Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/clocksource/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 21 kB image not shown  

Quelle  Kconfig   Sprache: unbekannt

 
Spracherkennung für: vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

# SPDX-License-Identifier: GPL-2.0-only
menu "Clock Source drivers"
 depends on GENERIC_CLOCKEVENTS

config TIMER_OF
 bool
 select TIMER_PROBE

config TIMER_ACPI
 bool
 select TIMER_PROBE

config TIMER_PROBE
 bool

config CLKSRC_I8253
 bool

config CLKEVT_I8253
 bool

config I8253_LOCK
 bool

config OMAP_DM_SYSTIMER
 bool
 select TIMER_OF

config CLKBLD_I8253
 def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK

config CLKSRC_MMIO
 bool

config BCM2835_TIMER
 bool "BCM2835 timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables the support for the BCM2835 timer driver.

config BCM_KONA_TIMER
 bool "BCM mobile timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables the support for the BCM Kona mobile timer driver.

config DAVINCI_TIMER
 bool "Texas Instruments DaVinci timer driver" if COMPILE_TEST
 help
   Enables the support for the TI DaVinci timer driver.

config DIGICOLOR_TIMER
 bool "Digicolor timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 depends on HAS_IOMEM
 help
   Enables the support for the digicolor timer driver.

config OMAP_DM_TIMER
 bool "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
 default y if ARCH_K3
 select TIMER_OF
 help
   Enables the support for the TI dual-mode timer driver.

config DW_APB_TIMER
 bool "DW APB timer driver" if COMPILE_TEST
 help
   Enables the support for the dw_apb timer.

config DW_APB_TIMER_OF
 bool
 select DW_APB_TIMER
 select TIMER_OF

config ECONET_EN751221_TIMER
 bool "EcoNet EN751221 High Precision Timer" if COMPILE_TEST
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Support for CPU timer found on EcoNet MIPS based SoCs.

config FTTMR010_TIMER
 bool "Faraday Technology timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 select TIMER_OF
 select MFD_SYSCON
 help
   Enables support for the Faraday Technology timer block
   FTTMR010.

config IXP4XX_TIMER
 bool "Intel XScale IXP4xx timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables support for the Intel XScale IXP4xx SoC timer.

config ROCKCHIP_TIMER
 bool "Rockchip timer driver" if COMPILE_TEST
 depends on ARM || ARM64
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Enables the support for the Rockchip timer driver.

config ARMADA_370_XP_TIMER
 bool "Armada 370 and XP timer driver" if COMPILE_TEST
 depends on ARM
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Enables the support for the Armada 370 and XP timer driver.

config MESON6_TIMER
 bool "Meson6 timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables the support for the Meson6 timer driver.

config ORION_TIMER
 bool "Orion timer driver" if COMPILE_TEST
 depends on ARM
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Enables the support for the Orion timer driver

config OWL_TIMER
 bool "Owl timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables the support for the Actions Semi Owl timer driver.

config RDA_TIMER
 bool "RDA timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables the support for the RDA Micro timer driver.

config REALTEK_OTTO_TIMER
 bool "Clocksource/timer for the Realtek Otto platform" if COMPILE_TEST
 select TIMER_OF
 help
   This driver adds support for the timers found in the Realtek RTL83xx
   and RTL93xx SoCs series. This includes chips such as RTL8380, RTL8381
   and RTL832, as well as chips from the RTL839x series, such as RTL8390
   RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series
   such as RTL9301, RTL9302 or RTL9303.

config SUN4I_TIMER
 bool "Sun4i timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables support for the Sun4i timer.

config SUN5I_HSTIMER
 bool "Sun5i timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 depends on COMMON_CLK
 help
   Enables support the Sun5i timer.

config TEGRA_TIMER
 bool "Tegra timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 select TIMER_OF
 depends on ARCH_TEGRA || COMPILE_TEST
 help
   Enables support for the Tegra driver.

config TEGRA186_TIMER
 bool "NVIDIA Tegra186 timer driver"
 depends on ARCH_TEGRA || COMPILE_TEST
 depends on WATCHDOG && WATCHDOG_CORE
 help
   Enables support for the timers and watchdogs found on NVIDIA
   Tegra186 and later SoCs.

config VT8500_TIMER
 bool "VT8500 timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 help
   Enables support for the VT8500 driver.

config NPCM7XX_TIMER
 bool "NPCM7xx timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
   where TIMER0 serves as clockevent and TIMER1 serves as clocksource.

config CADENCE_TTC_TIMER
 bool "Cadence TTC timer driver" if COMPILE_TEST
 depends on COMMON_CLK
 help
   Enables support for the Cadence TTC driver.

config ASM9260_TIMER
 bool "ASM9260 timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables support for the ASM9260 timer.

config CLKSRC_NOMADIK_MTU
 bool "Nomakdik clocksource driver" if COMPILE_TEST
 depends on ARM
 select CLKSRC_MMIO
 help
   Support for Multi Timer Unit. MTU provides access
   to multiple interrupt generating programmable
   32-bit free running decrementing counters.

config CLKSRC_DBX500_PRCMU
 bool "Clocksource PRCMU Timer" if COMPILE_TEST
 depends on HAS_IOMEM
 help
   Use the always on PRCMU Timer as clocksource.

config CLPS711X_TIMER
 bool "Cirrus Logic timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables support for the Cirrus Logic PS711 timer.

config MXS_TIMER
 bool "MXS timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 select STMP_DEVICE
 help
   Enables support for the MXS timer.

config NSPIRE_TIMER
 bool "NSpire timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables support for the Nspire timer.

config KEYSTONE_TIMER
 bool "Keystone timer driver" if COMPILE_TEST
 depends on ARM || ARM64
 select CLKSRC_MMIO
 help
   Enables support for the Keystone timer.

config INTEGRATOR_AP_TIMER
 bool "Integrator-AP timer driver" if COMPILE_TEST
 select CLKSRC_MMIO
 help
   Enables support for the Integrator-AP timer.

config CLKSRC_LPC32XX
 bool "Clocksource for LPC32XX" if COMPILE_TEST
 depends on HAS_IOMEM
 depends on ARM
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Support for the LPC32XX clocksource.

config CLKSRC_PISTACHIO
 bool "Clocksource for Pistachio SoC"
 depends on HAS_IOMEM
 depends on MIPS || COMPILE_TEST
 select TIMER_OF
 help
   Enables the clocksource for the Pistachio SoC.

config CLKSRC_TI_32K
 bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK
 select TIMER_OF if OF
 help
   This option enables support for Texas Instruments 32.768 Hz clocksource
   available on many OMAP-like platforms.

config CLKSRC_STM32
 bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
 select CLKSRC_MMIO
 select TIMER_OF

config CLKSRC_STM32_LP
 bool "Low power clocksource for STM32 SoCs"
 depends on MFD_STM32_LPTIMER || COMPILE_TEST

config CLKSRC_MPS2
 bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK
 select CLKSRC_MMIO
 select TIMER_OF

config ARC_TIMERS
 bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK
 select TIMER_OF
 help
   These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
   (ARC700 as well as ARC HS38).
   TIMER0 serves as clockevent while TIMER1 provides clocksource.

config ARC_TIMERS_64BIT
 bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
 depends on ARC_TIMERS
 select TIMER_OF
 help
   This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP).
   RTC is implemented inside the core, while GFRC sits outside the core in
   ARConnect IP block. Driver automatically picks one of them for clocksource
   as appropriate.

config ARM_ARCH_TIMER
 bool
 select TIMER_OF if OF
 select TIMER_ACPI if ACPI

config ARM_ARCH_TIMER_EVTSTREAM
 bool "Enable ARM architected timer event stream generation by default"
 default y if ARM_ARCH_TIMER
 depends on ARM_ARCH_TIMER
 help
   This option enables support by default for event stream generation
   based on the ARM architected timer. It is used for waking up CPUs
   executing the wfe instruction at a frequency represented as a
   power-of-2 divisor of the clock rate. The behaviour can also be
   overridden on the command line using the
   clocksource.arm_arch_timer.evtstream parameter.
   The main use of the event stream is wfe-based timeouts of userspace
   locking implementations. It might also be useful for imposing timeout
   on wfe to safeguard against any programming errors in case an expected
   event is not generated.
   This must be disabled for hardware validation purposes to detect any
   hardware anomalies of missing events.

config ARM_ARCH_TIMER_OOL_WORKAROUND
 bool

config FSL_ERRATUM_A008585
 bool "Workaround for Freescale/NXP Erratum A-008585"
 default y
 depends on ARM_ARCH_TIMER && ARM64
 select ARM_ARCH_TIMER_OOL_WORKAROUND
 help
   This option enables a workaround for Freescale/NXP Erratum
   A-008585 ("ARM generic timer may contain an erroneous
   value").  The workaround will only be active if the
   fsl,erratum-a008585 property is found in the timer node.

config HISILICON_ERRATUM_161010101
 bool "Workaround for Hisilicon Erratum 161010101"
 default y
 select ARM_ARCH_TIMER_OOL_WORKAROUND
 depends on ARM_ARCH_TIMER && ARM64
 help
   This option enables a workaround for Hisilicon Erratum
   161010101. The workaround will be active if the hisilicon,erratum-161010101
   property is found in the timer node.

config ARM64_ERRATUM_858921
 bool "Workaround for Cortex-A73 erratum 858921"
 default y
 select ARM_ARCH_TIMER_OOL_WORKAROUND
 depends on ARM_ARCH_TIMER && ARM64
 help
   This option enables a workaround applicable to Cortex-A73
   (all versions), whose counter may return incorrect values.
   The workaround will be dynamically enabled when an affected
   core is detected.

config SUN50I_ERRATUM_UNKNOWN1
 bool "Workaround for Allwinner A64 erratum UNKNOWN1"
 default y
 depends on ARM_ARCH_TIMER && ARM64 && ARCH_SUNXI
 select ARM_ARCH_TIMER_OOL_WORKAROUND
 help
   This option enables a workaround for instability in the timer on
   the Allwinner A64 SoC. The workaround will only be active if the
   allwinner,erratum-unknown1 property is found in the timer node.

config ARM_GLOBAL_TIMER
 bool "Support for the ARM global timer" if COMPILE_TEST
 select TIMER_OF if OF
 depends on ARM
 help
   This option enables support for the ARM global timer unit.

config ARM_GT_INITIAL_PRESCALER_VAL
 int "ARM global timer initial prescaler value"
 default 2 if ARCH_ZYNQ
 default 1
 depends on ARM_GLOBAL_TIMER
 help
   When the ARM global timer initializes, its current rate is declared
   to the kernel and maintained forever. Should its parent clock
   change, the driver tries to fix the timer's internal prescaler.
   On some machs (i.e. Zynq) the initial prescaler value thus poses
   bounds about how much the parent clock is allowed to decrease or
   increase wrt the initial clock value.
   This affects CPU_FREQ max delta from the initial frequency.

config ARM_TIMER_SP804
 bool "Support for Dual Timer SP804 module"
 depends on ARM || ARM64 || COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK && HAVE_CLK
 select CLKSRC_MMIO
 select TIMER_OF if OF

config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 bool
 depends on ARM_GLOBAL_TIMER
 default y
 help
   Use ARM global timer clock source as sched_clock.

config ARMV7M_SYSTICK
 bool "Support for the ARMv7M system time" if COMPILE_TEST
 select TIMER_OF if OF
 select CLKSRC_MMIO
 help
   This option enables support for the ARMv7M system timer unit.

config ATMEL_PIT
 bool "Atmel PIT support" if COMPILE_TEST
 depends on HAS_IOMEM
 select TIMER_OF if OF
 help
   Support for the Periodic Interval Timer found on Atmel SoCs.

config ATMEL_ST
 bool "Atmel ST timer support" if COMPILE_TEST
 depends on HAS_IOMEM
 select TIMER_OF
 select MFD_SYSCON
 help
   Support for the Atmel ST timer.

config ATMEL_TCB_CLKSRC
 bool "Atmel TC Block timer driver" if COMPILE_TEST
 depends on ARM && OF && HAS_IOMEM
 select TIMER_OF
 help
   Support for Timer Counter Blocks on Atmel SoCs.

config CLKSRC_EXYNOS_MCT
 bool "Exynos multi core timer driver" if COMPILE_TEST
 depends on ARM || ARM64
 depends on ARCH_ARTPEC || ARCH_EXYNOS || COMPILE_TEST
 help
   Support for Multi Core Timer controller on Exynos SoCs.

config CLKSRC_SAMSUNG_PWM
 bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
 depends on HAS_IOMEM
 depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
 help
   This is a new clocksource driver for the PWM timer found in
   Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
   for all devicetree enabled platforms. This driver will be
   needed only on systems that do not have the Exynos MCT available.

config FSL_FTM_TIMER
 bool "Freescale FlexTimer Module driver" if COMPILE_TEST
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 help
   Support for Freescale FlexTimer Module (FTM) timer.

config VF_PIT_TIMER
 bool
 select CLKSRC_MMIO
 help
   Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs.

config SYS_SUPPORTS_SH_CMT
 bool

config MTK_TIMER
 bool "Mediatek timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Support for Mediatek timer driver.

config MTK_CPUX_TIMER
 bool "MediaTek CPUX timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 default ARCH_MEDIATEK
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Support for MediaTek CPUXGPT timer driver.

config SPRD_TIMER
 bool "Spreadtrum timer driver" if EXPERT
 depends on HAS_IOMEM
 depends on (ARCH_SPRD || COMPILE_TEST)
 default ARCH_SPRD
 select TIMER_OF
 help
   Enables support for the Spreadtrum timer driver.

config SYS_SUPPORTS_SH_MTU2
 bool

config SYS_SUPPORTS_SH_TMU
 bool

config SYS_SUPPORTS_EM_STI
 bool

config CLKSRC_JCORE_PIT
 bool "J-Core PIT timer driver" if COMPILE_TEST
 depends on OF
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 help
   This enables build of clocksource and clockevent driver for
   the integrated PIT in the J-Core synthesizable, open source SoC.

config SH_TIMER_CMT
 bool "Renesas CMT timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 default SYS_SUPPORTS_SH_CMT
 help
   This enables build of a clocksource and clockevent driver for
   the Compare Match Timer (CMT) hardware available in 16/32/48-bit
   variants on a wide range of Mobile and Automotive SoCs from Renesas.

config SH_TIMER_MTU2
 bool "Renesas MTU2 timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 default SYS_SUPPORTS_SH_MTU2
 help
   This enables build of a clockevent driver for the Multi-Function
   Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
   This hardware comes with 16-bit timer registers.

config RENESAS_OSTM
 bool "Renesas OSTM timer driver"
 depends on ARCH_RENESAS || COMPILE_TEST
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables the support for the Renesas OSTM.

config SH_TIMER_TMU
 bool "Renesas TMU timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 default SYS_SUPPORTS_SH_TMU
 help
   This enables build of a clocksource and clockevent driver for
   the 32-bit Timer Unit (TMU) hardware available on a wide range
   SoCs from Renesas.

config EM_TIMER_STI
 bool "Renesas STI timer driver" if COMPILE_TEST
 depends on HAS_IOMEM
 default SYS_SUPPORTS_EM_STI
 help
   This enables build of a clocksource and clockevent driver for
   the 48-bit System Timer (STI) hardware available on a SoCs
   such as EMEV2 from former NEC Electronics.

config CLKSRC_QCOM
 bool "Qualcomm MSM timer" if COMPILE_TEST
 depends on ARM
 select TIMER_OF
 help
   This enables the clocksource and the per CPU clockevent driver for the
   Qualcomm SoCs.

config CLKSRC_VERSATILE
 bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK
 select TIMER_OF
 default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
 help
   This option enables clock source based on free running
   counter available in the "System Registers" block of
   ARM Versatile and Versatile Express reference platforms.

config CLKSRC_MIPS_GIC
 bool
 depends on MIPS_GIC
 select CLOCKSOURCE_WATCHDOG
 select TIMER_OF

config CLKSRC_PXA
 bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 help
   This enables OST0 support available on PXA and SA-11x0
   platforms.

config CLKSRC_IMX_GPT
 bool "Clocksource using i.MX GPT" if COMPILE_TEST
 depends on (ARM || ARM64) && HAVE_CLK
 select CLKSRC_MMIO

config CLKSRC_IMX_TPM
 bool "Clocksource using i.MX TPM" if COMPILE_TEST
 depends on (ARM || ARM64) && HAVE_CLK
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enable this option to use IMX Timer/PWM Module (TPM) timer as
   clocksource.

config TIMER_IMX_SYS_CTR
 bool "i.MX system counter timer" if COMPILE_TEST
 select TIMER_OF
 help
   Enable this option to use i.MX system counter timer as a
   clockevent.

config CLKSRC_LOONGSON1_PWM
 bool "Clocksource using Loongson1 PWM"
 depends on MACH_LOONGSON32 || COMPILE_TEST
 select MIPS_EXTERNAL_TIMER
 select TIMER_OF
 help
   Enable this option to use Loongson1 PWM timer as clocksource
   instead of the performance counter.

config CLKSRC_ST_LPC
 bool "Low power clocksource found in the LPC" if COMPILE_TEST
 select TIMER_OF if OF
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 help
   Enable this option to use the Low Power controller timer
   as clocksource.

config GXP_TIMER
 bool "GXP timer driver" if COMPILE_TEST && !ARCH_HPE
 default ARCH_HPE
 select TIMER_OF if OF
 help
   Provides a driver for the timer control found on HPE
   GXP SOCs. This is required for all GXP SOCs.

config RISCV_TIMER
 bool "Timer for the RISC-V platform" if COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI
 select TIMER_PROBE
 select TIMER_OF
 help
   This enables the per-hart timer built into all RISC-V systems, which
   is accessed via both the SBI and the rdcycle instruction.  This is
   required for all RISC-V systems.

config CLINT_TIMER
 bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
 depends on GENERIC_SCHED_CLOCK && RISCV
 select TIMER_PROBE
 select TIMER_OF
 help
   This option enables the CLINT timer for RISC-V systems.  The CLINT
   driver is usually used for NoMMU RISC-V systems.

config CSKY_MP_TIMER
 bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
 depends on CSKY
 select TIMER_OF
 help
   Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
   system.
   csky,mptimer is not only used in SMP system, it also could be used in
   single core system. It's not a mmio reg and it uses mtcr/mfcr instruction.

config GX6605S_TIMER
 bool "Gx6605s SOC system timer driver" if COMPILE_TEST
 depends on CSKY
 select CLKSRC_MMIO
 select TIMER_OF
 help
   This option enables support for gx6605s SOC's timer.

config MILBEAUT_TIMER
 bool "Milbeaut timer driver" if COMPILE_TEST
 depends on OF
 depends on ARM
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Enables the support for Milbeaut timer driver.

config MSC313E_TIMER
 bool "MSC313E timer driver" if COMPILE_TEST
 select TIMER_OF
 select CLKSRC_MMIO
 help
   Enables support for the MStar MSC313E timer driver.
   This provides access to multiple interrupt generating
   programmable 32-bit free running incrementing counters.

config INGENIC_TIMER
 bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
 default MACH_INGENIC
 depends on MIPS || COMPILE_TEST
 depends on COMMON_CLK
 select MFD_SYSCON
 select TIMER_OF
 select IRQ_DOMAIN
 help
   Support for the timer/counter unit of the Ingenic JZ SoCs.

config INGENIC_SYSOST
 bool "Clocksource/timer using the SYSOST in Ingenic X SoCs"
 depends on MIPS || COMPILE_TEST
 depends on COMMON_CLK
 select MFD_SYSCON
 select TIMER_OF
 select IRQ_DOMAIN
 help
   Support for the SYSOST of the Ingenic X Series SoCs.

config INGENIC_OST
 bool "Clocksource using the OST in Ingenic JZ SoCs"
 depends on MIPS || COMPILE_TEST
 depends on COMMON_CLK
 select MFD_SYSCON
 help
   Support for the Operating System Timer of the Ingenic JZ SoCs.

config MICROCHIP_PIT64B
 bool "Microchip PIT64B support"
 depends on OF && ARM
 select TIMER_OF
 help
   This option enables Microchip PIT64B timer for Atmel
   based system. It supports the oneshot, the periodic
   modes and high resolution. It is used as a clocksource
   and a clockevent.

config GOLDFISH_TIMER
 bool "Clocksource using goldfish-rtc"
 depends on M68K || COMPILE_TEST
 depends on RTC_DRV_GOLDFISH
 help
   Support for the timer/counter of goldfish-rtc

config EP93XX_TIMER
 bool "Cirrus Logic ep93xx timer driver" if COMPILE_TEST
 depends on ARCH_EP93XX
 depends on GENERIC_CLOCKEVENTS
 depends on HAS_IOMEM
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables support for the Cirrus Logic timer block
   EP93XX.

config RALINK_TIMER
 bool "Ralink System Tick Counter"
 depends on SOC_RT305X || SOC_MT7620 || COMPILE_TEST
 select CLKSRC_MMIO
 select TIMER_OF
 help
   Enables support for system tick counter present on
   Ralink SoCs RT3352 and MT7620.

config NXP_STM_TIMER
 bool "NXP System Timer Module driver"
 depends on ARCH_S32 || COMPILE_TEST
 select CLKSRC_MMIO
 help
          Enables the support for NXP System Timer Module found in the
          s32g NXP platform series.

endmenu

[ Dauer der Verarbeitung: 0.30 Sekunden  ]