Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/rockchip/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 14 kB image not shown  

Quelle  rk3568-lubancat-2.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/*
 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
 * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com>
 */

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"

/ {
 model = "EmbedFire LubanCat 2";
 compatible = "embedfire,lubancat-2", "rockchip,rk3568";

 aliases {
  ethernet0 = &gmac0;
  ethernet1 = &gmac1;
  mmc0 = &sdmmc0;
  mmc1 = &sdhci;
 };

 chosen: chosen {
  stdout-path = "serial2:1500000n8";
 };

 leds {
  compatible = "gpio-leds";

  user_led: user-led {
   label = "user_led";
   linux,default-trigger = "heartbeat";
   default-state = "on";
   gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
   pinctrl-names = "default";
   pinctrl-0 = <&user_led_pin>;
  };
 };

 hdmi-con {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi_con_in: endpoint {
    remote-endpoint = <&hdmi_out_con>;
   };
  };
 };

 dc_5v: regulator-dc-5v {
  compatible = "regulator-fixed";
  regulator-name = "dc_5v";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 vcc3v3_sys: regulator-vcc3v3-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_sys: regulator-vcc5v0-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&dc_5v>;
 };

 vcc3v3_m2_pcie: regulator-vcc3v3-m2-pcie {
  compatible = "regulator-fixed";
  regulator-name = "m2_pcie_3v3";
  enable-active-high;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc3v3_m2_pcie_en>;
  pinctrl-names = "default";
  startup-delay-us = <200000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc3v3_mini_pcie: regulator-vcc3v3-mini-pcie {
  compatible = "regulator-fixed";
  regulator-name = "minipcie_3v3";
  enable-active-high;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc3v3_mini_pcie_en>;
  pinctrl-names = "default";
  startup-delay-us = <5000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_usb20_host: regulator-vcc5v0-usb20-host {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_usb20_host";
  enable-active-high;
  gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc5v0_usb20_host_en>;
  pinctrl-names = "default";
 };

 vcc5v0_usb30_host: regulator-vcc5v0-usb30-host {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_usb30_host";
  enable-active-high;
  gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc5v0_usb30_host_en>;
  pinctrl-names = "default";
 };

 vcc5v0_otg_vbus: regulator-vcc5v0-otg-vbus {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_otg_vbus";
  enable-active-high;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc5v0_otg_vbus_en>;
  pinctrl-names = "default";
 };
};

&combphy0 {
 status = "okay";
};

&combphy1 {
 status = "okay";
};

&combphy2 {
 status = "okay";
};

&cpu0 {
 cpu-supply = <&vdd_cpu>;
};

&cpu1 {
 cpu-supply = <&vdd_cpu>;
};

&cpu2 {
 cpu-supply = <&vdd_cpu>;
};

&cpu3 {
 cpu-supply = <&vdd_cpu>;
};

&gpu {
 mali-supply = <&vdd_gpu>;
 status = "okay";
};

&hdmi {
 avdd-0v9-supply = <&vdda0v9_image>;
 avdd-1v8-supply = <&vcca1v8_image>;
 status = "okay";
};

&hdmi_in {
 hdmi_in_vp0: endpoint {
  remote-endpoint = <&vp0_out_hdmi>;
 };
};

&hdmi_out {
 hdmi_out_con: endpoint {
  remote-endpoint = <&hdmi_con_in>;
 };
};

&hdmi_sound {
 status = "okay";
};

&i2c0 {
 status = "okay";

 vdd_cpu: regulator@1c {
  compatible = "tcs,tcs4525";
  reg = <0x1c>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <800000>;
  regulator-max-microvolt = <1150000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc5v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };

 rk809: pmic@20 {
  compatible = "rockchip,rk809";
  reg = <0x20>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
  assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
  assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
  #clock-cells = <1>;
  clock-names = "mclk";
  clocks = <&cru I2S1_MCLKOUT_TX>;
  pinctrl-names = "default";
  pinctrl-0 = <&pmic_int>;
  system-power-controller;
  #sound-dai-cells = <0>;
  vcc1-supply = <&vcc3v3_sys>;
  vcc2-supply = <&vcc3v3_sys>;
  vcc3-supply = <&vcc3v3_sys>;
  vcc4-supply = <&vcc3v3_sys>;
  vcc5-supply = <&vcc3v3_sys>;
  vcc6-supply = <&vcc3v3_sys>;
  vcc7-supply = <&vcc3v3_sys>;
  vcc8-supply = <&vcc3v3_sys>;
  vcc9-supply = <&vcc3v3_sys>;
  wakeup-source;

  regulators {
   vdd_logic: DCDC_REG1 {
    regulator-name = "vdd_logic";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_gpu: DCDC_REG2 {
    regulator-name = "vdd_gpu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_ddr: DCDC_REG3 {
    regulator-name = "vcc_ddr";
    regulator-always-on;
    regulator-boot-on;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vdd_npu: DCDC_REG4 {
    regulator-name = "vdd_npu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8: DCDC_REG5 {
    regulator-name = "vcc_1v8";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda0v9_image: LDO_REG1 {
    regulator-name = "vdda0v9_image";
    regulator-boot-on;
    regulator-always-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda_0v9: LDO_REG2 {
    regulator-name = "vdda_0v9";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda0v9_pmu: LDO_REG3 {
    regulator-name = "vdda0v9_pmu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <900000>;
    };
   };

   vccio_acodec: LDO_REG4 {
    regulator-name = "vccio_acodec";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vccio_sd: LDO_REG5 {
    regulator-name = "vccio_sd";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc3v3_pmu: LDO_REG6 {
    regulator-name = "vcc3v3_pmu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vcca_1v8: LDO_REG7 {
    regulator-name = "vcca_1v8";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcca1v8_pmu: LDO_REG8 {
    regulator-name = "vcca1v8_pmu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vcca1v8_image: LDO_REG9 {
    regulator-name = "vcca1v8_image";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_3v3: SWITCH_REG1 {
    regulator-name = "vcc_3v3";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc3v3_sd: SWITCH_REG2 {
    regulator-name = "vcc3v3_sd";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };
  };
 };
};

&i2s1_8ch {
 rockchip,trcm-sync-tx-only;
 status = "okay";
};

&gmac0 {
 phy-mode = "rgmii";
 clock_in_out = "output";

 snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
 snps,reset-active-low;
 /* Reset time is 20ms, 100ms for rtl8211f */
 snps,reset-delays-us = <0 20000 100000>;

 assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;

 pinctrl-names = "default";
 pinctrl-0 = <&gmac0_miim
       &gmac0_tx_bus2
       &gmac0_rx_bus2
       &gmac0_rgmii_clk
       &gmac0_rgmii_bus>;

 tx_delay = <0x22>;
 rx_delay = <0x0e>;

 phy-handle = <&rgmii_phy0>;
 status = "okay";
};

&mdio0 {
 rgmii_phy0: phy@0 {
  compatible = "ethernet-phy-ieee802.3-c22";
  reg = <0x0>;
 };
};

&gmac1 {
 phy-mode = "rgmii";
 clock_in_out = "output";

 snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
 snps,reset-active-low;
 /* Reset time is 20ms, 100ms for rtl8211f */
 snps,reset-delays-us = <0 20000 100000>;

 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;

 pinctrl-names = "default";
 pinctrl-0 = <&gmac1m1_miim
       &gmac1m1_tx_bus2
       &gmac1m1_rx_bus2
       &gmac1m1_rgmii_clk
       &gmac1m1_rgmii_bus>;

 tx_delay = <0x21>;
 rx_delay = <0x0e>;

 phy-handle = <&rgmii_phy1>;
 status = "okay";
};

&mdio1 {
 rgmii_phy1: phy@0 {
  compatible = "ethernet-phy-ieee802.3-c22";
  reg = <0x0>;
 };
};

&gic {
 mbi-ranges = <94 31>, <229 31>, <289 31>;
};

&pcie30phy {
 status = "okay";
};

&pcie3x2 {
 reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
 vpcie3v3-supply = <&vcc3v3_m2_pcie>;
 status = "okay";
};

&pcie2x1 {
 reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
 vpcie3v3-supply = <&vcc3v3_mini_pcie>;
 status = "okay";
};

&pmu_io_domains {
 pmuio2-supply = <&vcc3v3_pmu>;
 vccio1-supply = <&vccio_acodec>;
 vccio3-supply = <&vccio_sd>;
 vccio4-supply = <&vcc_1v8>;
 vccio5-supply = <&vcc_3v3>;
 vccio6-supply = <&vcc_1v8>;
 vccio7-supply = <&vcc_3v3>;
 status = "okay";
};

&pwm8 {
 status = "okay";
};

&pwm9 {
 status = "disabled";
};

&pwm10 {
 status = "disabled";
};

&pwm14 {
 status = "disabled";
};

&spi3 {
 pinctrl-0 = <&spi3m1_pins>;
 status = "disabled";
};

&uart2 {
 status = "okay";
};

&uart3 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart3m1_xfer>;
 status = "disabled";
};

&saradc {
 vref-supply = <&vcca_1v8>;
 status = "okay";
};

&tsadc {
 rockchip,hw-tshut-mode = <1>;
 rockchip,hw-tshut-polarity = <0>;
 status = "okay";
};

&sdhci {
 assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
 assigned-clock-rates = <200000000>, <24000000>, <200000000>;
 bus-width = <8>;
 max-frequency = <200000000>;
 mmc-hs200-1_8v;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
 status = "okay";
};

&sdmmc0 {
 max-frequency = <150000000>;
 no-sdio;
 no-mmc;
 bus-width = <4>;
 cap-mmc-highspeed;
 cap-sd-highspeed;
 disable-wp;
 sd-uhs-sdr104;
 vmmc-supply = <&vcc3v3_sd>;
 vqmmc-supply = <&vccio_sd>;
 pinctrl-names = "default";
 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 status = "okay";
};

/* USB OTG/USB Host_1 USB 2.0 Comb */
&usb2phy0 {
 status = "okay";
};

&usb2phy0_host {
 phy-supply = <&vcc5v0_usb30_host>;
 status = "okay";
};

&usb2phy0_otg {
 phy-supply = <&vcc5v0_otg_vbus>;
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_host0_ohci {
 status = "okay";
};

/* USB Host_2/USB Host_3 USB 2.0 Comb */
&usb2phy1 {
 status = "okay";
};

&usb2phy1_host {
 status = "okay";
};

&usb2phy1_otg {
 phy-supply = <&vcc5v0_usb20_host>;
 status = "okay";
};

&usb_host1_ehci {
 status = "okay";
};

&usb_host1_ohci {
 status = "okay";
};

/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */
&usb_host0_xhci {
 phys = <&usb2phy0_otg>;
 phy-names = "usb2-phy";
 extcon = <&usb2phy0>;
 maximum-speed = "high-speed";
 dr_mode = "host";
 status = "okay";
};

&sata0 {
 status = "okay";
};

/* USB3.0 Host */
&usb_host1_xhci {
 status = "okay";
};

&vop {
 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 status = "okay";
};

&vop_mmu {
 status = "okay";
};

&vp0 {
 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
  reg = <ROCKCHIP_VOP2_EP_HDMI0>;
  remote-endpoint = <&hdmi_in_vp0>;
 };
};

&pinctrl {
 leds {
  user_led_pin: user-status-led-pin {
   rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 usb {
  vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
   rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
   rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en {
   rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pcie {
  vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
   rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
   rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pmic {
  pmic_int: pmic-int {
   rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]