// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-mmp/time.c
*
* Support for clocksource and clockevents
*
* Copyright (C) 2008 Marvell International Ltd.
* All rights reserved.
*
* 2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
* 2008-10-08: Bin Yang <bin.yang@marvell.com>
*
* The timers module actually includes three timers, each timer with up to
* three match comparators. Timer #0 is used here in free-running mode as
* the clock source, and match comparator #1 used as clock event device.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
#include <asm /mach/time.h>
#include "regs-timers.h"
#include <linux/soc/mmp/cputype.h>
#define MAX_DELTA (0 xfffffffe)
#define MIN_DELTA (16 )
static void __iomem *mmp_timer_base;
/*
* Read the timer through the CVWR register. Delay is required after requesting
* a read. The CR register cannot be directly read due to metastability issues
* documented in the PXA168 software manual.
*/
static inline uint32_t timer_read(void )
{
uint32_t val;
int delay = 3 ;
__raw_writel(1 , mmp_timer_base + TMR_CVWR(1 ));
while (delay--)
val = __raw_readl(mmp_timer_base + TMR_CVWR(1 ));
return val;
}
static u64 notrace mmp_read_sched_clock(void )
{
return timer_read();
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
/*
* Clear pending interrupt status.
*/
__raw_writel(0 x01, mmp_timer_base + TMR_ICR(0 ));
/*
* Disable timer 0.
*/
__raw_writel(0 x02, mmp_timer_base + TMR_CER);
c->event_handler(c);
return IRQ_HANDLED;
}
static int timer_set_next_event(unsigned long delta,
struct clock_event_device *dev)
{
unsigned long flags;
local_irq_save(flags);
/*
* Disable timer 0.
*/
__raw_writel(0 x02, mmp_timer_base + TMR_CER);
/*
* Clear and enable timer match 0 interrupt.
*/
__raw_writel(0 x01, mmp_timer_base + TMR_ICR(0 ));
__raw_writel(0 x01, mmp_timer_base + TMR_IER(0 ));
/*
* Setup new clockevent timer value.
*/
__raw_writel(delta - 1 , mmp_timer_base + TMR_TN_MM(0 , 0 ));
/*
* Enable timer 0.
*/
__raw_writel(0 x03, mmp_timer_base + TMR_CER);
local_irq_restore(flags);
return 0 ;
}
static int timer_set_shutdown(struct clock_event_device *evt)
{
unsigned long flags;
local_irq_save(flags);
/* disable the matching interrupt */
__raw_writel(0 x00, mmp_timer_base + TMR_IER(0 ));
local_irq_restore(flags);
return 0 ;
}
static struct clock_event_device ckevt = {
.name = "clockevent" ,
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 200 ,
.set_next_event = timer_set_next_event,
.set_state_shutdown = timer_set_shutdown,
.set_state_oneshot = timer_set_shutdown,
};
static u64 clksrc_read(struct clocksource *cs)
{
return timer_read();
}
static struct clocksource cksrc = {
.name = "clocksource" ,
.rating = 200 ,
.read = clksrc_read,
.mask = CLOCKSOURCE_MASK(32 ),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init timer_config(void )
{
uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
__raw_writel(0 x0, mmp_timer_base + TMR_CER); /* disable */
ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ?
(TMR_CCR_CS_0(0 ) | TMR_CCR_CS_1(0 )) :
(TMR_CCR_CS_0(3 ) | TMR_CCR_CS_1(3 ));
__raw_writel(ccr, mmp_timer_base + TMR_CCR);
/* set timer 0 to periodic mode, and timer 1 to free-running mode */
__raw_writel(0 x2, mmp_timer_base + TMR_CMR);
__raw_writel(0 x1, mmp_timer_base + TMR_PLCR(0 )); /* periodic */
__raw_writel(0 x7, mmp_timer_base + TMR_ICR(0 )); /* clear status */
__raw_writel(0 x0, mmp_timer_base + TMR_IER(0 ));
__raw_writel(0 x0, mmp_timer_base + TMR_PLCR(1 )); /* free-running */
__raw_writel(0 x7, mmp_timer_base + TMR_ICR(1 )); /* clear status */
__raw_writel(0 x0, mmp_timer_base + TMR_IER(1 ));
/* enable timer 1 counter */
__raw_writel(0 x2, mmp_timer_base + TMR_CER);
}
static void __init mmp_timer_init(int irq, unsigned long rate)
{
timer_config();
sched_clock_register(mmp_read_sched_clock, 32 , rate);
ckevt.cpumask = cpumask_of(0 );
if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"timer" , &ckevt))
pr_err("Failed to request irq %d (timer)\n" , irq);
clocksource_register_hz(&cksrc, rate);
clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
}
static int __init mmp_dt_init_timer(struct device_node *np)
{
struct clk *clk;
int irq, ret;
unsigned long rate;
clk = of_clk_get(np, 0 );
if (!IS_ERR(clk)) {
ret = clk_prepare_enable(clk);
if (ret)
return ret;
rate = clk_get_rate(clk);
} else if (cpu_is_pj4()) {
rate = 6500000 ;
} else {
rate = 3250000 ;
}
irq = irq_of_parse_and_map(np, 0 );
if (!irq)
return -EINVAL;
mmp_timer_base = of_iomap(np, 0 );
if (!mmp_timer_base)
return -ENOMEM;
mmp_timer_init(irq, rate);
return 0 ;
}
TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer" , mmp_dt_init_timer);
Messung V0.5 in Prozent C=96 H=96 G=95
¤ Dauer der Verarbeitung: 0.11 Sekunden
(vorverarbeitet am 2026-06-08)
¤
*© Formatika GbR, Deutschland