Quelle cdr010.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR010.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "CDR010.SCO") calling SQL
      * procedures in file "CDR010.MCO"

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1989/04/07 STANDARD COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * CDR010.SCO
      * WRITTEN BY: SUN DAJUN
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      *   THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
      * SQL.
      *
      * REFERENCES
      *       AMERICAN NATIONAL STANDARD database language - SQL
      *                          with Integrity Enhancement
      *
      *            SECTION 6.7 <referential constraint definition>
      *               <referential constraint definition>::=
      *                     FOREIGN KEY (<referencing columns>)
      *                     <references specification>
      *               <references specification>::=
      *                     REFERENCES <referenced table and columns>
      *               <referencing columns>::=
      *                       <reference column list>
      *               <refereced table and columns>::=
      *                       <table name>((<reference column list>
      *               <reference column list>::=
      *                       <column name>({,<column name>}...)
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  EMPNO1 PIC  X(2).
       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
      * EXEC SQL END DECLARE SECTION END-EXEC

       01  code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC X(18).

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

      * date_time declaration *
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).

       PROCEDURE DIVISION.
       P0.

           MOVE "SUN" TO uid
           CALL "AUTHID" USING uid
           MOVE "not logged in, not" TO uidx
           CALL "AUTHCK" USING SQLCODE uidx
           MOVE SQLCODE TO SQL-COD
           if (uid NOT = uidx) then
            DISPLAY "ERROR: User " uid " expected."
            DISPLAY "User " uidx " connected."
            DISPLAY " "
            STOP RUN
           END-IF

           MOVE 0 TO errcnt
           DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, cdr010.sco"
           DISPLAY " "
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
           DISPLAY " "
      * date_time print *
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
      ******************** BEGIN TEST0332 *******************

      *This test  inserts  a row  (E8,Alice,12,Deale,E1) in
      *TABLE -- STAFF_C, there have been such value (*,*,*,*,E1)
      *and (E1,*,*,*,*) in STAFF_C

           DISPLAY " TEST0332 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " INSERT INTO STAFF_C"
           DISPLAY " VALUES('E8','Alice',12,'Deale','E1');"
           DISPLAY  " "
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO:count1"
           DISPLAY " FROM STAFF_C"
           DISPLAY " WHERE MGR = 'E1';"

      * EXEC SQL INSERT INTO STAFF_C
      *  VALUES('E8','Alice',12,'Deale','E1') END-EXEC
           CALL "SUB1" USING SQLCODE
           MOVE SQLCODE TO SQL-COD

           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO:count1
      *  FROM STAFF_C
      *  WHERE MGR = 'E1' END-EXEC
           CALL "SUB2" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB3" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " SQLCODE is equal to 0."
           DISPLAY " count1 is 3"
           DISPLAY " Your answer is :"
           DISPLAY " SQLCOD of second insert is ", code1
           DISPLAY " count1 is ", count1
           if (code1  =  0  AND  count1  =  3) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0332','pass','MCO') END-EXEC
             CALL "SUB4" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0332','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB5" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr010.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB6" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0332 ************************

      ******************** BEGIN TEST0333 *********************
      *This test deletes a row (E1,-,-,-,-) from PRIMARY KEY
      *TABLE -- STAFF_C, but there are such rows (*,*,*,*,E1)
      *in STAFF_C, this should be an ERROR.

           DISPLAY " TEST0333 "
           DISPLAY " REFERENTIAL INTEGRITY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF_C"
           DISPLAY " WHERE EMPNUM='E1';"
           DISPLAY  " "
           DISPLAY "code1 = SQLCODE"
           DISPLAY  " "
           DISPLAY " SELECT EMPNUM INTO :EMPNO1"
           DISPLAY " FROM STAFF_C"
           DISPLAY " WHERE EMPNUM = 'E1';"

      * EXEC SQL DELETE FROM STAFF_C
      *  WHERE EMPNUM='E1' END-EXEC
           CALL "SUB7" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
           MOVE "NV" TO EMPNO1
      * EXEC SQL SELECT EMPNUM INTO :EMPNO1
      *  FROM STAFF_C
      *  WHERE EMPNUM = 'E1' END-EXEC
           CALL "SUB8" USING SQLCODE EMPNO1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB9" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct result is code1 not equal to 0"
           DISPLAY " EMPNO1 = E1"
           DISPLAY " Your answer is code1=", code1
           DISPLAY " EMPNO1 =", EMPNO1
           if (code1  NOT =  0  AND  EMPNO1   =   "E1") then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0333','pass','MCO') END-EXEC
             CALL "SUB10" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0333','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB11" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr010.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB12" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ****************** END TEST0333 ********************

      ******************** BEGIN TEST0334 *********************
      *This test updates a row (E6,-,-,-,-) to (E9,-,-,-,-)
      *in TABLE -- STAFF_C, there is no such rows (*,*,*,*,E6)
      *in STAFF_C

           DISPLAY " TEST0334 "
           DISPLAY " REFERENTIAL INTEGRITY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " UPDATE STAFF_C"
           DISPLAY " SET EMPNUM = 'E9'"
           DISPLAY " WHERE EMPNUM = 'E6';"
           DISPLAY  " "
           DISPLAY "code1 = SQLCODE"
           DISPLAY  " "
           DISPLAY " SELECT EMPNUM INTO :EMPNO1"
           DISPLAY " FROM STAFF_C"
           DISPLAY " WHERE EMPNUM = 'E9';"

      * EXEC SQL UPDATE STAFF_C
      *  SET MGR = NULL END-EXEC
           CALL "SUB13" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL DELETE FROM STAFF_C;
           CALL "SUB14" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL INSERT INTO STAFF_C
      *  VALUES('E1','Alice',12,'Deale',NULL) END-EXEC
           CALL "SUB15" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL UPDATE STAFF_C
      *  SET EMPNUM = 'E9'
      *  WHERE EMPNUM = 'E1' END-EXEC
           CALL "SUB16" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
           MOVE "NV" TO EMPNO1
      * EXEC SQL SELECT EMPNUM INTO :EMPNO1
      *  FROM STAFF_C
      *  WHERE EMPNUM = 'E9' END-EXEC
           CALL "SUB17" USING SQLCODE EMPNO1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB18" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct result is code1 equal to 0"
           DISPLAY " EMPNUM = E9"
           DISPLAY " Your answer is code1=", code1
           DISPLAY " EMPNUM = ", EMPNO1
           if (code1  =  0  AND  (EMPNO1   =   "E9")) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0334','pass','MCO') END-EXEC
             CALL "SUB19" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0334','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB20" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr010.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB21" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ****************** END TEST0334 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

quality100%

¤ Dauer der Verarbeitung: 0.16 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.