// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk8xx.h"
#include "rk3588.dtsi"
/ {
model = "Theobroma Systems RK3588-SBC Jaguar";
compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
/* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
button-bios-disable {
label = "BIOS_DISABLE";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <0>;
};
};
aliases {
ethernet0 = &gmac0;
i2c10 = &i2c10;
mmc0 = &sdhci;
mmc1 = &sdmmc;
rtc0 = &rtc_twi;
};
chosen {
stdout-path = "serial2:115200n8";
};
/* DCIN is 12-24V but standard is 12V */
dc_12v: regulator-dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi0_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led1_pin>;
/* LED1 on PCB */
led-1 {
gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_HEARTBEAT;
linux,default-trigger = "heartbeat";
color = <LED_COLOR_ID_AMBER>;
};
};
/*
* 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
* clock generator.
* The clock output is gated via the OE pin on the clock generator.
* This is modeled as a fixed-clock plus a gpio-gate-clock.
*/
pcie_refclk_gen: pcie-refclk-gen-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pcie_refclk: pcie-refclk-clock {
compatible = "gpio-gate-clock";
clocks = <&pcie_refclk_gen>;
#clock-cells = <0>;
enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */
pinctrl-names = "default";
pinctrl-0 = <&pcie30x4_clkreqn_m0>;
};
pps {
compatible = "pps-gpio";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
};
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc5v0_sys>;
};
vcc_1v2_s3: regulator-vcc-1v2-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v2_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&vcc5v0_sys>;
};
/* Exposed on P14 and P15 */
vcc_2v8_s3: regulator-vcc-2v8-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc_2v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
vin-supply = <&vcc_3v3_s3>;
};
vcc_5v0_usb_a: regulator-vcc-5v0-usb-a {
compatible = "regulator-fixed";
regulator-name = "usb_a_vcc";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_5v0_usb_c1: regulator-vcc-5v0-usb-c1 {
compatible = "regulator-fixed";
regulator-name = "5v_usbc1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_5v0_usb_c2: regulator-vcc-5v0-usb-c2 {
compatible = "regulator-fixed";
regulator-name = "5v_usbc2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc3v3_mdot2: regulator-vcc3v3-mdot2 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_mdot2";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy1_ps {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&gmac0 {
clock_in_out = "output";
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii";
phy-supply = <&vcc_1v2_s3>;
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_rx_bus2
&gmac0_tx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus
ð0_pins
ð_reset>;
tx_delay = <0x10>;
rx_delay = <0x10>;
snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 100000>;
status = "okay";
};
&gpio1 {
mdot2e-w-disable1-n-hog {
gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "m.2 E-key W_DISABLE1#";
gpio-hog;
};
};
&gpio4 {
mdot2e-w-disable2-n-hog {
gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "m.2 E-key W_DISABLE2#";
gpio-hog;
};
};
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
};
&hdmi0 {
/* No CEC on Jaguar */
pinctrl-names = "default";
pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
status = "okay";
};
&hdmi0_in {
hdmi0_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi0>;
};
};
&hdmi0_out {
hdmi0_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi0_sound {
status = "okay";
};
&hdptxphy0 {
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
fan@18 {
compatible = "tsd,mule", "ti,amc6821";
reg = <0x18>;
i2c-mux {
compatible = "tsd,mule-i2c-mux";
#address-cells = <1>;
#size-cells = <0>;
i2c10: i2c@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
rtc_twi: rtc@6f {
compatible = "isil,isl1208";
reg = <0x6f>;
};
};
};
};
typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cc_int1>;
vbus-supply = <&vcc_5v0_usb_c1>;
connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USBC-1 P11";
power-role = "source";
self-powered;
source-pdos =
<PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>;
vbus-supply = <&vcc_5v0_usb_c1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usbc0_hs: endpoint {
remote-endpoint = <&usb_host0_xhci_drd_sw>;
};
};
port@1 {
reg = <1>;
usbc0_ss: endpoint {
remote-endpoint = <&usbdp_phy0_typec_ss>;
};
};
port@2 {
reg = <2>;
usbc0_sbu: endpoint {
remote-endpoint = <&usbdp_phy0_typec_sbu>;
};
};
};
};
};
vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_npu_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c1 {
pinctrl-0 = <&i2c1m4_xfer>;
};
&i2c6 {
pinctrl-0 = <&i2c6m4_xfer>;
};
&i2c7 {
status = "okay";
/* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
/* Also on 0x55 */
eeprom@54 {
compatible = "st,24c04", "atmel,24c04";
reg = <0x54>;
pagesize = <16>;
vcc-supply = <&vcc_3v3_s3>;
};
};
&i2c8 {
pinctrl-0 = <&i2c8m2_xfer>;
status = "okay";
typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cc_int2>;
vbus-supply = <&vcc_5v0_usb_c2>;
connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USBC-2 P12";
power-role = "source";
self-powered;
source-pdos =
<PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>;
vbus-supply = <&vcc_5v0_usb_c2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usbc1_hs: endpoint {
remote-endpoint = <&usb_host1_xhci_drd_sw>;
};
};
port@1 {
reg = <1>;
usbc1_ss: endpoint {
remote-endpoint = <&usbdp_phy1_typec_ss>;
};
};
port@2 {
reg = <2>;
usbc1_sbu: endpoint {
remote-endpoint = <&usbdp_phy1_typec_sbu>;
};
};
};
};
};
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2s5_8ch {
status = "okay";
};
&mdio0 {
rgmii_phy: ethernet-phy@6 {
/* KSZ9031 or KSZ9131 */
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x6>;
clocks = <&cru REFCLKO25M_ETH0_OUT>;
};
};
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
vpcie3v3-supply = <&vcc3v3_mdot2>;
status = "okay";
};
&pcie30phy {
status = "okay";
};
&pcie3x4 {
/*
* The board has a gpio-controlled "pcie_refclk" generator,
* so add it to the list of clocks.
*/
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
<&pcie_refclk>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe",
"ref";
pinctrl-names = "default";
pinctrl-0 = <&pcie30x4_waken_m0 &pcie30x4_perstn_m0>;
reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */
vpcie3v3-supply = <&vcc3v3_mdot2>;
status = "okay";
};
&pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
&pinctrl {
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ethernet {
eth_reset: eth-reset {
rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
led1_pin: led1-pin {
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie30x4 {
pcie30x4_clkreqn_m0: pcie30x4-clkreqn-m0 {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie30x4_perstn_m0: pcie30x4-perstn-m0 {
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie30x4_waken_m0: pcie30x4-waken-m0 {
rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
};
};
usb3 {
cc_int1: cc-int1 {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
cc_int2: cc-int2 {
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
typec0_sbu_dc_pins: typec0-sbu-dc-pins {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>,
<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_down>;
};
typec1_sbu_dc_pins: typec1-sbu-dc-pins {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>,
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
};
&sdhci {
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
mmc-pwrseq = <&emmc_pwrseq>;
no-sdio;
no-sd;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
};
&sdmmc {
broken-cd;
bus-width = <4>;
cap-sd-highspeed;
disable-wp;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-ddr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
status = "okay";
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
gpio-controller;
#gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
rockchip,reset-mode = <RK806_RESTART>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_gpu_s0";
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca_1v8_s0: pldo-reg1 {
regulator-name = "vcca_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: pldo-reg2 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_1v2_s0: pldo-reg3 {
regulator-name = "vdda_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca_3v3_s0: pldo-reg4 {
regulator-name = "vcca_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdda_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdda_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdda_0v75_s0: nldo-reg3 {
regulator-name = "vdda_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v85_s0: nldo-reg4 {
regulator-name = "vdda_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&tsadc {
status = "okay";
};
/* USB-C P11 connector */
&u2phy0 {
status = "okay";
};
&u2phy0_otg {
status = "okay";
};
/* USB-C P12 connector */
&u2phy1 {
status = "okay";
};
&u2phy1_otg {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc_5v0_usb_a>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
status = "okay";
};
/* Mule-ATtiny debug UART; typically baudrate 9600 */
&uart0 {
pinctrl-0 = <&uart0m0_xfer>;
status = "okay";
};
/* Main debug interface on P20 micro-USB B port and P21 header */
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
/* RS485 on P19 */
&uart3 {
pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
/* Mule-ATtiny UPDI flashing UART */
&uart7 {
pinctrl-0 = <&uart7m0_xfer>;
status = "okay";
};
/* Type-C on P11 */
&usbdp_phy0 {
orientation-switch;
pinctrl-names = "default";
pinctrl-0 = <&typec0_sbu_dc_pins>;
sbu1-dc-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU1_DC */
sbu2-dc-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU2_DC */
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
usbdp_phy0_typec_ss: endpoint@0 {
reg = <0>;
remote-endpoint = <&usbc0_ss>;
};
usbdp_phy0_typec_sbu: endpoint@1 {
reg = <1>;
remote-endpoint = <&usbc0_sbu>;
};
};
};
/* Type-C on P12 */
&usbdp_phy1 {
orientation-switch;
pinctrl-names = "default";
pinctrl-0 = <&typec1_sbu_dc_pins>;
sbu1-dc-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU1_DC */
sbu2-dc-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU2_DC */
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
usbdp_phy1_typec_ss: endpoint@0 {
reg = <0>;
remote-endpoint = <&usbc1_ss>;
};
usbdp_phy1_typec_sbu: endpoint@1 {
reg = <1>;
remote-endpoint = <&usbc1_sbu>;
};
};
};
/* host0 on P10 USB-A */
&usb_host0_ehci {
status = "okay";
};
/* host0 on P10 USB-A */
&usb_host0_ohci {
status = "okay";
};
/* host0 on P11 USB-C */
&usb_host0_xhci {
usb-role-switch;
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
usb_host0_xhci_drd_sw: endpoint {
remote-endpoint = <&usbc0_hs>;
};
};
};
/* host1 on P12 USB-C */
&usb_host1_xhci {
usb-role-switch;
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
usb_host1_xhci_drd_sw: endpoint {
remote-endpoint = <&usbc1_hs>;
};
};
};
/* host1 on M.2 E-key */
&usb_host1_ehci {
status = "okay";
};
/* host1 on M.2 E-key */
&usb_host1_ohci {
status = "okay";
};
&vop {
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi0_in_vp0>;
};
};
