Quelle exynos5433-tm2-common.dtsi
Sprache: unbekannt
|
|
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung Exynos5433 TM2 board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
* Common device tree source file for Samsung's TM2 and TM2E boards
* which are based on Samsung Exynos5433 SoC.
*/
/dts-v1/;
#include "exynos5433.dtsi"
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/sound/samsung-i2s.h>
/ {
aliases {
gsc0 = &gsc_0;
gsc1 = &gsc_1;
gsc2 = &gsc_2;
mmc0 = &mshc_0;
mmc2 = &mshc_2;
pinctrl0 = &pinctrl_alive;
pinctrl1 = &pinctrl_aud;
pinctrl2 = &pinctrl_cpif;
pinctrl3 = &pinctrl_ese;
pinctrl4 = &pinctrl_finger;
pinctrl5 = &pinctrl_fsys;
pinctrl6 = &pinctrl_imem;
pinctrl7 = &pinctrl_nfc;
pinctrl8 = &pinctrl_peric;
pinctrl9 = &pinctrl_touch;
serial0 = &serial_0;
serial1 = &serial_1;
serial2 = &serial_2;
serial3 = &serial_3;
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
spi3 = &spi_3;
spi4 = &spi_4;
};
chosen {
stdout-path = &serial_1;
};
memory@20000000 {
device_type = "memory";
reg = <0x0 0x20000000 0x0 0xc0000000>;
};
gpio-keys {
compatible = "gpio-keys";
power-key {
gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
};
volume-up-key {
gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
label = "volume-up key";
debounce-interval = <10>;
};
volume-down-key {
gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
label = "volume-down key";
debounce-interval = <10>;
};
homepage-key {
gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
label = "homepage key";
debounce-interval = <10>;
};
};
i2c_max98504: i2c-13 {
compatible = "i2c-gpio";
sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
max98504: amplifier@31 {
compatible = "maxim,max98504";
reg = <0x31>;
DIOVDD-supply = <&ldo3_reg>;
DVDD-supply = <&ldo3_reg>;
PVDD-supply = <&vph_pwr_regulator>;
};
};
vph_pwr_regulator: regulator-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "VPH_PWR";
regulator-min-microvolt = <4200000>;
regulator-max-microvolt = <4200000>;
};
irda_regulator: regulator-irda {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
regulator-name = "irda_regulator";
};
sound {
compatible = "samsung,tm2-audio";
audio-codec = <&wm5110>, <&hdmi>;
i2s-controller = <&i2s0 0>, <&i2s1 0>;
audio-amplifier = <&max98504>;
mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
model = "wm5110";
audio-routing = /* Headphone */
"HP", "HPOUT1L",
"HP", "HPOUT1R",
/* Speaker */
"SPK", "SPKOUT",
"SPKOUT", "HPOUT2L",
"SPKOUT", "HPOUT2R",
/* Receiver */
"RCV", "HPOUT3L",
"RCV", "HPOUT3R";
};
};
&adc {
vdd-supply = <&ldo3_reg>;
status = "okay";
thermistor-ap {
compatible = "murata,ncp03wf104";
pullup-uv = <1800000>;
pullup-ohm = <100000>;
pulldown-ohm = <0>;
io-channels = <&adc 0>;
};
thermistor-battery {
compatible = "murata,ncp03wf104";
pullup-uv = <1800000>;
pullup-ohm = <100000>;
pulldown-ohm = <0>;
io-channels = <&adc 1>;
#thermal-sensor-cells = <0>;
};
thermistor-charger {
compatible = "murata,ncp03wf104";
pullup-uv = <1800000>;
pullup-ohm = <100000>;
pulldown-ohm = <0>;
io-channels = <&adc 2>;
};
};
&bus_g2d_400 {
devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
vdd-supply = <&buck4_reg>;
exynos,saturation-ratio = <10>;
status = "okay";
};
&bus_g2d_266 {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_gscl {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_hevc {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_jpeg {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_mfc {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_mscl {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_noc0 {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_noc1 {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&bus_noc2 {
devfreq = <&bus_g2d_400>;
status = "okay";
};
&cmu_aud {
assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
<&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
<&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
<&cmu_top CLK_MOUT_AUD_PLL>,
<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
<&cmu_top CLK_MOUT_SCLK_AUDIO0>,
<&cmu_top CLK_MOUT_SCLK_AUDIO1>,
<&cmu_top CLK_MOUT_SCLK_SPDIF>,
<&cmu_aud CLK_DIV_AUD_CA5>,
<&cmu_aud CLK_DIV_ACLK_AUD>,
<&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
<&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
<&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
<&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
<&cmu_aud CLK_DIV_SCLK_AUD_UART>,
<&cmu_top CLK_DIV_SCLK_AUDIO0>,
<&cmu_top CLK_DIV_SCLK_AUDIO1>,
<&cmu_top CLK_DIV_SCLK_PCM1>,
<&cmu_top CLK_DIV_SCLK_I2S1>;
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
<&cmu_top CLK_FOUT_AUD_PLL>,
<&cmu_top CLK_MOUT_AUD_PLL>,
<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
<&cmu_top CLK_SCLK_AUDIO0>;
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
<196608001>, <65536001>, <32768001>, <49152001>,
<2048001>, <24576001>, <196608001>,
<24576001>, <98304001>, <2048001>, <49152001>;
};
&cmu_fsys {
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
<&cmu_top CLK_DIV_SCLK_USBDRD30>,
<&cmu_top CLK_DIV_SCLK_USBHOST30>;
assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
<&cmu_top CLK_MOUT_BUS_PLL_USER>,
<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
<66700000>, <66700000>;
};
&cmu_gscl {
assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
<&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
<&cmu_top CLK_ACLK_GSCL_333>;
};
&cmu_mfc {
assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
};
&cmu_mif {
assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
assigned-clock-rates = <0>, <333000000>;
};
&cmu_mscl {
assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
<&cmu_mscl CLK_MOUT_SCLK_JPEG>,
<&cmu_top CLK_MOUT_SCLK_JPEG_A>;
assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
<&cmu_top CLK_SCLK_JPEG_MSCL>,
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
<&cmu_top CLK_MOUT_BUS_PLL_USER>;
};
&cmu_top {
assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
assigned-clock-rates = <196608001>;
};
&cpu0 {
cpu-supply = <&buck3_reg>;
};
&cpu4 {
cpu-supply = <&buck2_reg>;
};
&decon {
status = "okay";
};
&decon_tv {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tv_to_hdmi: endpoint {
remote-endpoint = <&hdmi_to_tv>;
};
};
};
};
&dsi {
status = "okay";
vddcore-supply = <&ldo6_reg>;
vddio-supply = <&ldo7_reg>;
samsung,burst-clock-frequency = <512000000>;
samsung,esc-clock-frequency = <16000000>;
samsung,pll-clock-frequency = <24000000>;
pinctrl-names = "default";
pinctrl-0 = <&te_irq>;
};
&gpu {
mali-supply = <&buck6_reg>;
status = "okay";
};
&hdmi {
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
status = "okay";
vdd-supply = <&ldo6_reg>;
vdd_osc-supply = <&ldo7_reg>;
vdd_pll-supply = <&ldo6_reg>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hdmi_to_tv: endpoint {
remote-endpoint = <&tv_to_hdmi>;
};
};
port@1 {
reg = <1>;
hdmi_to_mhl: endpoint {
remote-endpoint = <&mhl_to_hdmi>;
};
};
};
};
&hsi2c_0 {
status = "okay";
clock-frequency = <2500000>;
pmic@66 {
compatible = "samsung,s2mps13-pmic";
interrupt-parent = <&gpa0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
samsung,s2mps11-wrstbi-ground;
wakeup-source;
s2mps13_osc: clocks {
compatible = "samsung,s2mps13-clk";
#clock-cells = <1>;
clock-output-names = "s2mps13_ap", "s2mps13_cp",
"s2mps13_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE_0.9V_AP";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "VDDQ_MMC2_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo3_reg: LDO3 {
regulator-name = "VDD1_E_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "VDD10_MIF_PLL_1.0V_AP";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo5_reg: LDO5 {
regulator-name = "VDD10_DPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo6_reg: LDO6 {
regulator-name = "VDD10_MIPI2L_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo7_reg: LDO7 {
regulator-name = "VDD18_MIPI2L_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo8_reg: LDO8 {
regulator-name = "VDD18_LLI_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo9_reg: LDO9 {
regulator-name = "VDD18_ABB_ETC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo10_reg: LDO10 {
regulator-name = "VDD33_USB30_3.0V_AP";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo11_reg: LDO11 {
regulator-name = "VDD_INT_M_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo12_reg: LDO12 {
regulator-name = "VDD_KFC_M_1.1V_AP";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "VDD_G3D_M_0.95V_AP";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo14_reg: LDO14 {
regulator-name = "VDDQ_M1_LDO_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo15_reg: LDO15 {
regulator-name = "VDDQ_M2_LDO_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo16_reg: LDO16 {
regulator-name = "VDDQ_EFUSE";
regulator-min-microvolt = <1400000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "V_TFLASH_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo18_reg: LDO18 {
regulator-name = "V_CODEC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "VDDA_1.8V_COMP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo20_reg: LDO20 {
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo21_reg: LDO21 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo22_reg: LDO22 {
regulator-name = "CAM_IO_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo23_reg: LDO23 {
regulator-name = "CAM_SEN_CORE_1.05V_AP";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
ldo24_reg: LDO24 {
regulator-name = "VT_CAM_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo25_reg: LDO25 {
regulator-name = "UNUSED_LDO25";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo26_reg: LDO26 {
regulator-name = "CAM_AF_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo27_reg: LDO27 {
regulator-name = "VCC_3.0V_LCD_AP";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo28_reg: LDO28 {
regulator-name = "VCC_1.8V_LCD_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo29_reg: LDO29 {
regulator-name = "VT_CAM_2.8V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo30_reg: LDO30 {
regulator-name = "TSP_AVDD_3.3V_AP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo31_reg: LDO31 {
/*
* LDO31 differs from target to target,
* its definition is in the .dts
*/
};
ldo32_reg: LDO32 {
regulator-name = "VTOUCH_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo33_reg: LDO33 {
regulator-name = "VTOUCH_LED_3.3V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
};
ldo34_reg: LDO34 {
regulator-name = "VCC_1.8V_MHL_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2100000>;
};
ldo35_reg: LDO35 {
regulator-name = "OIS_VM_2.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
};
ldo36_reg: LDO36 {
regulator-name = "VSIL_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo37_reg: LDO37 {
regulator-name = "VF_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo38_reg: LDO38 {
/*
* LDO38 differs from target to target,
* its definition is in the .dts
*/
};
ldo39_reg: LDO39 {
regulator-name = "V_HRM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo40_reg: LDO40 {
regulator-name = "V_HRM_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
buck1_reg: BUCK1 {
regulator-name = "VDD_MIF_0.9V_AP";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck2_reg: BUCK2 {
regulator-name = "VDD_EGL_1.0V_AP";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck3_reg: BUCK3 {
regulator-name = "VDD_KFC_1.0V_AP";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck4_reg: BUCK4 {
regulator-name = "VDD_INT_0.95V_AP";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck5_reg: BUCK5 {
regulator-name = "VDD_DISP_CAM0_0.9V_AP";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck6_reg: BUCK6 {
regulator-name = "VDD_G3D_0.9V_AP";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
buck7_reg: BUCK7 {
regulator-name = "VDD_MEM1_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "VDD_LLDO_1.35V_AP";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
buck9_reg: BUCK9 {
regulator-name = "VDD_MLDO_2.0V_AP";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_mem2";
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
};
};
};
&hsi2c_4 {
status = "okay";
s3fwrn5: nfc@27 {
compatible = "samsung,s3fwrn5-i2c";
reg = <0x27>;
interrupt-parent = <&gpa1>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
};
};
&hsi2c_5 {
status = "okay";
stmfts: touchscreen@49 {
compatible = "st,stmfts";
reg = <0x49>;
interrupt-parent = <&gpa1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
avdd-supply = <&ldo30_reg>;
vdd-supply = <&ldo31_reg>;
};
};
&hsi2c_7 {
status = "okay";
clock-frequency = <1000000>;
bridge@39 {
reg = <0x39>;
compatible = "sil,sii8620";
cvcc10-supply = <&ldo36_reg>;
iovcc18-supply = <&ldo34_reg>;
interrupt-parent = <&gpf0>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
clocks = <&pmu_system_controller 0>;
clock-names = "xtal";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mhl_to_hdmi: endpoint {
remote-endpoint = <&hdmi_to_mhl>;
};
};
port@1 {
reg = <1>;
mhl_to_musb_con: endpoint {
remote-endpoint = <&musb_con_to_mhl>;
};
};
};
};
};
&hsi2c_8 {
status = "okay";
pmic@66 {
compatible = "maxim,max77843";
interrupt-parent = <&gpa1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reg = <0x66>;
muic: extcon {
compatible = "maxim,max77843-muic";
musb_con: connector {
compatible = "samsung,usb-connector-11pin",
"usb-b-connector";
label = "micro-USB";
type = "micro";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
/*
* TODO: The DTS this is based on does not have
* port@0 which is a required property. The ports
* look incomplete and need fixing.
* Add a disabled port just to satisfy dtschema.
*/
reg = <0>;
status = "disabled";
};
port@3 {
reg = <3>;
musb_con_to_mhl: endpoint {
remote-endpoint = <&mhl_to_musb_con>;
};
};
};
};
ports {
port {
muic_to_usb: endpoint {
remote-endpoint = <&usb_to_muic>;
};
};
};
};
regulators {
compatible = "maxim,max77843-regulator";
safeout1_reg: SAFEOUT1 {
regulator-name = "SAFEOUT1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <4950000>;
};
safeout2_reg: SAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <4950000>;
};
charger_reg: CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <100000>;
regulator-max-microamp = <3150000>;
};
};
haptic: motor-driver {
compatible = "maxim,max77843-haptic";
haptic-supply = <&ldo38_reg>;
pwms = <&pwm 0 33670 0>;
};
};
};
&hsi2c_11 {
status = "okay";
};
&i2s0 {
status = "okay";
};
&i2s1 {
assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
status = "okay";
};
&mshc_0 {
status = "okay";
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 3>;
samsung,read-strobe-delay = <90>;
fifo-depth = <0x80>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
&sd0_bus8 &sd0_rdqs>;
bus-width = <8>;
assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
assigned-clock-rates = <800000000>;
};
&mshc_2 {
status = "okay";
cap-sd-highspeed;
disable-wp;
cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
fifo-depth = <0x80>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
};
&pcie {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pcie_bus &pcie_wlanen>;
vdd10-supply = <&ldo6_reg>;
vdd18-supply = <&ldo7_reg>;
assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
<&cmu_top CLK_MOUT_SCLK_PCIE_100>;
assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
<&cmu_top CLK_MOUT_BUS_PLL_USER>;
assigned-clock-rates = <0>, <100000000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
};
&pcie_phy {
status = "okay";
};
&ppmu_d0_general {
status = "okay";
events {
ppmu_event0_d0_general: ppmu-event0-d0-general {
event-name = "ppmu-event0-d0-general";
};
};
};
&ppmu_d1_general {
status = "okay";
events {
ppmu_event0_d1_general: ppmu-event0-d1-general {
event-name = "ppmu-event0-d1-general";
};
};
};
&pinctrl_alive {
pinctrl-names = "default";
pinctrl-0 = <&initial_alive>;
initial_alive: initial-state {
PIN_IN(gpa0-0, DOWN, FAST_SR1);
PIN_IN(gpa0-1, NONE, FAST_SR1);
PIN_IN(gpa0-2, DOWN, FAST_SR1);
PIN_IN(gpa0-3, NONE, FAST_SR1);
PIN_IN(gpa0-4, NONE, FAST_SR1);
PIN_IN(gpa0-5, DOWN, FAST_SR1);
PIN_IN(gpa0-6, NONE, FAST_SR1);
PIN_IN(gpa0-7, NONE, FAST_SR1);
PIN_IN(gpa1-0, UP, FAST_SR1);
PIN_IN(gpa1-1, UP, FAST_SR1);
PIN_IN(gpa1-2, NONE, FAST_SR1);
PIN_IN(gpa1-3, DOWN, FAST_SR1);
PIN_IN(gpa1-4, DOWN, FAST_SR1);
PIN_IN(gpa1-5, NONE, FAST_SR1);
PIN_IN(gpa1-6, NONE, FAST_SR1);
PIN_IN(gpa1-7, NONE, FAST_SR1);
PIN_IN(gpa2-0, NONE, FAST_SR1);
PIN_IN(gpa2-1, NONE, FAST_SR1);
PIN_IN(gpa2-2, NONE, FAST_SR1);
PIN_IN(gpa2-3, DOWN, FAST_SR1);
PIN_IN(gpa2-4, NONE, FAST_SR1);
PIN_IN(gpa2-5, DOWN, FAST_SR1);
PIN_IN(gpa2-6, DOWN, FAST_SR1);
PIN_IN(gpa2-7, NONE, FAST_SR1);
PIN_IN(gpa3-0, DOWN, FAST_SR1);
PIN_IN(gpa3-1, DOWN, FAST_SR1);
PIN_IN(gpa3-2, NONE, FAST_SR1);
PIN_IN(gpa3-3, DOWN, FAST_SR1);
PIN_IN(gpa3-4, NONE, FAST_SR1);
PIN_IN(gpa3-5, DOWN, FAST_SR1);
PIN_IN(gpa3-6, DOWN, FAST_SR1);
PIN_IN(gpa3-7, DOWN, FAST_SR1);
PIN_IN(gpf1-0, NONE, FAST_SR1);
PIN_IN(gpf1-1, NONE, FAST_SR1);
PIN_IN(gpf1-2, DOWN, FAST_SR1);
PIN_IN(gpf1-4, UP, FAST_SR1);
PIN_OT(gpf1-5, NONE, FAST_SR1);
PIN_IN(gpf1-6, DOWN, FAST_SR1);
PIN_IN(gpf1-7, DOWN, FAST_SR1);
PIN_IN(gpf2-0, DOWN, FAST_SR1);
PIN_IN(gpf2-1, DOWN, FAST_SR1);
PIN_IN(gpf2-2, DOWN, FAST_SR1);
PIN_IN(gpf2-3, DOWN, FAST_SR1);
PIN_IN(gpf3-0, DOWN, FAST_SR1);
PIN_IN(gpf3-1, DOWN, FAST_SR1);
PIN_IN(gpf3-2, NONE, FAST_SR1);
PIN_IN(gpf3-3, DOWN, FAST_SR1);
PIN_IN(gpf4-0, DOWN, FAST_SR1);
PIN_IN(gpf4-1, DOWN, FAST_SR1);
PIN_IN(gpf4-2, DOWN, FAST_SR1);
PIN_IN(gpf4-3, DOWN, FAST_SR1);
PIN_IN(gpf4-4, DOWN, FAST_SR1);
PIN_IN(gpf4-5, DOWN, FAST_SR1);
PIN_IN(gpf4-6, DOWN, FAST_SR1);
PIN_IN(gpf4-7, DOWN, FAST_SR1);
PIN_IN(gpf5-0, DOWN, FAST_SR1);
PIN_IN(gpf5-1, DOWN, FAST_SR1);
PIN_IN(gpf5-2, DOWN, FAST_SR1);
PIN_IN(gpf5-3, DOWN, FAST_SR1);
PIN_OT(gpf5-4, NONE, FAST_SR1);
PIN_IN(gpf5-5, DOWN, FAST_SR1);
PIN_IN(gpf5-6, DOWN, FAST_SR1);
PIN_IN(gpf5-7, DOWN, FAST_SR1);
};
te_irq: te-irq-pins {
samsung,pins = "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
};
};
&pinctrl_cpif {
pinctrl-names = "default";
pinctrl-0 = <&initial_cpif>;
initial_cpif: initial-state {
PIN_IN(gpv6-0, DOWN, FAST_SR1);
PIN_IN(gpv6-1, DOWN, FAST_SR1);
};
};
&pinctrl_ese {
pinctrl-names = "default";
pinctrl-0 = <&initial_ese>;
pcie_wlanen: pcie-wlanen-pins {
samsung,pins = "gpj2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
initial_ese: initial-state {
PIN_IN(gpj2-1, DOWN, FAST_SR1);
PIN_IN(gpj2-2, DOWN, FAST_SR1);
};
};
&pinctrl_fsys {
pinctrl-names = "default";
pinctrl-0 = <&initial_fsys>;
initial_fsys: initial-state {
PIN_IN(gpr3-0, NONE, FAST_SR1);
PIN_IN(gpr3-1, DOWN, FAST_SR1);
PIN_IN(gpr3-2, DOWN, FAST_SR1);
PIN_IN(gpr3-3, DOWN, FAST_SR1);
PIN_IN(gpr3-7, NONE, FAST_SR1);
};
};
&pinctrl_imem {
pinctrl-names = "default";
pinctrl-0 = <&initial_imem>;
initial_imem: initial-state {
PIN_IN(gpf0-0, UP, FAST_SR1);
PIN_IN(gpf0-1, UP, FAST_SR1);
PIN_IN(gpf0-2, DOWN, FAST_SR1);
PIN_IN(gpf0-3, UP, FAST_SR1);
PIN_IN(gpf0-4, DOWN, FAST_SR1);
PIN_IN(gpf0-5, NONE, FAST_SR1);
PIN_IN(gpf0-6, DOWN, FAST_SR1);
PIN_IN(gpf0-7, UP, FAST_SR1);
};
};
&pinctrl_nfc {
pinctrl-names = "default";
pinctrl-0 = <&initial_nfc>;
initial_nfc: initial-state {
PIN_IN(gpj0-2, DOWN, FAST_SR1);
};
};
&pinctrl_peric {
pinctrl-names = "default";
pinctrl-0 = <&initial_peric>;
initial_peric: initial-state {
PIN_IN(gpv7-0, DOWN, FAST_SR1);
PIN_IN(gpv7-1, DOWN, FAST_SR1);
PIN_IN(gpv7-2, NONE, FAST_SR1);
PIN_IN(gpv7-3, DOWN, FAST_SR1);
PIN_IN(gpv7-4, DOWN, FAST_SR1);
PIN_IN(gpv7-5, DOWN, FAST_SR1);
PIN_IN(gpb0-4, DOWN, FAST_SR1);
PIN_IN(gpc0-2, DOWN, FAST_SR1);
PIN_IN(gpc0-5, DOWN, FAST_SR1);
PIN_IN(gpc0-7, DOWN, FAST_SR1);
PIN_IN(gpc1-1, DOWN, FAST_SR1);
PIN_IN(gpc3-4, NONE, FAST_SR1);
PIN_IN(gpc3-5, NONE, FAST_SR1);
PIN_IN(gpc3-6, NONE, FAST_SR1);
PIN_IN(gpc3-7, NONE, FAST_SR1);
PIN_OT(gpg0-0, NONE, FAST_SR1);
PIN_F2(gpg0-1, DOWN, FAST_SR1);
PIN_IN(gpd2-5, DOWN, FAST_SR1);
PIN_IN(gpd4-0, NONE, FAST_SR1);
PIN_IN(gpd4-1, DOWN, FAST_SR1);
PIN_IN(gpd4-2, DOWN, FAST_SR1);
PIN_IN(gpd4-3, DOWN, FAST_SR1);
PIN_IN(gpd4-4, DOWN, FAST_SR1);
PIN_IN(gpd6-3, DOWN, FAST_SR1);
PIN_IN(gpd8-1, UP, FAST_SR1);
PIN_IN(gpg1-0, DOWN, FAST_SR1);
PIN_IN(gpg1-1, DOWN, FAST_SR1);
PIN_IN(gpg1-2, DOWN, FAST_SR1);
PIN_IN(gpg1-3, DOWN, FAST_SR1);
PIN_IN(gpg1-4, DOWN, FAST_SR1);
PIN_IN(gpg2-0, DOWN, FAST_SR1);
PIN_IN(gpg2-1, DOWN, FAST_SR1);
PIN_IN(gpg3-0, DOWN, FAST_SR1);
PIN_IN(gpg3-1, DOWN, FAST_SR1);
PIN_IN(gpg3-5, DOWN, FAST_SR1);
};
};
&pinctrl_touch {
pinctrl-names = "default";
pinctrl-0 = <&initial_touch>;
initial_touch: initial-state {
PIN_IN(gpj1-2, DOWN, FAST_SR1);
};
};
&pwm {
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
status = "okay";
};
&mic {
status = "okay";
};
&pmu_system_controller {
assigned-clocks = <&pmu_system_controller 0>;
assigned-clock-parents = <&xxti>;
};
&serial_1 {
status = "okay";
};
&serial_3 {
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
clock-names = "extclk";
};
};
&spi_1 {
cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
status = "okay";
wm5110: audio-codec@0 {
compatible = "wlf,wm5110";
reg = <0x0>;
spi-max-frequency = <20000000>;
interrupt-parent = <&gpa0>;
interrupts = <4 IRQ_TYPE_NONE>;
clocks = <&pmu_system_controller 0>,
<&s2mps13_osc S2MPS11_CLK_BT>;
clock-names = "mclk1", "mclk2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
wlf,micd-detect-debounce = <300>;
wlf,micd-bias-start-time = <0x1>;
wlf,micd-rate = <0x7>;
wlf,micd-dbtime = <0x2>;
wlf,micd-force-micbias;
wlf,micd-configs = <0x0 1 0>;
wlf,hpdet-channel = <1>;
wlf,gpsw = <0x1>;
wlf,inmode = <2 0 2 0>;
wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
/* core supplies */
AVDD-supply = <&ldo18_reg>;
DBVDD1-supply = <&ldo18_reg>;
CPVDD-supply = <&ldo18_reg>;
DBVDD2-supply = <&ldo18_reg>;
DBVDD3-supply = <&ldo18_reg>;
SPKVDDL-supply = <&vph_pwr_regulator>;
SPKVDDR-supply = <&vph_pwr_regulator>;
controller-data {
samsung,spi-feedback-delay = <0>;
};
};
};
&spi_3 {
status = "okay";
no-cs-readback;
irled@0 {
compatible = "ir-spi-led";
reg = <0x0>;
spi-max-frequency = <5000000>;
power-supply = <&irda_regulator>;
duty-cycle = /bits/ 8 <60>;
led-active-low;
controller-data {
samsung,spi-feedback-delay = <0>;
};
};
};
&timer {
clock-frequency = <24000000>;
};
&tmu_atlas0 {
vtmu-supply = <&ldo3_reg>;
status = "okay";
};
&tmu_apollo {
vtmu-supply = <&ldo3_reg>;
status = "okay";
};
&tmu_g3d {
vtmu-supply = <&ldo3_reg>;
status = "okay";
};
&usbdrd30 {
vdd33-supply = <&ldo10_reg>;
vdd10-supply = <&ldo6_reg>;
status = "okay";
};
&usbdrd_dwc3 {
dr_mode = "otg";
};
&usbdrd30_phy {
vbus-supply = <&safeout1_reg>;
status = "okay";
port {
usb_to_muic: endpoint {
remote-endpoint = <&muic_to_usb>;
};
};
};
&xxti {
clock-frequency = <24000000>;
};
[ Dauer der Verarbeitung: 0.56 Sekunden
(vorverarbeitet)
]
|
2026-04-07
|
