->tx_jabber_irq++;

  if (unlikely(intr_status & DMA_STATUS_OVF))
   x->rx_overflow_irq++;

  if (unlikely(intr_status & DMA_STATUS_RU))
   x->rx_buf_unav_irq++;
  if (unlikely(intr_status & DMA_STATUS_RPS))
   x->rx_process_stopped_irq++;
  if (unlikely(intr_status & DMA_STATUS_RWT))
   x->rx_watchdog_irq++;
  if (unlikely(intr_status & DMA_STATUS_ETI))
   x->tx_early_irq++;
  if (unlikely(intr_status & DMA_STATUS_TPS)) {
   x->tx_process_stopped_irq++;
   ret = tx_hard_error;
  }
  if (unlikely(intr_status & DMA_STATUS_FBI)) {
   x->fatal_bus_error_irq++;
   ret = tx_hard_error;
  }
 }
 /* TX/RX NORMAL interrupts */
 if (likely(intr_status & DMA_STATUS_NIS)) {
  if (likely(intr_status & DMA_STATUS_RI)) {
   u32 value = readl(ioaddr + DMA_INTR_ENA);
   /* to schedule NAPI on real RIE event. */
   if (likely(value & DMA_INTR_ENA_RIE)) {
    u64_stats_update_begin(&stats->syncp);
    u64_stats_inc(&stats->rx_normal_irq_n[chan]);
    u64_stats_update_end(&stats->syncp);
    ret |= handle_rx;
   }
  }
  if (likely(intr_status & DMA_STATUS_TI)) {
   u64_stats_update_begin(&stats->syncp);
   u64_stats_inc(&stats->tx_normal_irq_n[chan]);
   u64_stats_update_end(&stats->syncp);
   ret |= handle_tx;
  }
  if (unlikely(intr_status & DMA_STATUS_ERI))
   x->rx_early_irq++;
 }
 /* Optional hardware blocks, interrupts should be disabled */
 if (unlikely(intr_status &
       (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
  pr_warn("%s: unexpected status %08x\n", __func__, intr_status);

 /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
 writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);

 return ret;
}

void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
{
 u32 csr6 = readl(ioaddr + DMA_CONTROL);
 writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);

 do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
}

void stmmac_set_mac_addr(void __iomem *ioaddr, const u8 addr[6],
    unsigned int high, unsigned int low)
{
 unsigned long data;

 data = (addr[5] << 8) | addr[4];
 /* For MAC Addr registers we have to set the Address Enable (AE)
  * bit that has no effect on the High Reg 0 where the bit 31 (MO)
  * is RO.
 */

 writel(data | GMAC_HI_REG_AE, ioaddr + high);
 data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
 writel(data, ioaddr + low);
}
EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);

/* Enable disable MAC RX/TX */
void stmmac_set_mac(void __iomem *ioaddr, bool enable)
{
 u32 old_val, value;

 old_val = readl(ioaddr + MAC_CTRL_REG);
 value = old_val;

 if (enable)
  value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
 else
  value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);

 if (value != old_val)
  writel(value, ioaddr + MAC_CTRL_REG);
}

void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
    unsigned int high, unsigned int low)
{
 unsigned int hi_addr, lo_addr;

 /* Read the MAC address from the hardware */
 hi_addr = readl(ioaddr + high);
 lo_addr = readl(ioaddr + low);

 /* Extract the MAC address from the high and low words */
 addr[0] = lo_addr & 0xff;
 addr[1] = (lo_addr >> 8) & 0xff;
 addr[2] = (lo_addr >> 16) & 0xff;
 addr[3] = (lo_addr >> 24) & 0xff;
 addr[4] = hi_addr & 0xff;
 addr[5] = (hi_addr >> 8) & 0xff;
}
EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);

Messung V0.5 in Prozent
C=96 H=97 G=96

[0.7QuellennavigatorsProjekt 2026-10-02]