/* SPDX-License-Identifier: GPL-2.0+ */ /* * Driver for USB Mass Storage compliant devices * Unusual Devices File * * Current development and maintenance by: * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * Initial work by: * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
*/
/* * IMPORTANT NOTE: This file must be included in another file which does * the following thing for it to work: * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined * before this file is included.
*/
/* * If you edit this file, please try to keep it sorted first by VendorID, * then by ProductID. * * If you want to add an entry for this file, be sure to include the * following information: * - a patch that adds the entry for your device, including your * email address right above the entry (plus maybe a brief * explanation of the reason for the entry), * - a copy of /sys/kernel/debug/usb/devices with your device plugged in * running with this patch. * Send your submission to the USB development list <linux-usb@vger.kernel.org>
*/
/* * Note: If you add an entry only in order to set the CAPACITY_OK flag, * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is * because such entries mark devices which actually work correctly, * as opposed to devices that do something strangely or wrongly.
*/
/* * In-kernel mode switching is deprecated. Do not add new devices to * this list for the sole purpose of switching them to a different * mode. Existing userspace solutions are superior. * * New mode switching devices should instead be added to the database * maintained at https://www.draisberghof.de/usb_modeswitch/
*/
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, "HP", "Personal Media Drive",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
/* * Reported by Grant Grundler <grundler@parisc-linux.org> * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
*/
UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, "HP", "PhotoSmart R707",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
/* * Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product) * for USB floppies that need the SINGLE_LUN enforcement.
*/
UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, "NEC", "NEC USB UF000x",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Reported by Stefan Werner <dustbln@gmx.de> */
UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, "TrekStor", "i.Beat Joy 2.0",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * Reported by Andrew Nayenko <relan@bk.ru> * Updated for new firmware by Phillip Potter <phil@philpotter.co.uk>
*/
UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", "Nokia 6288",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Added by Lubomir Rintel <lkundrak@v3.sk>, a very fine chap */
UNUSUAL_DEV( 0x0421, 0x06c2, 0x0000, 0x0406, "Nokia", "Nokia 208",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* * Patch submitted by Daniel Drake <dsd@gentoo.org> * Device reports nonsense bInterfaceProtocol 6 when connected over USB2
*/
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, "Neuros Audio", "USB 2.0 HD 2.5",
USB_SC_DEVICE, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. * The key does not actually break, but it returns zero sense which * makes our SCSI stack to print confusing messages.
*/
UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, "USBest Technology", /* sold by Transcend */ "USB Mass Storage Device",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/* * Bohdan Linda <bohdan.linda@gmail.com> * 1GB USB sticks MyFlash High Speed. I have restricted * the revision to my model only
*/
UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, "USB 2.0", "Flash Disk",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
/* * Reported by Tamas Kerecsen <kerecsen@bigfoot.com> * Obviously the PROM has not been customized by the VAR; * the Vendor and Product string descriptors are: * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
*/
UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, "Mitac", "GPS",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) * Reported by Pete Zaitcev <zaitcev@redhat.com> * This device chokes on both version of MODE SENSE which we have, so * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
*/
UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, "AMI", "Virtual Floppy",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT),
/* Reported by Egbert Eich <eich@suse.com> */
UNUSUAL_DEV( 0x0480, 0xd010, 0x0100, 0x9999, "Toshiba", "External USB 3.0",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_ALWAYS_SYNC),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, "Kyocera", "Finecam S3x",
USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, "Kyocera", "Finecam S4",
USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* * Reported by Paul Stewart <stewart@wetlogic.net> * This entry is needed because the device reports Sub=ff
*/
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, "Hitachi", "DVD-CAM DZ-MV100A Camcorder",
USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
/* * BENQ DC5330 * Reported by Manuel Fombuena <mfombuena@ya.com> and * Frank Copeland <fjc@thingy.apana.org.au>
*/
UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, "Tekom Technologies, Inc", "300_CAMERA",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * Reported by Simon Levitt <simon@whattf.com> * This entry needs Sub and Proto fields
*/
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, "Epson", "875DC Storage",
USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* * Reported by Khalid Aziz <khalid@gonehiking.org> * This entry is needed because the device reports Sub=ff
*/
UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, "Epson", "785EPX Storage",
USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
/* * Reported by James Buren <braewoods+lkml@braewoods.net> * Virtual ISOs cannot be remounted if ejected while the device is locked * Disable locking to mimic Windows behavior that bypasses the issue
*/
UNUSUAL_DEV( 0x04c5, 0x2028, 0x0001, 0x0001, "iODD", "2531/2541",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
/* * Not sure who reported this originally but * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
* flag be added */
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, "Fujifilm", "FinePix 1400Zoom",
USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
/* * Reported by Ondrej Zary <linux@zary.sk> * The device reports one sector more and breaks when that sector is accessed * Firmwares older than 2.6c (the latest one and the only that claims Linux * support) have also broken tag handling
*/
UNUSUAL_DEV( 0x04ce, 0x0002, 0x0000, 0x026b, "ScanLogic", "SL11R-IDE",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, "ScanLogic", "SL11R-IDE",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* * Reported by Kriston Fincher <kriston@airmail.net> * Patch submitted by Sean Millichamp <sean@bruenor.org> * This is to support the Panasonic PalmCam PV-SD4090 * This entry is needed because the device reports Sub=ff
*/
UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, "Panasonic", "LS-120 Camera",
USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
/* * From Yukihiro Nakai, via zaitcev@yahoo.com. * This is needed for CB instead of CBI
*/
UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, "Sharp CE-CW05", "CD-R/RW Drive",
USB_SC_8070, USB_PR_CB, NULL, 0),
/* * Most of the following entries were developed with the help of * Shuttle/SCM directly.
*/
UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, "Matshita", "LS-120",
USB_SC_8020, USB_PR_CB, NULL, 0),
/* * Reported by Paul Ortyl <ortylp@3miasto.net> * Note that it's similar to the device above, only different prodID
*/
UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, "Tekom Technologies, Inc", "400_CAMERA",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * Submitted by Lars Jacob <jacob.lars@googlemail.com> * This entry is needed because the device reports Sub=ff
*/
UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, "Sony", "DSC-T1/T5/H5",
USB_SC_8070, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* We keep this entry to force the transport; firmware 3.00 and later is ok. */
UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, "Y-E Data", "Flashbuster-U",
USB_SC_DEVICE, USB_PR_CB, NULL,
US_FL_SINGLE_LUN),
/* * Reported by Johann Cardon <johann.cardon@free.fr> * This entry is needed only because the device reports * bInterfaceClass = 0xff (vendor-specific)
*/
UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Y-E Data", "Silicon Media R/W",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
/* * Reported by Andre Welter <a.r.welter@gmx.de> * This antique device predates the release of the Bulk-only Transport * spec, and if it gets a Get-Max-LUN then it requires the host to do a * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent * us from sending the request.
*/
UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, "Iomega", "ZIP 100",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Reported by Christian Schaller <cschalle@redhat.com> */
UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000, "LaCie", "External HDD",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
/* * Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't.
*/
UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, "In-System", "PyroGate External CD-ROM Enclosure (FCD-523)",
USB_SC_SCSI, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* * Submitted by Sven Anderson <sven-linux@anderson.de> * There are at least four ProductIDs used for iPods, so I added 0x1202 and * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears * to change with firmware updates, I changed the range to maximum for all * iPod entries.
*/
UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, "Apple", "iPod",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Avi Kivity <avi@argo.co.il> */
UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, "Apple", "iPod",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* * The following two entries are for a Genesys USB to IDE * converter chip, but it changes its ProductId depending * on whether or not a disk or an optical device is enclosed * They were originally reported by Alexander Oltu * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> * respectively. * * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz * <phil@ipom.com> as these flags were made and hard-coded * special-cases were pulled from scsiglue.c.
*/
UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, "Genesys Logic", "USB to SATA",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
/* * Reported by Jean-Baptiste Onofre <jb@nanthrax.net> * Support the following product : * "Dane-Elec MediaTouch"
*/
UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, "RockChip", "MTP",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
/* * Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present * at least in the following products: * "Magnex Digital Video Panel DVP 1800" * "MP4 AIGO 4GB SLOT SD" * "Teclast TL-C260 MP3" * "i.Meizu PMP MP3/MP4" * "Speed MV8 MP4 Audio Player"
*/
UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, "RockChip", "ROCK MP3",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
/* * Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>. * See also http://martin.wilck.bei.t-online.de/#kecf .
*/
UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", "KECF-USB",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
/* * Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: * - They tell us they are using transport protocol CBI. In reality they * are using transport protocol CB. * - They don't like the INQUIRY command. So we must handle this command * of the SCSI layer ourselves. * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have * bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB). * So don't remove the USB_PR_CB override! * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override.
*/
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, "Casio", "QV DigitalCamera",
USB_SC_8070, USB_PR_CB, NULL,
US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
/* Supplied with some Castlewood ORB removable drives */
UNUSUAL_DEV( 0x084b, 0xa001, 0x0000, 0x9999, "Castlewood Systems", "USB to SCSI cable",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
*/
/* * Entry needed for flags. Moreover, all devices with this ID use * bulk-only transport, but _some_ falsely report Control/Bulk instead. * One example is "Trumpion Digital Research MYMP3". * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
*/
UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, "Trumpion", "t33520 USB Flash Card Controller",
USB_SC_DEVICE, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* * Reported by Filippo Bardelli <filibard@libero.it> * The device reports a subclass of RBC, which is wrong.
*/
UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, "Trumpion Microelectronics, Inc.", "33520 USB Digital Voice Recorder",
USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
/* * Reported by Icenowy Zheng <icenowy@aosc.io> * The SMI SM3350 USB-UFS bridge controller will enter a wrong state * that do not process read/write command if a long sense is requested, * so force to use 18-byte sense.
*/
UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff, "SMI", "SM3350 UFS-to-USB-Mass-Storage bridge",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
/* * Reported by Paul Hartman <paul.hartman+linux@gmail.com> * This card reader returns "Illegal Request, Logical Block Address * Out of Range" for the first READ(10) after a new card is inserted.
*/
UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, "Feiya", "SD/SDHC Card Reader",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_INITIAL_READ10 ),
/* * Patch by Tasos Sahanidis <tasos@tasossah.com> * This flash drive always shows up with write protect enabled * during the first mode sense.
*/
UNUSUAL_DEV(0x0951, 0x1697, 0x0100, 0x0100, "Kingston", "DT Ultimate G3",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT),
/* * This Pentax still camera is not conformant * to the USB storage specification: - * - It does not like the INQUIRY command. So we must handle this command * of the SCSI layer ourselves. * Tested on Rev. 10.00 (0x1000) * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
*/
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, "Pentax", "Optio 2/3/400",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* * These are virtual windows driver CDs, which the zd1211rw driver * automatically converts into WLAN devices.
*/
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, "ZyXEL", "G-220F USB-WLAN Install",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
/* * Reported by F. Aben <f.aben@option.com> * This device (wrongly) has a vendor-specific device descriptor. * The entry is needed so usb-storage can bind to it's mass-storage * interface as an interface driver
*/
UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, "Option", "GI 0401 SD-Card",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ),
/* * Reported by Jan Dumon <j.dumon@option.com> * These devices (wrongly) have a vendor-specific device descriptor. * These entries are needed so usb-storage can bind to their mass-storage * interface as an interface driver
*/
UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, "Option", "GI 0431 SD-Card",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ),
/* * Reported by Lubomir Blaha <tritol@trilogic.cz> * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this * works for me. Can anybody correct these values? (I able to test corrected * version.)
*/
UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, "Netac", "USB-CF-Card",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* * Reported by Edward Chapman (taken from linux-usb mailing list) * Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive
*/
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999, "Netac", "USB Flash Disk",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * Patch by Stephan Walter <stephan.walter@epfl.ch> * I don't know why, but it works...
*/
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, "WINWARD", "Music Disk",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, "PNP_MP3", "PNP_MP3 PLAYER",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * Reported by Benjamin Schiller <sbenni@gmx.de> * It is also sold by Easylite as DJ 20
*/
UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, "Typhoon", "My DJ 1820",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
/* * Patch by Leonid Petrov mail at lpetrov.net * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org> * http://www.qbik.ch/usb/devices/showdev.php?id=1705 * Updated to 103 device by MJ Ray mjr at phonecoop.coop
*/
UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, "Oracom Co., Ltd", "ORC-200M",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * David Kuehling <dvdkhlng@gmx.de>: * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI * errors when trying to write.
*/
UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, "C-MEX", "A-VOX",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Submitted by Nick Holloway */
UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, "VTech", "Kidizoom",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */
UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201, "Research In Motion", "BlackBerry Bold 9000",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* * Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. * Devices with bcd > 110 seem to not need it while those * with bcd < 110 appear to need it.
*/
UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, "Desknote", "UCR-61S2B",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ),
/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */
UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999, "Western Digital", "My Passport HDD",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
/* * Reported by Fabio Venturi <f.venturi@tdnet.it> * The device reports a vendor-specific bDeviceClass.
*/
UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, "Actions Semiconductor", "Mtp device",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
/* * Reported by Pascal Terjan <pterjan@mandriva.com> * Ignore driver CD mode and force into modem mode by default.
*/
UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, "D-Link", "USB Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
/* * Reported by Kevin Lloyd <linux@sierrawireless.com> * Entry is needed for the initializer function override, * which instructs the device to load as a modem * device.
*/
UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, "Sierra Wireless", "USB MMC Storage",
USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init, 0),
/* * Reported by Jaco Kroon <jaco@kroon.co.za> * The usb-storage module found on the Digitech GNX4 (and supposedly other * devices) misbehaves and causes a bunch of invalid I/O errors.
*/
UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, "Digitech HMG", "DigiTech Mass Storage",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* * Reported by Tobias Jakobi <tjakobi@math.uni-bielefeld.de> * The INIC-3619 bridge is used in the StarTech SLSODDU33B * SATA-USB enclosure for slimline optical drives. * * The quirk enables MakeMKV to properly exchange keys with * an installed BD drive.
*/
UNUSUAL_DEV( 0x13fd, 0x3609, 0x0209, 0x0209, "Initio Corporation", "INIC-3619",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Francesco Foresti <frafore@tiscali.it> */
UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, "Super Top", "IDE DEVICE",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Michael Büsch <m@bues.ch> */
UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0117, "JMicron", "USB to ATA/ATAPI Bridge",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA ),
/* Reported by David Kozub <zub@linux.fjfi.cvut.cz> */
UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, "JMicron", "JMS567",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA),
/* * Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> * JMicron responds to USN and several other SCSI ioctls with a
* residue that causes subsequent I/O requests to fail. */
UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, "JMicron", "USB to ATA/ATAPI Bridge",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
/* * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
* and Mac USB Dock USB-SCSI */
UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133, "Entrega Technologies", "USB to SCSI Converter",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* * Reported by Robert Schedel <r.schedel@yahoo.de> * Note: this is a 'super top' device like the above 14cd/6600 device
*/
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, "Teac", "HD-35PUK-B",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Oliver Neukum <oneukum@suse.com> */
UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100, "ASMedia", "AS2105",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NEEDS_CAP16),
UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999, "Ariston Technologies", "iConnect USB to SCSI adapter",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* * Reported by Hans de Goede <hdegoede@redhat.com> * These Appotech controllers are found in Picture Frames, they provide a * (buggy) emulation of a cdrom drive which contains the windows software * Uploading of pictures happens over the corresponding /dev/sg device.
*/
UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000, "BUILDWIN", "Photo Frame",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000, "BUILDWIN", "Photo Frame",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, "BUILDWIN", "Photo Frame",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_READ_DISC_INFO ),
/* * Reported by Matthias Schwarzott <zzam@gentoo.org> * The Amazon Kindle treats SYNCHRONIZE CACHE as an indication that * the host may be finished with it, and automatically ejects its * emulated media unless it receives another command within one second.
*/
UNUSUAL_DEV( 0x1949, 0x0004, 0x0000, 0x9999, "Amazon", "Kindle",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SENSE_AFTER_SYNC ),
/* * Reported by Oliver Neukum <oneukum@suse.com> * This device morphes spontaneously into another device if the access * pattern of Windows isn't followed. Thus writable media would be dirty * if the initial instance is used. So the device is limited to its * virtual CD. * And yes, the concept that BCD goes up to 9 is not heeded
*/
UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff, "ZTE,Incorporated", "ZTE WCDMA Technologies MSM",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* * Reported by Sven Geggus <sven-usbst@geggus.net> * This encrypted pen drive returns bogus data for the initial READ(10).
*/
UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, "Corsair", "Padlock v2",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_INITIAL_READ10 ),
/* * Reported by Hans de Goede <hdegoede@redhat.com> * These are mini projectors using USB for both power and video data transport * The usb-storage interface is a virtual windows driver CD, which the gm12u320 * driver automatically converts into framebuffer & kms dri device nodes.
*/
UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff, "Grain-media Technology Corp.", "USB3.0 Device GM12U320",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
/* * Patch by Richard Schütz <r.schtz@t-online.de> * This external hard drive enclosure uses a JMicron chip which * needs the US_FL_IGNORE_RESIDUE flag to work properly.
*/
UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, "TrekStor GmbH & Co. KG", "DataStation maxi g.u",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
/* * Reported by Icenowy Zheng <uwu@icenowy.me> * This is an interface for vendor-specific cryptic commands instead * of real USB storage device.
*/
UNUSUAL_DEV( 0xe5b7, 0x0811, 0x0100, 0x0100, "ZhuHai JieLi Technology", "JieLi BR21",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE),
/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, "DataStor", "USB4500 FW1.04",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
