/*
* Copyright ( C ) 2016 The Android Open Source Project
*
* Licensed under the Apache License , Version 2 . 0 ( the " License " ) ;
* you may not use this file except in compliance with the License .
* You may obtain a copy of the License at
*
* http : //www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing , software
* distributed under the License is distributed on an " AS IS " BASIS ,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND , either express or implied .
* See the License for the specific language governing permissions and
* limitations under the License .
*/
#include <sys/ptrace.h>
#include <elf.h>
#include <err.h>
#include <fcntl.h>
#include <sched.h>
#include <sys/prctl.h>
#include <sys/ptrace.h>
#include <sys/uio.h>
#include <sys/user.h>
#include <sys/wait.h>
#include <unistd.h>
#include <chrono>
#include <thread>
#include <gtest/gtest.h>
#include <android-base/macros.h>
#include <android-base/unique_fd.h>
#include "utils.h"
using namespace std::chrono_literals;
using android::base::unique_fd;
class ChildGuard {
public :
explicit ChildGuard(pid_t pid) : pid(pid) {}
~ChildGuard() {
kill(pid, SIGKILL);
int status;
TEMP_FAILURE_RETRY(waitpid(pid, &status, 0 ));
}
private :
pid_t pid;
};
enum class HwFeature { Watchpoint, Breakpoint };
static void check_hw_feature_supported(pid_t child, HwFeature feature) {
#if defined (__arm__)
errno = 0 ;
long capabilities;
long result = ptrace(PTRACE_GETHBPREGS, child, 0 , &capabilities);
if (result == -1 ) {
EXPECT_ERRNO(EIO);
GTEST_SKIP() << "Hardware debug support disabled at kernel configuration time" ;
}
uint8_t hb_count = capabilities & 0 xff;
capabilities >>= 8 ;
uint8_t wp_count = capabilities & 0 xff;
capabilities >>= 8 ;
uint8_t max_wp_size = capabilities & 0 xff;
if (max_wp_size == 0 ) {
GTEST_SKIP() << "Kernel reports zero maximum watchpoint size" ;
} else if (feature == HwFeature::Watchpoint && wp_count == 0 ) {
GTEST_SKIP() << "Kernel reports zero hardware watchpoints" ;
} else if (feature == HwFeature::Breakpoint && hb_count == 0 ) {
GTEST_SKIP() << "Kernel reports zero hardware breakpoints" ;
}
#elif defined (__aarch64__)
user_hwdebug_state dreg_state;
iovec iov;
iov.iov_base = &dreg_state;
iov.iov_len = sizeof (dreg_state);
errno = 0 ;
long result = ptrace(PTRACE_GETREGSET, child,
feature == HwFeature::Watchpoint ? NT_ARM_HW_WATCH : NT_ARM_HW_BREAK, &iov);
if (result == -1 ) {
ASSERT_ERRNO(EINVAL);
GTEST_SKIP() << "Hardware support missing" ;
} else if ((dreg_state.dbg_info & 0 xff) == 0 ) {
if (feature == HwFeature::Watchpoint) {
GTEST_SKIP() << "Kernel reports zero hardware watchpoints" ;
} else {
GTEST_SKIP() << "Kernel reports zero hardware breakpoints" ;
}
}
#else
// We assume watchpoints and breakpoints are always supported on x86.
UNUSED(child);
UNUSED(feature);
#endif
}
static void set_watchpoint(pid_t child, uintptr_t address, size_t size) {
ASSERT_EQ(0 u, address & 0 x7) << "address: " << address;
#if defined (__arm__) || defined (__aarch64__)
const unsigned byte_mask = (1 << size) - 1 ;
const unsigned type = 2 ; // Write.
const unsigned enable = 1 ;
const unsigned control = byte_mask << 5 | type << 3 | enable;
#ifdef __arm__
ASSERT_EQ(0 , ptrace(PTRACE_SETHBPREGS, child, -1 , &address)) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_SETHBPREGS, child, -2 , &control)) << strerror(errno);
#else // aarch64
user_hwdebug_state dreg_state = {};
dreg_state.dbg_regs[0 ].addr = address;
dreg_state.dbg_regs[0 ].ctrl = control;
iovec iov;
iov.iov_base = &dreg_state;
iov.iov_len = offsetof(user_hwdebug_state, dbg_regs) + sizeof (dreg_state.dbg_regs[0 ]);
ASSERT_EQ(0 , ptrace(PTRACE_SETREGSET, child, NT_ARM_HW_WATCH, &iov)) << strerror(errno);
#endif
#elif defined (__i386__) || defined (__x86_64__)
ASSERT_EQ(0 , ptrace(PTRACE_POKEUSER, child, offsetof(user, u_debugreg[0 ]), address)) << strerror(errno);
errno = 0 ;
unsigned data = ptrace(PTRACE_PEEKUSER, child, offsetof(user, u_debugreg[7 ]), nullptr);
ASSERT_ERRNO(0 );
const unsigned size_flag = (size == 8 ) ? 2 : size - 1 ;
const unsigned enable = 1 ;
const unsigned type = 1 ; // Write.
const unsigned mask = 3 << 18 | 3 << 16 | 1 ;
const unsigned value = size_flag << 18 | type << 16 | enable;
data &= mask;
data |= value;
ASSERT_EQ(0 , ptrace(PTRACE_POKEUSER, child, offsetof(user, u_debugreg[7 ]), data)) << strerror(errno);
#else
UNUSED(child);
UNUSED(address);
UNUSED(size);
#endif
}
template <typename T>
static void run_watchpoint_test(std::function<void (T&)> child_func, size_t offset, size_t size) {
alignas(16 ) T data{};
pid_t child = fork();
ASSERT_NE(-1 , child) << strerror(errno);
if (child == 0 ) {
// Extra precaution: make sure we go away if anything happens to our parent.
if (prctl(PR_SET_PDEATHSIG, SIGKILL, 0 , 0 , 0 ) == -1 ) {
perror("prctl(PR_SET_PDEATHSIG)" );
_exit (1 );
}
if (ptrace(PTRACE_TRACEME, 0 , nullptr, nullptr) == -1 ) {
perror("ptrace(PTRACE_TRACEME)" );
_exit (2 );
}
child_func(data);
_exit (0 );
}
ChildGuard guard(child);
int status;
ASSERT_EQ(child, TEMP_FAILURE_RETRY(waitpid(child, &status, __WALL))) << strerror(errno);
ASSERT_TRUE(WIFSTOPPED(status)) << "Status was: " << status;
ASSERT_EQ(SIGSTOP, WSTOPSIG(status)) << "Status was: " << status;
check_hw_feature_supported(child, HwFeature::Watchpoint);
if (::testing::Test::IsSkipped()) {
return ;
}
set_watchpoint(child, uintptr_t(untag_address(&data)) + offset, size);
ASSERT_EQ(0 , ptrace(PTRACE_CONT, child, nullptr, nullptr)) << strerror(errno);
ASSERT_EQ(child, TEMP_FAILURE_RETRY(waitpid(child, &status, __WALL))) << strerror(errno);
ASSERT_TRUE(WIFSTOPPED(status)) << "Status was: " << status;
ASSERT_EQ(SIGTRAP, WSTOPSIG(status)) << "Status was: " << status;
siginfo_t siginfo;
ASSERT_EQ(0 , ptrace(PTRACE_GETSIGINFO, child, nullptr, &siginfo)) << strerror(errno);
ASSERT_EQ(TRAP_HWBKPT, siginfo.si_code);
#if defined (__arm__) || defined (__aarch64__)
ASSERT_LE(&data, siginfo.si_addr);
ASSERT_GT((&data) + 1 , siginfo.si_addr);
#endif
}
template <typename T>
static void watchpoint_stress_child(unsigned cpu, T& data) {
cpu_set_t cpus;
CPU_ZERO(&cpus);
CPU_SET(cpu, &cpus);
if (sched_setaffinity(0 , sizeof cpus, &cpus) == -1 ) {
perror("sched_setaffinity" );
_exit (3 );
}
raise(SIGSTOP); // Synchronize with the tracer, let it set the watchpoint.
data = 1 ; // Now trigger the watchpoint.
}
template <typename T>
static void run_watchpoint_stress(size_t cpu) {
run_watchpoint_test<T>(std::bind(watchpoint_stress_child<T>, cpu, std::placeholders::_1 ), 0 ,
sizeof (T));
}
// Test watchpoint API. The test is considered successful if our watchpoints get hit OR the
// system reports that watchpoint support is not present. We run the test for different
// watchpoint sizes, while pinning the process to each cpu in turn, for better coverage.
TEST(sys_ptrace, watchpoint_stress) {
cpu_set_t available_cpus;
ASSERT_EQ(0 , sched_getaffinity(0 , sizeof available_cpus, &available_cpus));
for (size_t cpu = 0 ; cpu < CPU_SETSIZE; ++cpu) {
if (!CPU_ISSET(cpu, &available_cpus)) continue ;
run_watchpoint_stress<uint8_t>(cpu);
if (::testing::Test::IsSkipped()) {
// Only check first case, since all others would skip for same reason.
return ;
}
run_watchpoint_stress<uint16_t>(cpu);
run_watchpoint_stress<uint32_t>(cpu);
#if defined (__LP64__)
run_watchpoint_stress<uint64_t>(cpu);
#endif
}
}
struct Uint128_t {
uint64_t data[2 ];
};
static void watchpoint_imprecise_child(Uint128_t& data) {
raise(SIGSTOP); // Synchronize with the tracer, let it set the watchpoint.
#if defined (__i386__) || defined (__x86_64__)
asm volatile ("movdqa %%xmm0, %0" : : "m" (data));
#elif defined (__arm__)
asm volatile ("stm %0, { r0, r1, r2, r3 }" : : "r" (&data));
#elif defined (__aarch64__)
asm volatile ("stp x0, x1, %0" : : "m" (data));
#elif defined (__riscv)
UNUSED(data);
GTEST_LOG_(INFO) << "missing riscv64 instruction to store > 64 bits in one instruction" ;
#endif
}
// Test that the kernel is able to handle the case when the instruction writes
// to a larger block of memory than the one we are watching. If you see this
// test fail on arm64, you will likely need to cherry-pick fdfeff0f into your
// kernel.
TEST(sys_ptrace, watchpoint_imprecise) {
// This test relies on the infrastructure to timeout if the test hangs.
run_watchpoint_test<Uint128_t>(watchpoint_imprecise_child, 8 , sizeof (void *));
}
static void __attribute__((noinline)) breakpoint_func() {
asm volatile ("" );
}
static void __attribute__((noreturn)) breakpoint_fork_child() {
// Extra precaution: make sure we go away if anything happens to our parent.
if (prctl(PR_SET_PDEATHSIG, SIGKILL, 0 , 0 , 0 ) == -1 ) {
perror("prctl(PR_SET_PDEATHSIG)" );
_exit (1 );
}
if (ptrace(PTRACE_TRACEME, 0 , nullptr, nullptr) == -1 ) {
perror("ptrace(PTRACE_TRACEME)" );
_exit (2 );
}
raise(SIGSTOP); // Synchronize with the tracer, let it set the breakpoint.
breakpoint_func(); // Now trigger the breakpoint.
_exit (0 );
}
static void set_breakpoint(pid_t child) {
uintptr_t address = uintptr_t(breakpoint_func);
#if defined (__arm__) || defined (__aarch64__)
address &= ~3 ;
const unsigned byte_mask = 0 xf;
const unsigned enable = 1 ;
const unsigned control = byte_mask << 5 | enable;
#ifdef __arm__
ASSERT_EQ(0 , ptrace(PTRACE_SETHBPREGS, child, 1 , &address)) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_SETHBPREGS, child, 2 , &control)) << strerror(errno);
#else // aarch64
user_hwdebug_state dreg_state = {};
dreg_state.dbg_regs[0 ].addr = reinterpret_cast <uintptr_t>(address);
dreg_state.dbg_regs[0 ].ctrl = control;
iovec iov;
iov.iov_base = &dreg_state;
iov.iov_len = offsetof(user_hwdebug_state, dbg_regs) + sizeof (dreg_state.dbg_regs[0 ]);
ASSERT_EQ(0 , ptrace(PTRACE_SETREGSET, child, NT_ARM_HW_BREAK, &iov)) << strerror(errno);
#endif
#elif defined (__i386__) || defined (__x86_64__)
ASSERT_EQ(0 , ptrace(PTRACE_POKEUSER, child, offsetof(user, u_debugreg[0 ]), address))
<< strerror(errno);
errno = 0 ;
unsigned data = ptrace(PTRACE_PEEKUSER, child, offsetof(user, u_debugreg[7 ]), nullptr);
ASSERT_ERRNO(0 );
const unsigned size = 0 ;
const unsigned enable = 1 ;
const unsigned type = 0 ; // Execute
const unsigned mask = 3 << 18 | 3 << 16 | 1 ;
const unsigned value = size << 18 | type << 16 | enable;
data &= mask;
data |= value;
ASSERT_EQ(0 , ptrace(PTRACE_POKEUSER, child, offsetof(user, u_debugreg[7 ]), data))
<< strerror(errno);
#else
UNUSED(child);
UNUSED(address);
#endif
}
// Test hardware breakpoint API. The test is considered successful if the breakpoints get hit OR the
// system reports that hardware breakpoint support is not present.
TEST(sys_ptrace, hardware_breakpoint) {
pid_t child = fork();
ASSERT_NE(-1 , child) << strerror(errno);
if (child == 0 ) breakpoint_fork_child();
ChildGuard guard(child);
int status;
ASSERT_EQ(child, TEMP_FAILURE_RETRY(waitpid(child, &status, __WALL))) << strerror(errno);
ASSERT_TRUE(WIFSTOPPED(status)) << "Status was: " << status;
ASSERT_EQ(SIGSTOP, WSTOPSIG(status)) << "Status was: " << status;
check_hw_feature_supported(child, HwFeature::Breakpoint);
if (::testing::Test::IsSkipped()) {
return ;
}
set_breakpoint(child);
ASSERT_EQ(0 , ptrace(PTRACE_CONT, child, nullptr, nullptr)) << strerror(errno);
ASSERT_EQ(child, TEMP_FAILURE_RETRY(waitpid(child, &status, __WALL))) << strerror(errno);
ASSERT_TRUE(WIFSTOPPED(status)) << "Status was: " << status;
ASSERT_EQ(SIGTRAP, WSTOPSIG(status)) << "Status was: " << status;
siginfo_t siginfo;
ASSERT_EQ(0 , ptrace(PTRACE_GETSIGINFO, child, nullptr, &siginfo)) << strerror(errno);
ASSERT_EQ(TRAP_HWBKPT, siginfo.si_code);
}
class PtraceResumptionTest : public ::testing::Test {
public :
unique_fd worker_pipe_write;
pid_t worker = -1 ;
pid_t tracer = -1 ;
PtraceResumptionTest() {
unique_fd worker_pipe_read;
if (!android::base::Pipe(&worker_pipe_read, &worker_pipe_write)) {
err(1 , "failed to create pipe" );
}
// Second pipe to synchronize the Yama ptracer setup.
unique_fd worker_pipe_setup_read, worker_pipe_setup_write;
if (!android::base::Pipe(&worker_pipe_setup_read, &worker_pipe_setup_write)) {
err(1 , "failed to create pipe" );
}
worker = fork();
if (worker == -1 ) {
err(1 , "failed to fork worker" );
} else if (worker == 0 ) {
char buf;
// Allow the tracer process, which is not a direct process ancestor, to
// be able to use ptrace(2) on this process when Yama LSM is active.
if (prctl(PR_SET_PTRACER, PR_SET_PTRACER_ANY, 0 , 0 , 0 ) == -1 ) {
// if Yama is off prctl(PR_SET_PTRACER) returns EINVAL - don't log in this
// case since it's expected behaviour.
if (errno != EINVAL) {
err(1 , "prctl(PR_SET_PTRACER, PR_SET_PTRACER_ANY) failed for pid %d" , getpid());
}
}
worker_pipe_setup_write.reset();
worker_pipe_write.reset();
TEMP_FAILURE_RETRY(read(worker_pipe_read.get(), &buf, sizeof (buf)));
exit (0 );
} else {
// Wait until the Yama ptracer is setup.
char buf;
worker_pipe_setup_write.reset();
TEMP_FAILURE_RETRY(read(worker_pipe_setup_read.get(), &buf, sizeof (buf)));
}
}
~PtraceResumptionTest() override {
}
void AssertDeath(int signo);
void StartTracer(std::function<void ()> f) {
tracer = fork();
ASSERT_NE(-1 , tracer);
if (tracer == 0 ) {
f();
if (HasFatalFailure()) {
exit (1 );
}
exit (0 );
}
}
bool WaitForTracer() {
if (tracer == -1 ) {
errx(1 , "tracer not started" );
}
int result;
pid_t rc = TEMP_FAILURE_RETRY(waitpid(tracer, &result, 0 ));
if (rc != tracer) {
fprintf(stderr, "waitpid returned %d: %m\n" , rc);
return false ;
}
if (!WIFEXITED(result) && !WIFSIGNALED(result)) {
printf("!WIFEXITED && !WIFSIGNALED\n" );
return false ;
}
if (WIFEXITED(result)) {
if (WEXITSTATUS(result) != 0 ) {
printf("tracer failed\n" );
return false ;
}
}
return true ;
}
bool WaitForWorker() {
if (worker == -1 ) {
errx(1 , "worker not started" );
}
int result;
pid_t rc = TEMP_FAILURE_RETRY(waitpid(worker, &result, WNOHANG));
if (rc != 0 ) {
printf("worker exited prematurely\n" );
return false ;
}
worker_pipe_write.reset();
rc = TEMP_FAILURE_RETRY(waitpid(worker, &result, 0 ));
if (rc != worker) {
fprintf(stderr, "waitpid for worker returned %d: %m\n" , rc);
return false ;
}
if (!WIFEXITED(result)) {
printf("worker didn't exit\n" );
return false ;
}
if (WEXITSTATUS(result) != 0 ) {
printf("worker exited with status %d\n" , WEXITSTATUS(result));
return false ;
}
return true ;
}
};
static void wait_for_ptrace_stop(pid_t pid) {
while (true ) {
int status;
pid_t rc = TEMP_FAILURE_RETRY(waitpid(pid, &status, __WALL));
if (rc != pid) {
abort();
}
if (WIFSTOPPED(status)) {
return ;
}
}
}
TEST_F(PtraceResumptionTest, smoke) {
// Make sure that the worker doesn't exit before the tracer stops tracing.
StartTracer([this ]() {
ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_INTERRUPT, worker, 0 , 0 )) << strerror(errno);
wait_for_ptrace_stop(worker);
std::this_thread::sleep_for(500 ms);
});
worker_pipe_write.reset();
std::this_thread::sleep_for(250 ms);
int result;
ASSERT_EQ(0 , TEMP_FAILURE_RETRY(waitpid(worker, &result, WNOHANG)));
ASSERT_TRUE(WaitForTracer());
ASSERT_EQ(worker, TEMP_FAILURE_RETRY(waitpid(worker, &result, 0 )));
}
TEST_F(PtraceResumptionTest, seize) {
StartTracer([this ]() { ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno); });
ASSERT_TRUE(WaitForTracer());
ASSERT_TRUE(WaitForWorker());
}
TEST_F(PtraceResumptionTest, seize_interrupt) {
StartTracer([this ]() {
ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_INTERRUPT, worker, 0 , 0 )) << strerror(errno);
wait_for_ptrace_stop(worker);
});
ASSERT_TRUE(WaitForTracer());
ASSERT_TRUE(WaitForWorker());
}
TEST_F(PtraceResumptionTest, seize_interrupt_cont) {
StartTracer([this ]() {
ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_INTERRUPT, worker, 0 , 0 )) << strerror(errno);
wait_for_ptrace_stop(worker);
ASSERT_EQ(0 , ptrace(PTRACE_CONT, worker, 0 , 0 )) << strerror(errno);
});
ASSERT_TRUE(WaitForTracer());
ASSERT_TRUE(WaitForWorker());
}
TEST_F(PtraceResumptionTest, zombie_seize) {
StartTracer([this ]() { ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno); });
ASSERT_TRUE(WaitForWorker());
ASSERT_TRUE(WaitForTracer());
}
TEST_F(PtraceResumptionTest, zombie_seize_interrupt) {
StartTracer([this ]() {
ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_INTERRUPT, worker, 0 , 0 )) << strerror(errno);
wait_for_ptrace_stop(worker);
});
ASSERT_TRUE(WaitForWorker());
ASSERT_TRUE(WaitForTracer());
}
TEST_F(PtraceResumptionTest, zombie_seize_interrupt_cont) {
StartTracer([this ]() {
ASSERT_EQ(0 , ptrace(PTRACE_SEIZE, worker, 0 , 0 )) << strerror(errno);
ASSERT_EQ(0 , ptrace(PTRACE_INTERRUPT, worker, 0 , 0 )) << strerror(errno);
wait_for_ptrace_stop(worker);
ASSERT_EQ(0 , ptrace(PTRACE_CONT, worker, 0 , 0 )) << strerror(errno);
});
ASSERT_TRUE(WaitForWorker());
ASSERT_TRUE(WaitForTracer());
}
Messung V0.5 in Prozent C=89 H=91 G=89
¤ Dauer der Verarbeitung: 0.12 Sekunden
(vorverarbeitet am 2026-06-28)
¤
*© Formatika GbR, Deutschland