/* SPDX-License-Identifier: GPL-2.0-only */
/*
* rt286.h -- RT286 ALSA SoC audio driver
*
* Copyright 2011 Realtek Microelectronics
* Author: Johnny Hsu <johnnyhsu@realtek.com>
*/
#ifndef __RT286_H__
#define __RT286_H__
#define VERB_CMD(V, N, D) ((N << 20 ) | (V << 8 ) | D)
#define RT286_AUDIO_FUNCTION_GROUP 0 x01
#define RT286_DAC_OUT1 0 x02
#define RT286_DAC_OUT2 0 x03
#define RT286_ADC_IN1 0 x09
#define RT286_ADC_IN2 0 x08
#define RT286_MIXER_IN 0 x0b
#define RT286_MIXER_OUT1 0 x0c
#define RT286_MIXER_OUT2 0 x0d
#define RT286_DMIC1 0 x12
#define RT286_DMIC2 0 x13
#define RT286_SPK_OUT 0 x14
#define RT286_MIC1 0 x18
#define RT286_LINE1 0 x1a
#define RT286_BEEP 0 x1d
#define RT286_SPDIF 0 x1e
#define RT286_VENDOR_REGISTERS 0 x20
#define RT286_HP_OUT 0 x21
#define RT286_MIXER_IN1 0 x22
#define RT286_MIXER_IN2 0 x23
#define RT286_SET_PIN_SFT 6
#define RT286_SET_PIN_ENABLE 0 x40
#define RT286_SET_PIN_DISABLE 0
#define RT286_SET_EAPD_HIGH 0 x2
#define RT286_SET_EAPD_LOW 0
#define RT286_MUTE_SFT 7
/* Verb commands */
#define RT286_GET_PARAM(NID, PARAM) VERB_CMD(AC_VERB_PARAMETERS, NID, PARAM)
#define RT286_SET_POWER(NID) VERB_CMD(AC_VERB_SET_POWER_STATE, NID, 0 )
#define RT286_SET_AUDIO_POWER RT286_SET_POWER(RT286_AUDIO_FUNCTION_GROUP)
#define RT286_SET_HPO_POWER RT286_SET_POWER(RT286_HP_OUT)
#define RT286_SET_SPK_POWER RT286_SET_POWER(RT286_SPK_OUT)
#define RT286_SET_DMIC1_POWER RT286_SET_POWER(RT286_DMIC1)
#define RT286_SPK_MUX\
VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_SPK_OUT, 0 )
#define RT286_HPO_MUX\
VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_HP_OUT, 0 )
#define RT286_ADC0_MUX\
VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN1, 0 )
#define RT286_ADC1_MUX\
VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN2, 0 )
#define RT286_SET_MIC1\
VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_MIC1, 0 )
#define RT286_SET_PIN_HPO\
VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_HP_OUT, 0 )
#define RT286_SET_PIN_SPK\
VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_SPK_OUT, 0 )
#define RT286_SET_PIN_DMIC1\
VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_DMIC1, 0 )
#define RT286_SPK_EAPD\
VERB_CMD(AC_VERB_SET_EAPD_BTLENABLE, RT286_SPK_OUT, 0 )
#define RT286_SET_AMP_GAIN_HPO\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0 )
#define RT286_SET_AMP_GAIN_ADC_IN1\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0 )
#define RT286_SET_AMP_GAIN_ADC_IN2\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN2, 0 )
#define RT286_GET_HP_SENSE\
VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_HP_OUT, 0 )
#define RT286_GET_MIC1_SENSE\
VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_MIC1, 0 )
#define RT286_SET_DMIC2_DEFAULT\
VERB_CMD(AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, RT286_DMIC2, 0 )
#define RT286_DACL_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0 xa000)
#define RT286_DACR_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0 x9000)
#define RT286_ADCL_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0 x6000)
#define RT286_ADCR_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0 x5000)
#define RT286_MIC_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIC1, 0 x7000)
#define RT286_SPOL_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0 xa000)
#define RT286_SPOR_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0 x9000)
#define RT286_HPOL_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0 xa000)
#define RT286_HPOR_GAIN\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0 x9000)
#define RT286_F_DAC_SWITCH\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0 x7000)
#define RT286_F_RECMIX_SWITCH\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0 x7100)
#define RT286_REC_MIC_SWITCH\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0 x7000)
#define RT286_REC_I2S_SWITCH\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0 x7100)
#define RT286_REC_LINE_SWITCH\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0 x7200)
#define RT286_REC_BEEP_SWITCH\
VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0 x7300)
#define RT286_DAC_FORMAT\
VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_DAC_OUT1, 0 )
#define RT286_ADC_FORMAT\
VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_ADC_IN1, 0 )
#define RT286_COEF_INDEX\
VERB_CMD(AC_VERB_SET_COEF_INDEX, RT286_VENDOR_REGISTERS, 0 )
#define RT286_PROC_COEF\
VERB_CMD(AC_VERB_SET_PROC_COEF, RT286_VENDOR_REGISTERS, 0 )
#define RT286_SET_GPIO_MASK\
VERB_CMD(AC_VERB_SET_GPIO_MASK, RT286_AUDIO_FUNCTION_GROUP, 0 )
#define RT286_SET_GPIO_DIRECTION\
VERB_CMD(AC_VERB_SET_GPIO_DIRECTION, RT286_AUDIO_FUNCTION_GROUP, 0 )
#define RT286_SET_GPIO_DATA\
VERB_CMD(AC_VERB_SET_GPIO_DATA, RT286_AUDIO_FUNCTION_GROUP, 0 )
/* Index registers */
#define RT286_A_BIAS_CTRL1 0 x01
#define RT286_A_BIAS_CTRL2 0 x02
#define RT286_POWER_CTRL1 0 x03
#define RT286_A_BIAS_CTRL3 0 x04
#define RT286_POWER_CTRL2 0 x08
#define RT286_I2S_CTRL1 0 x09
#define RT286_I2S_CTRL2 0 x0a
#define RT286_CLK_DIV 0 x0b
#define RT286_DC_GAIN 0 x0d
#define RT286_POWER_CTRL3 0 x0f
#define RT286_MIC1_DET_CTRL 0 x19
#define RT286_MISC_CTRL1 0 x20
#define RT286_GPIO_CTRL 0 x29
#define RT286_IRQ_CTRL 0 x33
#define RT286_PLL_CTRL1 0 x49
#define RT286_CBJ_CTRL1 0 x4f
#define RT286_CBJ_CTRL2 0 x50
#define RT286_PLL_CTRL 0 x63
#define RT286_DEPOP_CTRL1 0 x66
#define RT286_DEPOP_CTRL2 0 x67
#define RT286_DEPOP_CTRL3 0 x68
#define RT286_DEPOP_CTRL4 0 x69
/* SPDIF (0x06) */
#define RT286_SPDIF_SEL_SFT 0
#define RT286_SPDIF_SEL_PCM0 0
#define RT286_SPDIF_SEL_PCM1 1
#define RT286_SPDIF_SEL_SPOUT 2
#define RT286_SPDIF_SEL_PP 3
/* RECMIX (0x0b) */
#define RT286_M_REC_BEEP_SFT 0
#define RT286_M_REC_LINE1_SFT 1
#define RT286_M_REC_MIC1_SFT 2
#define RT286_M_REC_I2S_SFT 3
/* Front (0x0c) */
#define RT286_M_FRONT_DAC_SFT 0
#define RT286_M_FRONT_REC_SFT 1
/* SPK-OUT (0x14) */
#define RT286_M_SPK_MUX_SFT 14
#define RT286_SPK_SEL_MASK 0 x1
#define RT286_SPK_SEL_SFT 0
#define RT286_SPK_SEL_F 0
#define RT286_SPK_SEL_S 1
/* HP-OUT (0x21) */
#define RT286_M_HP_MUX_SFT 14
#define RT286_HP_SEL_MASK 0 x1
#define RT286_HP_SEL_SFT 0
#define RT286_HP_SEL_F 0
#define RT286_HP_SEL_S 1
/* ADC (0x22) (0x23) */
#define RT286_ADC_SEL_MASK 0 x7
#define RT286_ADC_SEL_SFT 0
#define RT286_ADC_SEL_SURR 0
#define RT286_ADC_SEL_FRONT 1
#define RT286_ADC_SEL_DMIC 2
#define RT286_ADC_SEL_BEEP 4
#define RT286_ADC_SEL_LINE1 5
#define RT286_ADC_SEL_I2S 6
#define RT286_ADC_SEL_MIC1 7
#define RT286_SCLK_S_MCLK 0
#define RT286_SCLK_S_PLL 1
enum {
RT286_AIF1,
RT286_AIF2,
RT286_AIFS,
};
#endif /* __RT286_H__ */
Messung V0.5 in Prozent C=94 H=93 G=93
¤ Dauer der Verarbeitung: 0.8 Sekunden
(vorverarbeitet am 2026-06-05)
¤
*© Formatika GbR, Deutschland