Quelle dml098.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML098.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "DML098.SCO") calling SQL
      * procedures in file "DML098.MCO".

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1993/07/13 STANDARD COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * DML098.SCO
      * WRITTEN BY:  David W. Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * This routine tests FIPS sizing for all Dynamic SQL numerics.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.1 Transitional SQL
      *                  16.6 Sizing for database constructs
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  x1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  x2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  x3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  x4 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  dstmt PIC  X(50).
       01  longst PIC  X(240).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, dml098.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0579 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0579 "
             DISPLAY " FIPS sizing, Dynamic SQL exact numerics"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
      -    " 1, 3"
             DISPLAY " 16.6 Sizing for database
      -    " constructs"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *This is here to avoid language-dependent problems.
      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'CREATE TABLE NUM4 ('      ||
      *    '  NUM4C1 NUMERIC (15),'   ||
      *    '  NUM4C2 DECIMAL (15),'   ||
      *    '  NUM4C3 INTEGER,'        ||
      *    '  NUM4C4 SMALLINT)'
      *    );
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB5" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB7" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'INSERT INTO NUM4 VALUES ( '||
      *    ' 999999999999999, 999999999999999, '||
      *    ' 999999999, 9999)'
      *    );
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB11" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB12" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB13" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'INSERT INTO NUM4 VALUES ('||
      *    ' -999999999999999, -999999999999999,'||
      *    ' -999999999, -9999)'
      *    );
             CALL "SUB14" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB15" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB16" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *Since these are exact numerics, there should be no problems
      *with the precision of + and -.

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB17" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    ' SELECT NUM4C1 - 999999999999990, NUM4C2 - '||
      *    ' 999999999999990,' ||
      *    ' NUM4C3 - 999999990, NUM4C4 FROM NUM4 '||
      *    ' WHERE NUM4C1 > 0'
      *    );
             CALL "SUB18" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB19" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE BLAT1 FROM :longst;"
      *  EXEC SQL PREPARE BLAT1 FROM :longst;
             CALL "SUB20" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE BLAT2 CURSOR FOR BLAT1;"
      *  EXEC SQL DECLARE BLAT2 CURSOR FOR BLAT1 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN BLAT2;"
      *  EXEC SQL OPEN BLAT2;
             CALL "SUB21" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             COMPUTE x2 = -1
             COMPUTE x3 = -1
             COMPUTE x4 = -1

             DISPLAY "FETCH BLAT2 INTO :x1, :x2, :x3, :x4;"
      *  EXEC SQL FETCH BLAT2 INTO :x1, :x2, :x3, :x4;
             CALL "SUB22" USING SQLCODE SQLSTATE x1 x2 x3 x4
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "x1 should be 9; its value is ", x1
             DISPLAY "x2 should be 9; its value is ", x2
             DISPLAY "x3 should be 9; its value is ", x3
             DISPLAY "x4 should be 9999; its value is ", x4

             if (x1  NOT =  9  OR  x2  NOT =  9  OR  x3  NOT =  9  OR
             x4  NOT =  9999) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE BLAT2;"
      *  EXEC SQL CLOSE BLAT2;
             CALL "SUB23" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB24" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    ' SELECT NUM4C1 + 999999999999990, NUM4C2 +'||
      *    ' 999999999999990,' ||
      *    ' NUM4C3 + 999999990, NUM4C4 FROM NUM4 WHERE'||
      *    ' NUM4C1 < 0'
      *    );
             CALL "SUB25" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB26" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE BLAT3 FROM :longst;"
      *  EXEC SQL PREPARE BLAT3 FROM :longst;
             CALL "SUB27" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE BLAT4 CURSOR FOR BLAT3;"
      *  EXEC SQL DECLARE BLAT4 CURSOR FOR BLAT3 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN BLAT4;"
      *  EXEC SQL OPEN BLAT4;
             CALL "SUB28" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             COMPUTE x2 = -1
             COMPUTE x3 = -1
             COMPUTE x4 = -1

             DISPLAY "FETCH BLAT4 INTO :x1, :x2, :x3, :x4;"
      *  EXEC SQL FETCH BLAT4 INTO :x1, :x2, :x3, :x4;
             CALL "SUB29" USING SQLCODE SQLSTATE x1 x2 x3 x4
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "x1 should be -9; its value is ", x1
             DISPLAY "x2 should be -9; its value is ", x2
             DISPLAY "x3 should be -9; its value is ", x3
             DISPLAY "x4 should be -9999; its value is ", x4

             if (x1  NOT =  -9  OR  x2  NOT =  -9  OR  x3  NOT =  -9  OR
              x4  NOT =  -9999) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE BLAT4;"
      *  EXEC SQL CLOSE BLAT4;
             CALL "SUB30" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB31" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'UPDATE NUM4 SET NUM4C1 = NUM4C1 + 999999999999990,' ||
      *    ' NUM4C2 = NUM4C2 + 999999999999990,'                ||
      *    ' NUM4C3 = NUM4C3 + 999999990 WHERE NUM4C4 < 0'
      *    );
             CALL "SUB32" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB33" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB34" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""SELECT * FROM NUM4 WHERE NUM4C4 < 0"""
             MOVE "SELECT * FROM NUM4 WHERE NUM4C4 < 0
      -    " " TO dstmt

             DISPLAY "PREPARE S098AA FROM :dstmt;"
      *  EXEC SQL PREPARE S098AA FROM :dstmt;
             CALL "SUB35" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C098AA CURSOR FOR S098AA;"
      *  EXEC SQL DECLARE C098AA CURSOR FOR S098AA END-EXEC

             DISPLAY "OPEN C098AA;"
      *  EXEC SQL OPEN C098AA;
             CALL "SUB36" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             COMPUTE x1 = -1
             COMPUTE x2 = -1
             COMPUTE x3 = -1
             COMPUTE x4 = -1
             DISPLAY "FETCH C098AA INTO :x1, :x2, :x3, :x4;"
      *  EXEC SQL FETCH C098AA INTO :x1, :x2, :x3, :x4;
             CALL "SUB37" USING SQLCODE SQLSTATE x1 x2 x3 x4
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "x1 should be -9; its value is ", x1
             DISPLAY "x2 should be -9; its value is ", x2
             DISPLAY "x3 should be -9; its value is ", x3
             DISPLAY "x4 should be -9999; its value is ", x4

             if (x1  NOT =  -9  OR  x2  NOT =  -9  OR  x3  NOT =  -9  OR
              x4  NOT =  -9999) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C098AA;"
      *  EXEC SQL CLOSE C098AA;
             CALL "SUB38" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB39" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'DELETE FROM NUM4 WHERE NUM4C1 / ? > ?' ||
      *    ' AND NUM4C2 > 999999999999998'         ||
      *    ' AND NUM4C3 / 99999 > 9999'
      *    );
             CALL "SUB40" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB41" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S098AB FROM :longst;"
      *  EXEC SQL PREPARE S098AB FROM :longst;
             CALL "SUB42" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 9999999 TO x1
             MOVE 100000009 TO x2
             DISPLAY "x1 = ", x1
             DISPLAY "x2 = ", x2
             DISPLAY "EXECUTE S098AB USING :x1, :x2;"
      *  EXEC SQL EXECUTE S098AB USING :x1, :x2;
             CALL "SUB43" USING SQLCODE SQLSTATE x1 x2
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DELETE FROM NUM4"""
             MOVE "DELETE FROM NUM4 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB44" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *The remainder of this test may make sense if you read the
      *comments in the next test, 0580.

      *Decimal precision 15:  -999999999999999 to 999999999999999.
      *To implement, need 50 bits, which can handle
      *-1125899906842623 to 1125899906842623.

      *Decimal precision 9: -999999999 to 999999999.  To implement,
      *need 30 bits, which can handle -1073741823 to 1073741823.

      *Decimal precision 4: -9999 to 9999.  To implement, need
      *14 bits, which can handle -16383 to 16383.

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB45" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    ' INSERT INTO NUM4 VALUES (562949953421313,'||
      *    ' 562949953421313,' ||
      *    ' 536870913, 8193)'
      *    );
             CALL "SUB46" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB47" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB48" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB49" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM4 WHERE ' ||
      *    '  NUM4C1 = 562949953421312 OR '   ||
      *    '  NUM4C2 = 562949953421312 OR '   ||
      *    '  NUM4C3 = 536870912 OR '         ||
      *    '  NUM4C4 = 8192'
      *    );
             CALL "SUB50" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB51" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE NEW1 FROM :longst;"
      *  EXEC SQL PREPARE NEW1 FROM :longst;
             CALL "SUB52" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE MEW1 CURSOR FOR NEW1;"
      *  EXEC SQL DECLARE MEW1 CURSOR FOR NEW1 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN MEW1;"
      *  EXEC SQL OPEN MEW1;
             CALL "SUB53" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "FETCH MEW1 INTO :x1;"
      *  EXEC SQL FETCH MEW1 INTO :x1;
             CALL "SUB54" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be 0; its value is ", x1
             if (x1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE MEW1;"
      *  EXEC SQL CLOSE MEW1;
             CALL "SUB55" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB56" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM4 WHERE ' ||
      *    '  NUM4C1 = 562949953421313 AND'   ||
      *    '  NUM4C2 = 562949953421313 AND'   ||
      *    '  NUM4C3 = 536870913 AND'         ||
      *    '  NUM4C4 = 8193'
      *    );
             CALL "SUB57" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB58" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE NEW2 FROM :longst;"
      *  EXEC SQL PREPARE NEW2 FROM :longst;
             CALL "SUB59" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE MEW2 CURSOR FOR NEW2;"
      *  EXEC SQL DECLARE MEW2 CURSOR FOR NEW2 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN MEW2;"
      *  EXEC SQL OPEN MEW2;
             CALL "SUB60" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "FETCH MEW2 INTO :x1;"
      *  EXEC SQL FETCH MEW2 INTO :x1;
             CALL "SUB61" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be 1; its value is ", x1
             if (x1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE MEW2;"
      *  EXEC SQL CLOSE MEW2;
             CALL "SUB62" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB63" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM4 WHERE ' ||
      *    '  NUM4C1 = 562949953421314 OR '   ||
      *    '  NUM4C2 = 562949953421314 OR '   ||
      *    '  NUM4C3 = 536870914 OR '         ||
      *    '  NUM4C4 = 8194'
      *    );
             CALL "SUB64" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB65" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE NEW3 FROM :longst;"
      *  EXEC SQL PREPARE NEW3 FROM :longst;
             CALL "SUB66" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE MEW3 CURSOR FOR NEW3;"
      *  EXEC SQL DECLARE MEW3 CURSOR FOR NEW3 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN MEW3;"
      *  EXEC SQL OPEN MEW3;
             CALL "SUB67" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "FETCH MEW3 INTO :x1;"
      *  EXEC SQL FETCH MEW3 INTO :x1;
             CALL "SUB68" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be 0; its value is ", x1
             if (x1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE MEW3;"
      *  EXEC SQL CLOSE MEW3;
             CALL "SUB69" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *FINIS

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB70" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             DISPLAY "dstmt=""DROP TABLE NUM4 CASCADE"""
             MOVE "DROP TABLE NUM4 CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB71" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB72" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0579','pass','MCO');
               CALL "SUB73" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml098.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0579','fail','MCO');
               CALL "SUB74" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB75" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0579 ********************
      ******************** BEGIN TEST0580 *******************
             MOVE 1 TO flag

      *Loss of significant digits is detected using the database's
      *own equality operator.  This should avoid some lossage problems
      *that affected earlier sizing tests.

             DISPLAY " TEST0580 "
             DISPLAY "FIPS sizing, Dynamic SQL approximate numerics"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
      -    " 1, 3"
             DISPLAY " 16.6 Sizing for database
      -    " constructs"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *This is here to avoid language-dependent problems.
      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB76" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'CREATE TABLE NUM5 ('        ||
      *    '  NUM5C1 FLOAT (20),'       ||
      *    '  NUM5C2 REAL,'             ||
      *    '  NUM5C3 DOUBLE PRECISION)'
      *    );
             CALL "SUB77" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB78" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB79" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB80" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB81" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *1000000000000000001 (correct answer) = 2^18 + 1 = 262145
      *1000000000000000000 (truncated)      = 262144
      *1000000000000000010 (rounded)        = 262146

      *The precise values to which it gets rounded or truncated do
      *not matter; the test will work as planned provided that the
      *numbers above and below the target value get the same kind
      *of treatment.  For example, if it gets rounded up to 525000,
      *the number one greater should also get rounded up to 525000,
      *and they should pass equality, causing the test to fail.  A
      *similar argument applies to truncation.

      *2^28 = 268435456

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB82" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'INSERT INTO NUM5 VALUES (262145E+0,' ||
      *    ' 262145E+0, 268435457E+0)'
      *    );
             CALL "SUB83" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB84" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
      *  EXEC SQL EXECUTE IMMEDIATE :longst;
             CALL "SUB85" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB86" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM5 WHERE ' ||
      *    '  NUM5C1 = 262144E+0 OR '         ||
      *    '  NUM5C2 = 262144E+0 OR '         ||
      *    '  NUM5C3 = 268435456E+0'
      *    );
             CALL "SUB87" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB88" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE BLAT5 FROM :longst;"
      *  EXEC SQL PREPARE BLAT5 FROM :longst;
             CALL "SUB89" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE BLAT6 CURSOR FOR BLAT5;"
      *  EXEC SQL DECLARE BLAT6 CURSOR FOR BLAT5 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN BLAT6;"
      *  EXEC SQL OPEN BLAT6;
             CALL "SUB90" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "FETCH BLAT6 INTO :x1;"
      *  EXEC SQL FETCH BLAT6 INTO :x1;
             CALL "SUB91" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be 0; its value is ", x1
             if (x1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE BLAT6;"
      *  EXEC SQL CLOSE BLAT6;
             CALL "SUB92" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB93" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM5 WHERE ' ||
      *    '  NUM5C1 = 262145E+0 AND'         ||
      *    '  NUM5C2 = 262145E+0 AND'         ||
      *    '  NUM5C3 = 268435457E+0'
      *    );
             CALL "SUB94" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB95" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE BLAT7 FROM :longst;"
      *  EXEC SQL PREPARE BLAT7 FROM :longst;
             CALL "SUB96" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE BLAT8 CURSOR FOR BLAT7;"
      *  EXEC SQL DECLARE BLAT8 CURSOR FOR BLAT7 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN BLAT8;"
      *  EXEC SQL OPEN BLAT8;
             CALL "SUB97" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "FETCH BLAT8 INTO :x1;"
      *  EXEC SQL FETCH BLAT8 INTO :x1;
             CALL "SUB98" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be 1; its value is ", x1
             if (x1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE BLAT8;"
      *  EXEC SQL CLOSE BLAT8;
             CALL "SUB99" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB100" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM5 WHERE ' ||
      *    '  NUM5C1 = 262146E+0 OR '         ||
      *    '  NUM5C2 = 262146E+0 OR '         ||
      *    '  NUM5C3 = 268435458E+0'
      *    );
             CALL "SUB101" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB102" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE BLAT9 FROM :longst;"
      *  EXEC SQL PREPARE BLAT9 FROM :longst;
             CALL "SUB103" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE BLAT10 CURSOR FOR BLAT9;"
      *  EXEC SQL DECLARE BLAT10 CURSOR FOR BLAT9 END-EXEC

             DISPLAY  " "

             DISPLAY "OPEN BLAT10;"
      *  EXEC SQL OPEN BLAT10;
             CALL "SUB104" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "FETCH BLAT10 INTO :x1;"
      *  EXEC SQL FETCH BLAT10 INTO :x1;
             CALL "SUB105" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be 0; its value is ", x1
             if (x1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE BLAT10;"
      *  EXEC SQL CLOSE BLAT10;
             CALL "SUB106" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *Check for high-order truncation

      *  EXEC SQL DELETE FROM CONCATBUF;
             CALL "SUB107" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL INSERT INTO CONCATBUF VALUES (
      *    'SELECT COUNT(*) FROM NUM5 WHERE ' ||
      *    '  NUM5C1 / 512.0 >= 512.0 AND'    ||
      *    '  NUM5C2 / 512.0 >= 512.0 AND'    ||
      *    '  NUM5C3 / 16384.0 >= 16384.0'
      *    );
             CALL "SUB108" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
             CALL "SUB109" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S098BA FROM :longst;"
      *  EXEC SQL PREPARE S098BA FROM :longst;
             CALL "SUB110" USING SQLCODE SQLSTATE longst
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C098BA CURSOR FOR S098BA;"
      *  EXEC SQL DECLARE C098BA CURSOR FOR S098BA END-EXEC

             DISPLAY "OPEN C098BA;"
      *  EXEC SQL OPEN C098BA;
             CALL "SUB111" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO x1
             DISPLAY "FETCH C098BA INTO :x1;"
      *  EXEC SQL FETCH C098BA INTO :x1;
             CALL "SUB112" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "x1 should be 1; its value is ", x1
             if (x1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

      *FINIS

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB113" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DROP TABLE NUM5 CASCADE"""
             MOVE "DROP TABLE NUM5 CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB114" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB115" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0580','pass','MCO');
               CALL "SUB116" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml098.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0580','fail','MCO');
               CALL "SUB117" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB118" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0580 ********************
      ******************** BEGIN TEST0586 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0586 "
             DISPLAY " Sizing of FLOAT in a descriptor (dynamic)"
             DISPLAY "References:"
             DISPLAY " F# 1 -- Dynamic SQL"
             DISPLAY " F# 3 -- Basic schema manipulation"
             DISPLAY " FIPS 16.6 -- Sizing for database constructs"
             DISPLAY " 17.8 -- "
             DISPLAY " 17.4 -- "
             DISPLAY " 6.1 SR.21 -- FLOAT has binary precision"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "dstmt=""CREATE TABLE BREAKFAST (CE FLOAT)"""
             MOVE "CREATE TABLE BREAKFAST (CE FLOAT) "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB119" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB120" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ALLOCATE DESCRIPTOR 'ICHK';"
      *  EXEC SQL ALLOCATE DESCRIPTOR 'ICHK';
             CALL "SUB121" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""SELECT CE FROM BREAKFAST"""
             MOVE "SELECT CE FROM BREAKFAST "
             TO dstmt

             DISPLAY "PREPARE ZEKE FROM :dstmt;"
      *  EXEC SQL PREPARE ZEKE FROM :dstmt;
             CALL "SUB122" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DESCRIBE ZEKE USING SQL DESCRIPTOR 'ICHK';"
      *  EXEC SQL DESCRIBE ZEKE USING SQL DESCRIPTOR 'ICHK';
             CALL "SUB123" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE x1 = -1
             DISPLAY "GET DESCRIPTOR 'ICHK' VALUE 1 :x1 = PRECISION;"
      *  EXEC SQL GET DESCRIPTOR 'ICHK' VALUE 1 :x1 = PRECISION
      * ;
             CALL "SUB124" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "x1 should be >= 20; its value is ", x1
             if (x1  <  20) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB125" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             DISPLAY "dstmt=""DROP TABLE BREAKFAST CASCADE"""
             MOVE "DROP TABLE BREAKFAST CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB126" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB127" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0586','pass','MCO');
               CALL "SUB128" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml098.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0586','fail','MCO');
               CALL "SUB129" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB130" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0586 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality100%

¤ Dauer der Verarbeitung: 0.34 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.