Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
// SPDX-License-Identifier: GPL-
2.
0
/*
* Samsung's Exynos4210 based Trats board device tree source
*
* Copyright (c)
2012 Samsung Electronics Co., Ltd.
*
http://www.samsung.com
*
* Device tree source file for Samsung's Trats board which is based on
* Samsung's Exynos4210 SoC.
*/
/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats based on Exynos4210";
compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
chassis-type = "handset";
memory@
40000000 {
device_type = "memory";
reg = <
0x40000000
0x10000000
0x50000000
0x10000000
0x60000000
0x10000000
0x70000000
0x10000000>;
};
aliases {
mmc0 = &sdhci_0;
mmc1 = &sdhci_2;
mmc2 = &sdhci_3;
};
chosen {
bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=
5";
stdout-path = "serial2:
115200n8";
};
vemmc_reg: regulator-
0 {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.
8V";
regulator-min-microvolt = <
2800000>;
regulator-max-microvolt = <
2800000>;
gpio = <&gpk0
2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
tsp_reg: regulator-
1 {
compatible = "regulator-fixed";
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <
2800000>;
regulator-max-microvolt = <
2800000>;
gpio = <&gpl0
3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cam_af_28v_reg: regulator-
2 {
compatible = "regulator-fixed";
regulator-name = "
8M_AF_2.
8V_EN";
regulator-min-microvolt = <
2800000>;
regulator-max-microvolt = <
2800000>;
gpio = <&gpk1
1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cam_io_en_reg: regulator-
3 {
compatible = "regulator-fixed";
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <
2800000>;
regulator-max-microvolt = <
2800000>;
gpio = <&gpe2
1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cam_io_12v_reg: regulator-
4 {
compatible = "regulator-fixed";
regulator-name = "
8M_1.
2V_EN";
regulator-min-microvolt = <
1200000>;
regulator-max-microvolt = <
1200000>;
gpio = <&gpe2
5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vt_core_15v_reg: regulator-
5 {
compatible = "regulator-fixed";
regulator-name = "VT_CORE_1.
5V";
regulator-min-microvolt = <
1500000>;
regulator-max-microvolt = <
1500000>;
gpio = <&gpe2
2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
gpio-keys {
compatible = "gpio-keys";
vol-down-key {
gpios = <&gpx2
1 GPIO_ACTIVE_LOW>;
linux,code = <
114>;
label = "volume down";
debounce-interval = <
10>;
};
vol-up-key {
gpios = <&gpx2
0 GPIO_ACTIVE_LOW>;
linux,code = <
115>;
label = "volume up";
debounce-interval = <
10>;
};
power-key {
gpios = <&gpx2
7 GPIO_ACTIVE_LOW>;
linux,code = <
116>;
label = "power";
debounce-interval = <
10>;
wakeup-source;
};
ok-key {
gpios = <&gpx3
5 GPIO_ACTIVE_LOW>;
linux,code = <
352>;
label = "ok";
debounce-interval = <
10>;
};
};
wlan_pwrseq: sdhci3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpl1
2 GPIO_ACTIVE_LOW>;
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
clock-frequency = <
0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <
24000000>;
};
pmic_ap_clk: pmic-ap-clk {
/* Workaround for missing clock on max8997 PMIC */
compatible = "fixed-clock";
#clock-cells = <
0>;
clock-frequency = <
32768>;
};
};
};
&camera {
status = "okay";
};
&cpu0 {
cpu0-supply = <&varm_breg>;
};
&cpu_thermal {
cooling-maps {
map0 {
/* Corresponds to
800MHz at freq_table */
cooling-device = <&cpu0
2 2>, <&cpu1
2 2>;
};
map1 {
/* Corresponds to
200MHz at freq_table */
cooling-device = <&cpu0
4 4>, <&cpu1
4 4>;
};
};
};
&dsi_0 {
vddcore-supply = <&vusb_reg>;
vddio-supply = <&vmipi_reg>;
samsung,burst-clock-frequency = <
500000000>;
samsung,esc-clock-frequency = <
20000000>;
samsung,pll-clock-frequency = <
24000000>;
status = "okay";
panel@
0 {
reg = <
0>;
compatible = "samsung,s6e8aa0";
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
reset-gpios = <&gpy4
5 GPIO_ACTIVE_HIGH>;
power-on-delay = <
50>;
reset-delay = <
100>;
init-delay = <
100>;
flip-horizontal;
flip-vertical;
panel-width-mm = <
58>;
panel-height-mm = <
103>;
display-timings {
timing-
0 {
clock-frequency = <
57153600>;
hactive = <
720>;
vactive = <
1280>;
hfront-porch = <
5>;
hback-porch = <
5>;
hsync-len = <
5>;
vfront-porch = <
13>;
vback-porch = <
1>;
vsync-len = <
2>;
};
};
};
};
&exynos_usbphy {
status = "okay";
vbus-supply = <&safe1_sreg>;
};
&fimc_0 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <
0>, <
160000000>;
};
&fimc_1 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <
0>, <
160000000>;
};
&fimc_2 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
<&clock CLK_SCLK_FIMC2>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <
0>, <
160000000>;
};
&fimc_3 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
<&clock CLK_SCLK_FIMC3>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <
0>, <
160000000>;
};
&fimd {
status = "okay";
};
&gpu {
status = "okay";
};
&hsotg {
vusb_d-supply = <&vusb_reg>;
vusb_a-supply = <&vusbdac_reg>;
dr_mode = "peripheral";
status = "okay";
};
&i2c_3 {
samsung,i2c-sda-delay = <
100>;
samsung,i2c-slave-addr = <
0x10>;
samsung,i2c-max-bus-freq = <
400000>;
pinctrl-
0 = <&i2c3_bus>;
pinctrl-names = "default";
status = "okay";
touchscreen@
48 {
compatible = "melfas,mms114";
reg = <
0x48>;
interrupt-parent = <&gpx0>;
interrupts = <
4 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <
720>;
touchscreen-size-y = <
1280>;
avdd-supply = <&tsp_reg>;
vdd-supply = <&tsp_reg>;
};
};
&i2c_5 {
samsung,i2c-sda-delay = <
100>;
samsung,i2c-slave-addr = <
0x10>;
samsung,i2c-max-bus-freq = <
100000>;
pinctrl-
0 = <&i2c5_bus>;
pinctrl-names = "default";
status = "okay";
pmic@
66 {
compatible = "maxim,max8997-pmic";
reg = <
0x66>;
interrupts-extended = <&gpx0
7 IRQ_TYPE_LEVEL_LOW>,
<&gpx2
3 IRQ_TYPE_EDGE_FALLING>;
max8997,pmic-buck1-uses-gpio-dvs;
max8997,pmic-buck2-uses-gpio-dvs;
max8997,pmic-buck5-uses-gpio-dvs;
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <
0>;
max8997,pmic-buck125-dvs-gpios = <&gpx0
5 GPIO_ACTIVE_HIGH>,
<&gpx0
6 GPIO_ACTIVE_HIGH>,
<&gpl0
0 GPIO_ACTIVE_HIGH>;
max8997,pmic-buck1-dvs-voltage = <
1350000>, <
1300000>,
<
1250000>, <
1200000>,
<
1150000>, <
1100000>,
<
1000000>, <
950000>;
max8997,pmic-buck2-dvs-voltage = <
1100000>, <
1000000>,
<
950000>, <
900000>,
<
1100000>, <
1000000>,
<
950000>, <
900000>;
max8997,pmic-buck5-dvs-voltage = <
1200000>, <
1200000>,
<
1200000>, <
1200000>,
<
1200000>, <
1200000>,
<
1200000>, <
1200000>;
regulators {
valive_reg: LDO2 {
regulator-name = "VALIVE_1.
1V_C210";
regulator-min-microvolt = <
1100000>;
regulator-max-microvolt = <
1100000>;
regulator-always-on;
};
vusb_reg: LDO3 {
regulator-name = "VUSB_1.
1V_C210";
regulator-min-microvolt = <
1100000>;
regulator-max-microvolt = <
1100000>;
};
vmipi_reg: LDO4 {
regulator-name = "VMIPI_1.
8V";
regulator-min-microvolt = <
1800000>;
regulator-max-microvolt = <
1800000>;
};
vpda_reg: LDO6 {
regulator-name = "VCC_1.
8V_PDA";
regulator-min-microvolt = <
1800000>;
regulator-max-microvolt = <
1800000>;
regulator-always-on;
};
vcam_reg: LDO7 {
regulator-name = "CAM_ISP_1.
8V";
regulator-min-microvolt = <
1800000>;
regulator-max-microvolt = <
1800000>;
};
vusbdac_reg: LDO8 {
regulator-name = "VUSB+VDAC_3.
3V_C210";
regulator-min-microvolt = <
3300000>;
regulator-max-microvolt = <
3300000>;
};
vccpda_reg: LDO9 {
regulator-name = "VCC_2.
8V_PDA";
regulator-min-microvolt = <
2800000>;
regulator-max-microvolt = <
2800000>;
regulator-always-on;
};
vpll_reg: LDO10 {
regulator-name = "VPLL_1.
1V_C210";
regulator-min-microvolt = <
1100000>;
regulator-max-microvolt = <
1100000>;
regulator-always-on;
};
vtcam_reg: LDO12 {
regulator-name = "VT_CAM_1.
8V";
regulator-min-microvolt = <
1800000>;
regulator-max-microvolt = <
1800000>;
};
vcclcd_reg: LDO13 {
regulator-name = "VCC_3.
3V_LCD";
regulator-min-microvolt = <
3300000>;
regulator-max-microvolt = <
3300000>;
};
vlcd_reg: LDO15 {
regulator-name = "VLCD_2.
2V";
regulator-min-microvolt = <
2200000>;
regulator-max-microvolt = <
2200000>;
};
camsensor_reg: LDO16 {
regulator-name = "CAM_SENSOR_IO_1.
8V";
regulator-min-microvolt = <
1800000>;
regulator-max-microvolt = <
1800000>;
};
tflash_reg: LDO17 {
regulator-name = "VTF_2.
8V";
regulator-min-microvolt = <
2800000>;
regulator-max-microvolt = <
2800000>;
};
vddq_reg: LDO21 {
regulator-name = "VDDQ_M1M2_1.
2V";
regulator-min-microvolt = <
1200000>;
regulator-max-microvolt = <
1200000>;
regulator-always-on;
};
varm_breg: BUCK1 {
regulator-name = "VARM_1.
2V_C210";
regulator-min-microvolt = <
900000>;
regulator-max-microvolt = <
1350000>;
regulator-always-on;
};
vint_breg: BUCK2 {
regulator-name = "VINT_1.
1V_C210";
regulator-min-microvolt = <
900000>;
regulator-max-microvolt = <
1100000>;
regulator-always-on;
};
camisp_breg: BUCK4 {
regulator-name = "CAM_ISP_CORE_1.
2V";
regulator-min-microvolt = <
1200000>;
regulator-max-microvolt = <
1200000>;
};
vmem_breg: BUCK5 {
regulator-name = "VMEM_1.
2V_C210";
regulator-min-microvolt = <
1200000>;
regulator-max-microvolt = <
1200000>;
regulator-always-on;
};
vccsub_breg: BUCK7 {
regulator-name = "VCC_SUB_2.
0V";
regulator-min-microvolt = <
2000000>;
regulator-max-microvolt = <
2000000>;
regulator-always-on;
};
safe1_sreg: ESAFEOUT1 {
regulator-name = "SAFEOUT1";
};
safe2_sreg: ESAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-boot-on;
};
EN32KHZ_AP {
regulator-name = "EN32KHZ_AP";
regulator-always-on;
};
EN32KHZ_CP {
regulator-name = "EN32KHZ_CP";
regulator-always-on;
};
};
};
};
&pinctrl_1 {
bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl1-
0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-
6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-
1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
clock-names = "rtc", "rtc_src";
};
&sdhci_0 {
bus-width = <
8>;
non-removable;
pinctrl-
0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
pinctrl-names = "default";
vmmc-supply = <&vemmc_reg>;
status = "okay";
};
&sdhci_2 {
bus-width = <
4>;
pinctrl-
0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&tflash_reg>;
cd-gpios = <&gpx3
4 GPIO_ACTIVE_LOW>;
status = "okay";
};
&sdhci_3 {
status = "okay";
#address-cells = <
1>;
#size-cells = <
0>;
non-removable;
bus-width = <
4>;
mmc-pwrseq = <&wlan_pwrseq>;
vmmc-supply = <&tflash_reg>;
pinctrl-names = "default";
pinctrl-
0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
brcmf: wifi@
1 {
compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
reg = <
1>;
interrupt-parent = <&gpx2>;
interrupts = <
5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
};
};
&serial_0 {
status = "okay";
pinctrl-
0 = <&uart0_data &uart0_fctl>;
pinctrl-names = "default";
bluetooth {
compatible = "brcm,bcm4330-bt";
pinctrl-
0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
pinctrl-names = "default";
shutdown-gpios = <&gpl1
0 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpx3
1 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpx2
6 GPIO_ACTIVE_HIGH>;
};
};
&serial_1 {
status = "okay";
};
&serial_2 {
status = "okay";
};
&serial_3 {
status = "okay";
};
&tmu {
status = "okay";
};
