SSL dml171.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML171.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "DML171.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1996-05-09 EMBEDDED COBOL LANGUAGE
      * SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * DML171.PCO
      * WRITTEN BY:  David Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      * Code taken from DML147 test 0842
      *
      * This routine tests Intermediate SQL.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.2 Intermediate SQL
      *   ANSI SQL-1992
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  en PIC  X(3).
       01  ct PIC  X(15).
       01  sl PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, dml171.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0882 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0882"
             DISPLAY " More full outer join"
             DISPLAY "References:"
             DISPLAY " F#40 -- Full outer join"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "CREATE TABLE STAFF66 ("
             DISPLAY " SALARY INTEGER,"
             DISPLAY " EMPNAME CHAR(20),"
             DISPLAY " GRADE DECIMAL,"
             DISPLAY " EMPNUM CHAR(3));"
             EXEC SQL CREATE TABLE STAFF66 (
               SALARY   INTEGER,
               EMPNAME CHAR(20),
               GRADE   DECIMAL,
               EMPNUM  CHAR(3)) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFF66"
             DISPLAY " SELECT GRADE*1000, EMPNAME, GRADE, EMPNUM"
             DISPLAY " FROM HU.STAFF3 WHERE EMPNUM > 'E2';"
             EXEC SQL INSERT INTO STAFF66
               SELECT GRADE*1000, EMPNAME, GRADE, EMPNUM
               FROM HU.STAFF3 WHERE EMPNUM > 'E2' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "UPDATE HU.STAFF3 SET EMPNUM = 'E6' WHERE EMPNUM =
      -    " 'E5';"
             EXEC SQL UPDATE HU.STAFF3 SET EMPNUM = 'E6' WHERE EMPNUM =
             'E5' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "UPDATE HU.STAFF3 SET EMPNAME = 'Ali' WHERE GRADE =
      -    " 12;"
             EXEC SQL UPDATE HU.STAFF3 SET EMPNAME = 'Ali' WHERE GRADE =
             12 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *FULL OUTER JOIN of tables with unique data in the joined column

             DISPLAY "DECLARE C14736 CURSOR FOR"
             DISPLAY " SELECT EMPNUM, CITY, SALARY"
             DISPLAY " FROM HU.STAFF3 FULL OUTER JOIN STAFF66 USING
      -    " (EMPNUM)"
             DISPLAY " ORDER BY EMPNUM;"
             EXEC SQL DECLARE C14736 CURSOR FOR
               SELECT EMPNUM, CITY, SALARY
               FROM HU.STAFF3 FULL OUTER JOIN STAFF66 USING (EMPNUM)
               ORDER BY EMPNUM END-EXEC

             DISPLAY "OPEN C14736;"
             EXEC SQL OPEN C14736 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE "xxx" TO en
             MOVE "xxxxxxxxxxxxxxx" TO ct
             MOVE 0 TO indic1
             DISPLAY "FETCH C14736 INTO :en, :ct, :sl:indic1;"
             EXEC SQL FETCH C14736 INTO :en, :ct, :sl:indic1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "en should be 'E1 '; its value is '", en, "'"
             DISPLAY "ct should be 'Deale '; its value is '",
             ct, "'"
             DISPLAY "indic1 should be -1; its value is ", indic1
             if (en  NOT  =   "E1 "  OR  ct  NOT  =   "Deale ")
             then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO en
             MOVE "xxxxxxxxxxxxxxx" TO ct
             MOVE 0 TO indic1
             DISPLAY "FETCH C14736 INTO :en, :ct, :sl:indic1;"
             EXEC SQL FETCH C14736 INTO :en, :ct, :sl:indic1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "en should be 'E2 '; its value is '", en, "'"
             DISPLAY "ct should be 'Vienna '; its value is '",
             ct, "'"
             DISPLAY "indic1 should be -1; its value is ", indic1
             if (en  NOT  =   "E2 "  OR  ct  NOT  =   "Vienna ")
             then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO en
             MOVE "xxxxxxxxxxxxxxx" TO ct
             MOVE 0 TO sl
             COMPUTE indic1 = -1
             DISPLAY "FETCH C14736 INTO :en, :ct, :sl:indic1;"
             EXEC SQL FETCH C14736 INTO :en, :ct, :sl:indic1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "en should be 'E3 '; its value is '", en, "'"
             DISPLAY "ct should be 'Vienna '; its value is '",
             ct, "'"
             DISPLAY "sl should be 13000; its value is ", sl
             DISPLAY "indic1 should be 0; its value is ", indic1
             if (en  NOT  =   "E3 "  OR  ct  NOT  =   "Vienna ")
             then
               MOVE 0 TO flag
             END-IF
             if (sl  NOT =  13000  OR  indic1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO en
             MOVE "xxxxxxxxxxxxxxx" TO ct
             MOVE 0 TO sl
             COMPUTE indic1 = -1
             DISPLAY "FETCH C14736 INTO :en, :ct, :sl:indic1;"
             EXEC SQL FETCH C14736 INTO :en, :ct, :sl:indic1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "en should be 'E4 '; its value is '", en, "'"
             DISPLAY "ct should be 'Deale '; its value is '",
             ct, "'"
             DISPLAY "sl should be 12000; its value is ", sl
             DISPLAY "indic1 should be 0; its value is ", indic1
             if (en  NOT  =   "E4 "  OR  ct  NOT  =   "Deale ")
             then
               MOVE 0 TO flag
             END-IF
             if (sl  NOT =  12000  OR  indic1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO en
             MOVE "xxxxxxxxxxxxxxx" TO ct
             MOVE 0 TO sl
             MOVE 0 TO indic1
             DISPLAY "FETCH C14736 INTO :en, :ct:indic1, :sl;"
             EXEC SQL FETCH C14736 INTO :en, :ct:indic1, :sl END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "en should be 'E5 '; its value is '", en, "'"
             DISPLAY "sl should be 13000; its value is ", sl
             DISPLAY "indic1 should be -1; its value is ", indic1
             if (en  NOT  =   "E5 ") then
               MOVE 0 TO flag
             END-IF
             if (sl  NOT =  13000  OR  indic1  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO en
             MOVE "xxxxxxxxxxxxxxx" TO ct
             MOVE 0 TO indic1
             DISPLAY "FETCH C14736 INTO :en, :ct, :sl:indic1;"
             EXEC SQL FETCH C14736 INTO :en, :ct, :sl:indic1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "en should be 'E6 '; its value is '", en, "'"
             DISPLAY "ct should be 'Akron '; its value is '",
             ct, "'"
             DISPLAY "indic1 should be -1; its value is ", indic1
             if (en  NOT  =   "E6 "  OR  ct  NOT  =   "Akron ")
             then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "FETCH C14736 INTO :en, :ct, :sl:indic1;"
             EXEC SQL FETCH C14736 INTO :en, :ct, :sl:indic1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT =  100  OR  NORMSQ  NOT  =   "02000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "02000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP TABLE STAFF66 CASCADE;"
             EXEC SQL DROP TABLE STAFF66 CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0882','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml171.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0882','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0882 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality99%

¤ Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.0.17Bemerkung: (vorverarbeitet) ¤

*Bot Zugriff

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.