Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/clocksource/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  timer-orion.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Marvell Orion SoC timer handling.
 *
 * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 *
 * Timer 0 is used as free-running clocksource, while timer 1 is
 * used as clock_event_device.
 */


#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
#include <linux/sched_clock.h>

#define TIMER_CTRL  0x00
#define  TIMER0_EN  BIT(0)
#define  TIMER0_RELOAD_EN BIT(1)
#define  TIMER1_EN  BIT(2)
#define  TIMER1_RELOAD_EN BIT(3)
#define TIMER0_RELOAD  0x10
#define TIMER0_VAL  0x14
#define TIMER1_RELOAD  0x18
#define TIMER1_VAL  0x1c

#define ORION_ONESHOT_MIN 1
#define ORION_ONESHOT_MAX 0xfffffffe

static void __iomem *timer_base;

static unsigned long notrace orion_read_timer(void)
{
 return ~readl(timer_base + TIMER0_VAL);
}

static struct delay_timer orion_delay_timer = {
 .read_current_timer = orion_read_timer,
};

static void __init orion_delay_timer_init(unsigned long rate)
{
 orion_delay_timer.freq = rate;
 register_current_timer_delay(&orion_delay_timer);
}

/*
 * Free-running clocksource handling.
 */

static u64 notrace orion_read_sched_clock(void)
{
 return ~readl(timer_base + TIMER0_VAL);
}

/*
 * Clockevent handling.
 */

static u32 ticks_per_jiffy;

static int orion_clkevt_next_event(unsigned long delta,
       struct clock_event_device *dev)
{
 /* setup and enable one-shot timer */
 writel(delta, timer_base + TIMER1_VAL);
 atomic_io_modify(timer_base + TIMER_CTRL,
  TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);

 return 0;
}

static int orion_clkevt_shutdown(struct clock_event_device *dev)
{
 /* disable timer */
 atomic_io_modify(timer_base + TIMER_CTRL,
    TIMER1_RELOAD_EN | TIMER1_EN, 0);
 return 0;
}

static int orion_clkevt_set_periodic(struct clock_event_device *dev)
{
 /* setup and enable periodic timer at 1/HZ intervals */
 writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
 writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
 atomic_io_modify(timer_base + TIMER_CTRL,
    TIMER1_RELOAD_EN | TIMER1_EN,
    TIMER1_RELOAD_EN | TIMER1_EN);
 return 0;
}

static struct clock_event_device orion_clkevt = {
 .name   = "orion_event",
 .features  = CLOCK_EVT_FEAT_ONESHOT |
      CLOCK_EVT_FEAT_PERIODIC,
 .shift   = 32,
 .rating   = 300,
 .set_next_event  = orion_clkevt_next_event,
 .set_state_shutdown = orion_clkevt_shutdown,
 .set_state_periodic = orion_clkevt_set_periodic,
 .set_state_oneshot = orion_clkevt_shutdown,
 .tick_resume  = orion_clkevt_shutdown,
};

static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
{
 orion_clkevt.event_handler(&orion_clkevt);
 return IRQ_HANDLED;
}

static int __init orion_timer_init(struct device_node *np)
{
 unsigned long rate;
 struct clk *clk;
 int irq, ret;

 /* timer registers are shared with watchdog timer */
 timer_base = of_iomap(np, 0);
 if (!timer_base) {
  pr_err("%pOFn: unable to map resource\n", np);
  return -ENXIO;
 }

 clk = of_clk_get(np, 0);
 if (IS_ERR(clk)) {
  pr_err("%pOFn: unable to get clk\n", np);
  return PTR_ERR(clk);
 }

 ret = clk_prepare_enable(clk);
 if (ret) {
  pr_err("Failed to prepare clock\n");
  return ret;
 }

 /* we are only interested in timer1 irq */
 irq = irq_of_parse_and_map(np, 1);
 if (irq <= 0) {
  pr_err("%pOFn: unable to parse timer1 irq\n", np);
  ret = -EINVAL;
  goto out_unprep_clk;
 }

 rate = clk_get_rate(clk);

 /* setup timer0 as free-running clocksource */
 writel(~0, timer_base + TIMER0_VAL);
 writel(~0, timer_base + TIMER0_RELOAD);
 atomic_io_modify(timer_base + TIMER_CTRL,
  TIMER0_RELOAD_EN | TIMER0_EN,
  TIMER0_RELOAD_EN | TIMER0_EN);

 ret = clocksource_mmio_init(timer_base + TIMER0_VAL,
        "orion_clocksource", rate, 300, 32,
        clocksource_mmio_readl_down);
 if (ret) {
  pr_err("Failed to initialize mmio timer\n");
  goto out_unprep_clk;
 }

 sched_clock_register(orion_read_sched_clock, 32, rate);

 /* setup timer1 as clockevent timer */
 ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER,
     "orion_event", NULL);
 if (ret) {
  pr_err("%pOFn: unable to setup irq\n", np);
  goto out_unprep_clk;
 }

 ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
 orion_clkevt.cpumask = cpumask_of(0);
 orion_clkevt.irq = irq;
 clockevents_config_and_register(&orion_clkevt, rate,
     ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);


 orion_delay_timer_init(rate);

 return 0;

out_unprep_clk:
 clk_disable_unprepare(clk);
 return ret;
}
TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);

Messung V0.5
C=95 H=90 G=92

¤ Dauer der Verarbeitung: 0.3 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.