Quelle dml163.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML163.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "DML163.SCO") calling SQL
      * procedures in file "DML163.MCO".

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1996-04-16 Module COBOL LANGUAGE
      * SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * DML163.SCO
      * WRITTEN BY:  David Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * This routine tests Dynamic SQL.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.2 Intermediate SQL
      *   ANSI SQL-1992
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  dstmt PIC  X(50).
       01  longst PIC  X(240).
       01  dtyp PIC  X(30).
       01  junk PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  cnt1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ecit PIC  X(15).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, dml163.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0864 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0864"
             DISPLAY " Intermediate Dynamic SQL syntax errors"
             DISPLAY "References:"
             DISPLAY " 17.6 GR.4 -- Syntax errors on
      -    " statement>"
             DISPLAY " COR2 17.6 GR.4 -- Many rules were changed"
             DISPLAY " F#1 -- Dynamic SQL"
             DISPLAY " F#26 -- CASE expression"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "It is possible that some of these statements will
      -    " be accepted"
             DISPLAY "as vendor extensions."

      *4.h  CASE statement -- Intermediate test

      *<simple case> where <case operand> and each <when operand>
      *are ?

      *This contains a compound character literal

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT'
      *    '  CASE ?'
      *    '    WHEN ? THEN 5'
      *    '    ELSE 4'
      *    '  END'
      *    '  FROM HU.ECCO'
      *    );
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB5" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
             DISPLAY "longst=""", longst, """"

             DISPLAY "PREPARE S1631 FROM :longst;"
      *  EXEC SQL PREPARE S1631 FROM :longst;
             CALL "SUB6" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

      *<case abbreviation> where each operand is ?

             DISPLAY "dstmt=""SELECT COALESCE (?, ?) FROM HU.ECCO"""
             MOVE "SELECT COALESCE (?, ?) FROM HU.ECCO "
             TO dstmt

             DISPLAY "PREPARE S1632 FROM :dstmt;"
      *  EXEC SQL PREPARE S1632 FROM :dstmt;
             CALL "SUB7" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "dstmt=""SELECT NULLIF (?, ?) FROM HU.ECCO"""
             MOVE "SELECT NULLIF (?, ?) FROM HU.ECCO "
             TO dstmt

             DISPLAY "PREPARE S1633 FROM :dstmt;"
      *  EXEC SQL PREPARE S1633 FROM :dstmt;
             CALL "SUB8" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

      *4.r  <case specification> where one <result> is ? and each othe
      *<result> is either NULL or ?

      *This contains a compound character literal

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT'
      *    '  CASE EMPNUM'
      *    '    WHEN ''E1'' THEN ?'
      *    '    ELSE NULL'
      *    '  END'
      *    '  FROM HU.STAFF'
      *    );
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB11" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
             DISPLAY "longst=""", longst, """"

             DISPLAY "PREPARE S1634 FROM :longst;"
      *  EXEC SQL PREPARE S1634 FROM :longst;
             CALL "SUB12" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB13" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0864','pass','MCO');
               CALL "SUB14" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml163.mco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0864','fail','MCO');
               CALL "SUB15" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB16" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0864 ********************
      ******************** BEGIN TEST0865 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0865"
             DISPLAY " Result data types for case expressions"
             DISPLAY "References:"
             DISPLAY " F#26 -- CASE expression"
             DISPLAY " 6.9 SR.7 -- data type is set operation result
      -    " data type"
             DISPLAY " 9.3 -- set operation result data types"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *If any character string is varchar, then result is varchar.
      *If any number is approximate, then result is approximate.
      *Otherwise, result is fixed-length char and exact numeric respec

             DISPLAY "CREATE TABLE T0865 ("
             DISPLAY " C1 INT,"
             DISPLAY " C2 CHAR (10),"
             DISPLAY " C3 VARCHAR (5),"
             DISPLAY " C4 REAL,"
             DISPLAY " C5 CHAR (5),"
             DISPLAY " C6 DECIMAL (2));"
      *  EXEC SQL CREATE TABLE T0865 (
      *    C1 INT,
      *    C2 CHAR (10),
      *    C3 VARCHAR (5),
      *    C4 REAL,
      *    C5 CHAR (5),
      *    C6 DECIMAL (2));
             CALL "SUB17" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB18" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "CREATE VIEW V0865 (EXN, APXN, FXC, VC) AS"
             DISPLAY " SELECT COALESCE (C1, C6),"
             DISPLAY " COALESCE (C1, C4),"
             DISPLAY " COALESCE (C2, C5),"
             DISPLAY " COALESCE (C2, C3)"
             DISPLAY " FROM T0865;"
      *  EXEC SQL CREATE VIEW V0865 (EXN, APXN, FXC, VC) AS
      *    SELECT COALESCE (C1, C6),
      *    COALESCE (C1, C4),
      *    COALESCE (C2, C5),
      *    COALESCE (C2, C3)
      *    FROM T0865;
             CALL "SUB19" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB20" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C0865 CURSOR FOR"
             DISPLAY " SELECT DATA_TYPE, ORDINAL_POSITION"
             DISPLAY " FROM INFORMATION_SCHEMA.COLUMNS"
             DISPLAY " WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY " AND TABLE_NAME = 'V0865'"
             DISPLAY " ORDER BY ORDINAL_POSITION;"
      *  EXEC SQL DECLARE C0865 CURSOR FOR
      *    SELECT DATA_TYPE, ORDINAL_POSITION
      *    FROM INFORMATION_SCHEMA.COLUMNS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'V0865'
      *    ORDER BY ORDINAL_POSITION END-EXEC

             DISPLAY "OPEN C0865;"
      *  EXEC SQL OPEN C0865;
             CALL "SUB21" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO dtyp
             DISPLAY "FETCH C0865 INTO :dtyp, :junk;"
      *  EXEC SQL FETCH C0865 INTO :dtyp, :junk;
             CALL "SUB22" USING SQLCODE SQLSTATE dtyp junk
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "dtyp should be INTEGER, SMALLINT, NUMERIC, or
      -    " DECIMAL;"
             DISPLAY "its value is ", dtyp
             if (dtyp   =   "INTEGER") then
               GO TO P100
             END-IF
             if (dtyp   =   "SMALLINT") then
               GO TO P100
             END-IF
             if (dtyp   =   "NUMERIC") then
               GO TO P100
             END-IF
             if (dtyp   =   "DECIMAL") then
               GO TO P100
             END-IF
             MOVE 0 TO flag

           .
        P100.
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO dtyp
             DISPLAY "FETCH C0865 INTO :dtyp, :junk;"
      *  EXEC SQL FETCH C0865 INTO :dtyp, :junk;
             CALL "SUB23" USING SQLCODE SQLSTATE dtyp junk
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "dtyp should be REAL, DOUBLE PRECISION, or FLOAT;"
             DISPLAY "its value is ", dtyp
             if (dtyp   =   "REAL") then
               GO TO P101
             END-IF
             if (dtyp   =   "DOUBLE PRECISION") then
               GO TO P101
             END-IF
             if (dtyp   =   "FLOAT") then
               GO TO P101
             END-IF
             MOVE 0 TO flag

           .
        P101.
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO dtyp
             DISPLAY "FETCH C0865 INTO :dtyp, :junk;"
      *  EXEC SQL FETCH C0865 INTO :dtyp, :junk;
             CALL "SUB24" USING SQLCODE SQLSTATE dtyp junk
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "dtyp should be CHARACTER; its value is ", dtyp
             if (dtyp  NOT  =   "CHARACTER") then
               MOVE 0 TO flag
             END-IF
             if (dtyp   =   "CHARACTER V") then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO dtyp
             DISPLAY "FETCH C0865 INTO :dtyp, :junk;"
      *  EXEC SQL FETCH C0865 INTO :dtyp, :junk;
             CALL "SUB25" USING SQLCODE SQLSTATE dtyp junk
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "dtyp should be CHARACTER VARYING; its value is ",
             dtyp
             if (dtyp  NOT  =   "CHARACTER VARYING") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB26" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP TABLE T0865 CASCADE;"
      *  EXEC SQL DROP TABLE T0865 CASCADE;
             CALL "SUB27" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB28" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0865','pass','MCO');
               CALL "SUB29" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml163.mco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0865','fail','MCO');
               CALL "SUB30" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB31" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0865 ********************
      ******************** BEGIN TEST0866 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0866"
             DISPLAY " Case expressions in other than SELECT"
             DISPLAY "References:"
             DISPLAY " F#26 -- CASE expression"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "CREATE VIEW V0866 (EMPNUM, HOURS) AS"
             DISPLAY " SELECT EMPNUM,"
             DISPLAY " CASE"
             DISPLAY " WHEN PNUM = 'P2' THEN HOURS + 30"
             DISPLAY " ELSE HOURS"
             DISPLAY " END"
             DISPLAY " FROM HU.WORKS;"
      *  EXEC SQL CREATE VIEW V0866 (EMPNUM, HOURS) AS
      *    SELECT EMPNUM,
      *    CASE
      *    WHEN PNUM = 'P2' THEN HOURS + 30
      *    ELSE HOURS
      *    END
      *    FROM HU.WORKS;
             CALL "SUB32" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB33" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "UPDATE HU.STAFF"
             DISPLAY " SET CITY = NULLIF (CITY, 'Deale');"
      *  EXEC SQL UPDATE HU.STAFF
      *    SET CITY = NULLIF (CITY, 'Deale');
             CALL "SUB34" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO cnt1
             DISPLAY "SELECT COUNT(*) INTO :cnt1"
             DISPLAY " FROM HU.STAFF"
             DISPLAY " WHERE CITY IS NULL;"
      *  EXEC SQL SELECT COUNT(*) INTO :cnt1
      *    FROM HU.STAFF
      *    WHERE CITY IS NULL;
             CALL "SUB35" USING SQLCODE SQLSTATE cnt1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cnt1 should be 2; its value is ", cnt1
             if (cnt1  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO HU.STAFF VALUES ("
             DISPLAY " 'E8', 'Wally',"
             DISPLAY " CASE WHEN USER = 'FLATER' THEN 15 ELSE 10 END,"
             DISPLAY " 'Monash');"
      *  EXEC SQL INSERT INTO HU.STAFF VALUES (
      *    'E8', 'Wally',
      *    CASE WHEN USER = 'FLATER' THEN 15 ELSE 10 END,
      *    'Monash');
             CALL "SUB36" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO cnt1
             DISPLAY "SELECT COUNT(*) INTO :cnt1"
             DISPLAY " FROM HU.STAFF"
             DISPLAY " WHERE GRADE = 15;"
      *  EXEC SQL SELECT COUNT(*) INTO :cnt1
      *    FROM HU.STAFF
      *    WHERE GRADE = 15;
             CALL "SUB37" USING SQLCODE SQLSTATE cnt1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cnt1 should be 1; its value is ", cnt1
             if (cnt1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

      *ELSE NULL is implicit.

             MOVE 0 TO cnt1
             DISPLAY "SELECT COUNT(*) INTO :cnt1"
             DISPLAY " FROM HU.STAFF"
             DISPLAY " WHERE CASE GRADE"
             DISPLAY " WHEN 10 THEN 12"
             DISPLAY " WHEN 13 THEN 12"
             DISPLAY " END = 12;"
      *  EXEC SQL SELECT COUNT(*) INTO :cnt1
      *    FROM HU.STAFF
      *    WHERE CASE GRADE
      *    WHEN 10 THEN 12
      *    WHEN 13 THEN 12
      *    END = 12;
             CALL "SUB38" USING SQLCODE SQLSTATE cnt1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cnt1 should be 3; its value is ", cnt1
             if (cnt1  NOT =  3) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO cnt1
             DISPLAY "SELECT SUM(HOURS) INTO :cnt1"
             DISPLAY " FROM V0866;"
      *  EXEC SQL SELECT SUM(HOURS) INTO :cnt1
      *    FROM V0866;
             CALL "SUB39" USING SQLCODE SQLSTATE cnt1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cnt1 should be 584; its value is ", cnt1
             if (cnt1  NOT =  584) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DECLARE C0866 CURSOR FOR"
             DISPLAY " SELECT COALESCE (CITY, EMPNUM) FROM HU.STAFF"
             DISPLAY " ORDER BY 1;"
      *  EXEC SQL DECLARE C0866 CURSOR FOR
      *    SELECT COALESCE (CITY, EMPNUM) FROM HU.STAFF
      *    ORDER BY 1 END-EXEC

             DISPLAY "OPEN C0866;"
      *  EXEC SQL OPEN C0866;
             CALL "SUB40" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE "xxxxxxxxxxxxxxx" TO ecit
             DISPLAY "FETCH C0866 INTO :ecit;"
      *  EXEC SQL FETCH C0866 INTO :ecit;
             CALL "SUB41" USING SQLCODE SQLSTATE ecit
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "ecit should be 'Akron '; its value is '",
             ecit, "'"
             if (ecit  NOT  =   "Akron ") then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxx" TO ecit
             DISPLAY "FETCH C0866 INTO :ecit;"
      *  EXEC SQL FETCH C0866 INTO :ecit;
             CALL "SUB42" USING SQLCODE SQLSTATE ecit
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "ecit should be 'E1 '; its value is '",
             ecit, "'"
             if (ecit  NOT  =   "E1 ") then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxx" TO ecit
             DISPLAY "FETCH C0866 INTO :ecit;"
      *  EXEC SQL FETCH C0866 INTO :ecit;
             CALL "SUB43" USING SQLCODE SQLSTATE ecit
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "ecit should be 'E4 '; its value is '",
             ecit, "'"
             if (ecit  NOT  =   "E4 ") then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxx" TO ecit
             DISPLAY "FETCH C0866 INTO :ecit;"
      *  EXEC SQL FETCH C0866 INTO :ecit;
             CALL "SUB44" USING SQLCODE SQLSTATE ecit
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "ecit should be 'Monash '; its value is '",
             ecit, "'"
             if (ecit  NOT  =   "Monash ") then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxx" TO ecit
             DISPLAY "FETCH C0866 INTO :ecit;"
      *  EXEC SQL FETCH C0866 INTO :ecit;
             CALL "SUB45" USING SQLCODE SQLSTATE ecit
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "ecit should be 'Vienna '; its value is '",
             ecit, "'"
             if (ecit  NOT  =   "Vienna ") then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxx" TO ecit
             DISPLAY "FETCH C0866 INTO :ecit;"
      *  EXEC SQL FETCH C0866 INTO :ecit;
             CALL "SUB46" USING SQLCODE SQLSTATE ecit
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "ecit should be 'Vienna '; its value is '",
             ecit, "'"
             if (ecit  NOT  =   "Vienna ") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB47" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP VIEW V0866 CASCADE;"
      *  EXEC SQL DROP VIEW V0866 CASCADE;
             CALL "SUB48" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB49" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0866','pass','MCO');
               CALL "SUB50" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml163.mco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0866','fail','MCO');
               CALL "SUB51" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB52" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0866 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality98%

¤ Dauer der Verarbeitung: 0.18 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.