Quelle  BV_05_C.py

# Copyright 2023 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import hci_packets as hci
import link_layer_packets as ll
import unittest
from hci_packets import ErrorCode
from py.bluetooth import Address
from py.controller import ControllerTest


class Test(ControllerTest):

    # LL/DDI/ADV/BV-05-C [Scan Request: Undirected Connectable]
    async def test(self):
        # Test parameters.
        LL_advertiser_advInterval_MIN = 0x200
        LL_advertiser_advInterval_MAX = 0x200
        LL_advertiser_Adv_Channel_Map = 0x7
        controller = self.controller
        peer_address = Address('aa:bb:cc:dd:ee:ff')
        invalid_local_address = Address([
            controller.address.address[0] ^ 0xff, controller.address.address[1],
            controller.address.address[2], controller.address.address[3],
            controller.address.address[4], controller.address.address[5]
        ])

        # 1. Upper Tester configures undirected advertising in the IUT using all supported advertising
        # channels and a selected advertising interval between the minimum and maximum advertising
        # intervals.
        controller.send_cmd(
            hci.LeSetAdvertisingParameters(
                advertising_interval_min=LL_advertiser_advInterval_MIN,
                advertising_interval_max=LL_advertiser_advInterval_MAX,
                advertising_type=hci.AdvertisingType.ADV_IND,
                own_address_type=hci.OwnAddressType.PUBLIC_DEVICE_ADDRESS,
                advertising_channel_map=LL_advertiser_Adv_Channel_Map,
                advertising_filter_policy=hci.AdvertisingFilterPolicy.ALL_DEVICES))

        await self.expect_evt(
            hci.LeSetAdvertisingParametersComplete(status=ErrorCode.SUCCESS,
                                                   num_hci_command_packets=1))

        # 2. Configure Lower Tester to monitor the advertising and scan response procedures of the IUT. The
        # Lower Tester will send an SCAN_REQ packet on a selected supported advertising channel
        # (defined as an IXIT) and using a common public device address as parameter.

        # 3. Configure Scan Response Data in the IUT using device name length of 0 as response data.
        scan_response_data = []
        controller.send_cmd(hci.LeSetScanResponseData(advertising_data=scan_response_data))

        await self.expect_evt(
            hci.LeSetScanResponseDataComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=True))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # 4. Lower Tester sends a SCAN_REQ packet on the selected advertising channel after receiving an
        # ADV_IND packet from IUT on the advertising channel configured in step 3. The SCAN_REQ is
        # sent T_IFS after the end of an ADV_IND packet.
        # 5. Lower Tester receives a SCAN_RSP packet from the IUT addressed to the Lower Tester T_IFS
        # after the end of the request packet.
        # 6. Repeat steps 4–5 30 times or until IUT sends a SCN_RSP.
        for n in range(10):
            await self.expect_ll(
                ll.LeLegacyAdvertisingPdu(source_address=controller.address,
                                          advertising_address_type=ll.AddressType.PUBLIC,
                                          advertising_type=ll.LegacyAdvertisingType.ADV_IND,
                                          advertising_data=[]))

            controller.send_ll(ll.LeScan(source_address=peer_address,
                                         destination_address=controller.address,
                                         advertising_address_type=ll.AddressType.PUBLIC,
                                         scanning_address_type=ll.AddressType.PUBLIC),
                               rssi=-16)

            await self.expect_ll(
                ll.LeScanResponse(source_address=controller.address,
                                  destination_address=peer_address,
                                  advertising_address_type=ll.AddressType.PUBLIC,
                                  scan_response_data=scan_response_data))

        # 7. Configure Scan Response Data in the IUT using device name length of 31 as response data.
        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=False))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        scan_response_data = [31] + [0] * 30
        controller.send_cmd(hci.LeSetScanResponseData(advertising_data=scan_response_data))

        await self.expect_evt(
            hci.LeSetScanResponseDataComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=True))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # 8. Repeat steps 4–6.
        for n in range(10):
            await self.expect_ll(
                ll.LeLegacyAdvertisingPdu(source_address=controller.address,
                                          advertising_address_type=ll.AddressType.PUBLIC,
                                          advertising_type=ll.LegacyAdvertisingType.ADV_IND,
                                          advertising_data=[]))

            controller.send_ll(ll.LeScan(source_address=peer_address,
                                         destination_address=controller.address,
                                         advertising_address_type=ll.AddressType.PUBLIC,
                                         scanning_address_type=ll.AddressType.PUBLIC),
                               rssi=-16)

            await self.expect_ll(
                ll.LeScanResponse(source_address=controller.address,
                                  destination_address=peer_address,
                                  advertising_address_type=ll.AddressType.PUBLIC,
                                  scan_response_data=scan_response_data))

        # 9. Configure Lower Tester to monitor the advertising and scan response procedures of the IUT. The
        # Lower Tester will send an SCAN_REQ packet on a selected supported advertising channel
        # (defined as an IXIT) and using a public device address that differs from the IUT address in the
        # most significant octet.

        # 10. Configure Scan Response Data in the IUT using device name length of 0 as response data.
        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=False))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        scan_response_data = []
        controller.send_cmd(hci.LeSetScanResponseData(advertising_data=scan_response_data))

        await self.expect_evt(
            hci.LeSetScanResponseDataComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=True))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))
        # 11. Repeat steps 4–6.
        for n in range(10):
            await self.expect_ll(
                ll.LeLegacyAdvertisingPdu(source_address=controller.address,
                                          advertising_address_type=ll.AddressType.PUBLIC,
                                          advertising_type=ll.LegacyAdvertisingType.ADV_IND,
                                          advertising_data=[]))

            controller.send_ll(ll.LeScan(source_address=peer_address,
                                         destination_address=invalid_local_address,
                                         advertising_address_type=ll.AddressType.PUBLIC,
                                         scanning_address_type=ll.AddressType.PUBLIC),
                               rssi=-16)

        # 12. Configure Scan Response Data in the IUT using device name length of 31 as response data.
        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=False))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        scan_response_data = [31] + [0] * 30
        controller.send_cmd(hci.LeSetScanResponseData(advertising_data=scan_response_data))

        await self.expect_evt(
            hci.LeSetScanResponseDataComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        controller.send_cmd(hci.LeSetAdvertisingEnable(advertising_enable=True))

        await self.expect_evt(
            hci.LeSetAdvertisingEnableComplete(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # 13. Repeat steps 4–6.
        for n in range(10):
            await self.expect_ll(
                ll.LeLegacyAdvertisingPdu(source_address=controller.address,
                                          advertising_address_type=ll.AddressType.PUBLIC,
                                          advertising_type=ll.LegacyAdvertisingType.ADV_IND,
                                          advertising_data=[]))

            controller.send_ll(ll.LeScan(source_address=peer_address,
                                         destination_address=invalid_local_address,
                                         advertising_address_type=ll.AddressType.PUBLIC,
                                         scanning_address_type=ll.AddressType.PUBLIC),
                               rssi=-16)

        # Note: this last iteration is very redundant, not implementing it
        # to save on execution time.

        # 14. Configure Lower Tester to monitor the advertising and scan response procedures of the IUT. The
        # Lower Tester will send an SCAN_REQ packet on a selected supported advertising channel
        # (defined as an IXIT) and using a public device address that differs from the IUT address in the
        # most and least significant octets.
        # 15. Repeat steps 4–6.
        # 16. Configure Scan Response Data in the IUT using device name length of 31 as response data.
        # 17. Repeat steps 4–6.